Nokia 2118 User Manual

Nokia 2118

User’s Guide

Contents

Answer calls.................................................. 9

Answer a call with

For your safety......................... 4

Welcome................................... 6

Get help.................................................... 6

Find your phone label....................... 6

Updates....................................................... 6

the keypad locked.................................... 9

Adjust the volume during a call .......... 9

Loudspeaker............................................... 9

Options during a call............................... 9

Keyguard........................................................ 9

Use the flashlight..................................... 10

1. Nokia 2118 phone

at a glance.................................... 1

Standby mode screen................................. 2

Quick keys...................................................... 2

Indicators and icons ................................... 2

Get the most out of this guide................ 3

Phone menus................................................ 3

Scroll method............................................ 4

Shortcuts.................................................... 4

In-phone help ........................................... 4

3. Text entry................................ 11

Standard mode.......................................... 11

Text (Abc)................................................ 11

Numbers (123)....................................... 11

Punctuation and special

characters................................................ 11

Delete text .............................................. 11

Predictive text input................................ 11

Activate and deactivate...................... 12

Enter text ................................................ 12

Delete text .............................................. 12

2. Set up your phone................... 5

Antenna.......................................................... 5

Battery............................................................ 5

Remove the back cover.......................... 5

Remove the battery................................. 5

Replace the battery................................. 5

Replace the back cover .......................... 6

Charge the battery .................................. 6

Turn your phone on or off......................... 6

Connect the headset .................................. 6

Change the Xpress-on™ covers............... 7

Remove the back cover.......................... 7

Insert a photo in the back cover ......... 7

Make a call.................................................... 8

Use the keypad ......................................... 8

Use the save contact option................. 8

Use the contacts list............................... 8

Use the last dialled number.................. 8

A conference call ..................................... 8

4. Contacts list ........................... 13

Search.......................................................... 13

Add new contacts..................................... 13

Save a name and number................... 13

Save a number (only)........................... 13

Save an entry ......................................... 13

Save voice mail dialling code............ 13

Save addresses and notes................... 14

Save multiple numbers........................ 15

Set up voice tags................................... 15

Set up caller groups ............................. 15

Set up speed dialling............................ 16

Edit contacts list entries......................... 16

Edit phone number............................... 16

E-mail address entry............................ 17

Edit web address................................... 18

Delete contacts list entries.................... 18

iii

Add number list entries.......................... 18

Settings....................................................... 18

Voice tags................................................... 18

My number................................................. 19

Caller groups.............................................. 19

Send and receive contacts

6. Call register............................. 29

View missed calls...................................... 29

View received calls................................... 29

View dialled numbers.............................. 29

Call times.................................................... 30

Delete call registers ................................. 30

Duration of calls....................................... 30

Last call.................................................... 30

Show call time on display .................. 30

Dialled calls ............................................ 30

Received calls......................................... 30

All calls..................................................... 31

Life timer................................................. 31

Clear timers ............................................ 31

Duration of data/fax calls...................... 31

Duration of minibrowser........................ 31

(business cards)......................................... 19

Send a business card............................ 19

5. Messages ................................ 20

Text messages ........................................... 20

Write and send ...................................... 21

Templates................................................ 21

Create a distribution list..................... 21

Send a message to

a distribution list................................... 21

Read and reply....................................... 22

Choose a message option................... 22

Change sending options ..................... 23

Change other settings......................... 23

Voice messages......................................... 24

Save voice mailbox number............... 24

Call and set up your voice mail ........ 24

Listen to your voice messages........... 24

Automate voice mail............................ 25

Picture messages...................................... 25

Write and send ...................................... 25

View a picture message ...................... 26

Minibrowser messages............................ 26

Message folders........................................ 26

Save messages to folders.................... 26

Save the message to

another folder........................................ 26

View saved messages........................... 27

Inbox folder ............................................ 27

Sent items folder................................... 27

Archive folder......................................... 27

Templates folder.................................... 27

My folders............................................... 27

Delete messages ....................................... 28

Delete a single message...................... 28

Delete all messages in a folder......... 28

7. Profiles.................................... 33

Activate....................................................... 33

Personalise a profile ................................ 33

Set a timed profile ................................... 33

8. Settings................................... 34

Call settings ............................................... 34

Anykey answer....................................... 34

Automatic redial ................................... 34

Speed dialling......................................... 34

Minibrowser confirmation.................. 34

Calling card............................................. 34

Data or fax calls.................................... 35

Data transfer.......................................... 36

Call summary ......................................... 36

Phone settings........................................... 36

Phone language..................................... 36

Automatic keyguard............................. 36

DTMF tones............................................. 37

Welcome note........................................ 37

Banner...................................................... 37

Help text activation ............................. 38

Display brightness................................. 38

Time and date settings ........................... 38

Time .......................................................... 38

Date .......................................................... 38

Set the auto-update of date

Send a note............................................. 49

Receive a note in calendar format... 50

Calculator ................................................... 50

Currency converter............................... 50

Countdown timer ..................................... 51

Set the countdown timer.................... 51

Change the time.................................... 51

Stop the timer before

the alarm sounds .................................. 52

Stopwatch .................................................. 52

Split or lap time..................................... 52

Save, view or delete times.................. 52

Operation note....................................... 53

and time .................................................. 39

Tone settings ............................................. 39

Enhancement settings ............................ 39

Security settings....................................... 39

Restrict calls........................................... 39

Access codes........................................... 40

Voice privacy.......................................... 41

Network....................................................... 42

Network services features...................... 42

Store a feature code ............................ 42

Call diverting.......................................... 42

Call waiting ............................................ 43

Restore factory settings ......................... 43

11.Games .................................... 54

Play a game................................................ 54

Game settings............................................ 54

12.Minibrowser .......................... 55

Mobile Internet access............................ 55

Sign on to the mobile Internet............. 55

Navigate the mobile Internet................ 56

Phone keys.............................................. 56

Receive a call while online................. 56

Disconnect .............................................. 56

9. Voice....................................... 44

Voice dialling............................................. 44

Assign a voice tag to an entry .......... 44

Dial a number ........................................ 44

Voice tags................................................ 45

Voice commands....................................... 45

Add a voice tag...................................... 45

Activate a voice command................. 45

Voice tag options.................................. 46

Voice recorder ........................................... 46

Record speech or sound...................... 46

Voice recorder options ........................ 46

13.PC connectivity..................... 57

14.Enhancements....................... 58

15.Reference information.......... 60

Batteries and chargers............................ 60

Nokia Battery Authentication Guidelines

(for batteries with Nokia Hologram

10.Organiser............................... 47

Alarm clock ................................................ 47

Set an alarm........................................... 47

Alarm conditions................................... 47

Turn an alarm off.................................. 47

Calendar...................................................... 48

Open ......................................................... 48

Go to a date............................................ 48

Note a specific date............................. 48

View notes (day view).......................... 49

Options while viewing a list

labels)........................................................... 61

16.Care and maintenance.......... 63

17.Additional safety

information........................... 64

Index.............................................69

of notes.................................................... 49

For your safety

Read these simple guidelines. Not

following them may be dangerous or

illegal. Read the complete user guide for

further information.

Switch off near blasting

Follow any restrictions. Do

not use the phone where

blasting is in progress.

Use sensibly

Use only in the normal

Switch on safely

Do not switch the phone on

position as explained in the

product documentation. Do

not touch the antenna

unnecessarily.

when wireless phone use is

prohibited or when it may

cause interference or danger.

Road safety comes first

Obey all local laws. Always

Qualified service

Only qualified personnel may

install or repair this product.

keep your hands free to

operate the vehicle while

driving. Your first

consideration while driving

should be road safety.

Enhancements and batteries

Use only approved

enhancements and batteries.

Do not connect incompatible

products.

Interference

Do not switch the device on

when wireless phone use is

prohibited or when it may

cause interference or danger.

Water-resistance

Your phone is not water-

resistant. Keep it dry.

Switch off in hospitals

Follow any restrictions.

Backup copies

Remember to make backup

Switch the phone off near

medical equipment.

copies or keep a written

record of all important

information stored in your

phone.

Switch off in aircraft

Follow any restrictions.

Wireless devices can cause

interference in aircraft.

Connecting to other devices

When connecting to any

other device, read its user

guide for detailed safety

instructions. Do not connect

incompatible products.

Switch off when refueling

Don't use the phone at a

refueling point. Don't use

near fuel or chemicals.

Emergency calls

what charges will apply. Some networks

may have limitations that affect how you

can use Network Services. For instance,

some networks may not support all

language-dependent characters and

services.

Ensure the phone is switched

on and in service. Press the

end key as many times as

needed to clear the display

and return to the main

screen. Key in the emergency

number, then press the call

key. Give your location. Do

not end the call until given

permission to do so.

Your service provider may have requested

that certain features be disabled or not

activated in your device. If so, they will

not appear on your device menu. Contact

your service provider for more

About your phone

information.

The wireless phone described in this

guide is approved for use on the CDMA

800 network. Contact your service

provider for more information about

networks.

Shared memory

The following features in this device may

share memory: contacts, text messages,

ring tones, calendar, and games. Use of

one or more of these features may reduce

the memory available for the remaining

features sharing memory. Your phone

may display a message that the memory

is full when you try to use a shared

memory feature. In this case, delete some

of the information or entries stored in the

shared memory features before

When using the features in this device,

obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in

this device, other than the alarm

clock, the phone must be

switched on. Do not switch the

device on when wireless phone

use may cause interference or

danger.

continuing. Some of the features, such as

messages and ring tones may have a

certain amount of memory specially

allotted to them in addition to the

Network Services

memory shared with other features.

To use the phone you must have service

from a wireless service provider. Many of

the features in this device depend on

features in the wireless network to

function. These Network Services may

not be available on all networks or you

may have to make specific arrangements

with your service provider before you can

utilize Network Services. Your service

provider may need to give you additional

instructions for their use and explain

vii

Welcome

Congratulations on your purchase of

the Nokia 2118 mobile phone. Your

phone provides many functions

which are practical for daily use,

such as a hands-free loudspeaker,

alarm clock, calculator, calendar,

and more. To personalise your phone,

you can set your favourite ring tones

and select an Xpress-on^TMcolour

cover.

■ Get help

Find your phone label

If you need help, Nokia Customer

Care is available for assistance.

Before calling, we recommend that

you write down the electronic serial

number (ESN) and have it available.

The ESN is found on the type label,

which is located beneath the battery

on the back of the phone.

Updates

From time to time, Nokia updates

this guide to reflect changes. The

latest version may be available at

www.nokia-asia.com.

viii

N o k i a 2 1 1 8 p h o n e a t

g l a n c e

1. Nokia 2118 phone at a glance

Power key (1)

Earpiece (2)

Microphone (7)

Charger port (8)

Scroll up and down key (9)

Call key (10)

Right selection key (3)

End key (4)

Keypad (5)

Left selection key (11)

Screen (12)

Connection port (6)

N o k i a 2 1 1 8 p h o n e a t

g l a n c e

Menu (3) — Press the left selection

key to select this option.

■ Standby mode screen

The standby mode screen is home

base and indicates your phone is in

standby mode.

Contacts (4) — Press the right

selection key to select this option.

■ Quick keys

In the standby mode, the scroll key

functions as follows:

Scroll up key — Activate the

flashlight.

Signal strength (1) — A higher bar

indicates more power in the signal.

Scroll down key — Go to the contacts

list.

Battery level (2) — A higher bar

indicates more power in the battery.

■ Indicators and icons

Icon

Indicates...

You have one or more text or picture messages.

See ”Read and reply” on page 22.

You are making or answering a call with the device.

See ”Make a call” on page 8.

You have one or more voice messages.

See ”Voice messages” on page 24.

Your phone keypad is locked. See ”Keyguard” on page 9.

Your phone is set to the silent profile. See ”Profiles” on

page 33.

The alarm clock is on. See ”Alarm clock” on page 47.

The countdown timer is running. See ”Countdown timer”

on page 51.

The stopwatch timing is running in the background.

See ”Stopwatch” on page 52.

N o k i a 2 1 1 8 p h o n e a t

g l a n c e

Icon

Indicates...

Integrated handsfree is active.

The timed profile is selected. See ”Profiles” on page 33.

An enhancement is connected to the phone.

Voice privacy encryption is active (or is not active) in the

network.

Phone is roaming outside of your home network.

Phone is in a 1XRTT network. See ”Network Services” on

page viii.

below the menu item on the

phone screen.

■ Get the most out of this

guide

• Scroll keys are used to move up

and down in the menus.

The following sections illustrate the

various components of your phone.

Familiarise yourself with these

sections to help you understand the

instructions that follow.

• Call and end keys: Press the call

key to place a call or to answer an

incoming call. Press the end key

to end a call or press and hold to

return to standby mode.

This guide uses certain terms for the

steps that you are asked to perform:

• Press means to press and release

a key quickly. For example, press

7 means press the key on the

■ Phone menus

Phone features are grouped

keypad that is labelled with the

number 7 and the letters pqrs.

according to function and are

accessed through the main menus.

Each main menu contains submenus

and lists from which you can select

or view items and personalise your

phone features. You can access

these menus and submenus by using

the scroll method.

• Press and hold means to press

and hold a key for 2–3 seconds,

then release the key.

• Selection keys are used to select

a menu option. To select an

option, press the selection key

N o k i a 2 1 1 8 p h o n e a t

g l a n c e

Scroll method

In-phone help

1. In the standby mode, select

Many features have brief

Menu, and scroll through the

main menu with the scroll up and

down key.

descriptions (help text) that can be

viewed on the display. To view these

descriptions, scroll to a feature, and

wait for about 15 seconds. If needed,

select More to view all of the

2. When you arrive at a menu, use

Select (the left selection key) to

enter submenus.

description, or Back to exit.

In order to view the descriptions, you

must activate help text.

Select Exit from the main menu

level or press the end key to

return to standby mode from any

menu or submenu.

1. In the standby mode, select

Menu > Settings > Phone

settings > Help text activation.

Select Back from the submenu

level to return to the previous

menu.

2. Highlight and select On to display

help text or Off to turn this

feature off.

Shortcuts

You can go directly to almost any

menu or submenu, as well as

activate most features by using a

shortcut.

In the standby mode, select Menu;

then within 3 seconds press the key

or keys associated with the menu

function you would like to view or

activate.

For example, to select the Meeting

profile, select Menu 3-3-1 in

standby mode (Menu > 3 Profiles > 3

Meeting > 1 Activate). After a brief

pause, the Meeting profile is

activated.

S e t u p y o u r p h o n e

2. Set up your phone

Remove the back cover

■ Antenna

Your device has an internal antenna

located towards the top of the

phone. Hold the phone as you would

any other telephone with the

antenna area pointed up and over

your shoulder.

1. With the back of the phone

facing you, push down on the

button on the back of the phone.

Note:Aswith

any other

radio

transmitting

2. Slide the back cover toward the

bottom of the phone and remove.

device, donot

touch the

antenna

Remove the battery

unnecessarily when the

device is switched on.

Contact with the antenna

affects call quality and may

cause the phone to operate

at a higher power level than

otherwise needed. Avoid

contact with the antenna

area when operating the

phone to optimize antenna

performance and battery life.

After you have removed the back

cover, insert your finger into the

finger grip and lift the battery from

its compartment.

Replace the battery

1. Position the battery so the gold-

coloured contacts match up with

those on the phone.

The battery label should face

away from the phone.

2. Insert the battery, gold-coloured

contact end first, into the battery

slot.

■ Battery

Always switch the device off and

disconnect the charger before

removing the battery.

S e t u p y o u r p h o n e

3. Push down on the other end of

the battery to snap the battery

into place.

■ Turn your

phone on

or off

To turn your

phone on or off,

press and hold

thepowerkeyon

top of the phone

for at least 3 seconds.

Replace the back cover

■ Connect the headset

Slide the back cover toward the top

of the phone until you hear a click

and see the back cover release

button lock into place.

A compatible headset may be

purchased with your phone or

separately as an enhancement. (See

”Enhancements” on page 58.)

1. Plug the

headset

Charge the battery

1. Plug the charger transformer into

connector

into the

Pop-Port™

connector at

the bottom

end of your phone.

a standard ac outlet.

2. Insertthe

charger

output

plug into

theround

jack at

2. Position the headset on your ear.

With the headset connected, you

can make, answer, and end calls

as usual.

the bottom end of the phone.

After a few seconds, the battery

indicator in the display starts to

scroll from bottom to top. If the

battery is completely discharged,

it may take a few minutes before

the charging indicator appears

on the display or any calls can be

made.

• Use the keypad to enter

numbers.

• Press the call key to place a

call.

• Press the end key to end a call.

S e t u p y o u r p h o n e

Install the key mat and front

cover

1. Remove the key mat from the old

front cover and place it into the

new front cover as shown.

■ Change the Xpress-on™

covers

Note: Before removing the

cover, always switch off the

power and disconnect the

charger and any other device.

Avoid touching electronic

components while changing

the covers. Always store and

use the device with the covers

attached.

2. Press the front cover and key mat

against the phone, and snap the

front cover into place.

Remove the back cover

See ”Remove the back cover” on

page 5 for instructions on removing

the back cover.

Remove the front cover

Replace back cover

See ”Replace the back cover” on

page 6.

Insert a photo in the back

cover

You can insert

Gently pull the bottom of the front

cover away from the rest of the

phone and remove.

one of your

favourite

photos in the

back cover to

personalise

your phone. The size of the photo

S e t u p y o u r p h o n e

should not be larger than 45 mm x

25 mm. Trim the sides and corners at

the bottom of the photo. Please

note, if the photo is smaller than the

window size, it may not stay in its

position. The photo should be

inserted with its image side facing

the transparent window of the

cover.

Use the contacts list

1. In the standby mode, scroll down

to display the contents of your

contacts list.

2. Press the call key to make the

call, or select Details to view

details of the entry.

Use the last dialled number

1. In the standby mode, press the

call key to display the last 20

numbers dialled.

■ Make a call

Use the keypad

2. Scroll to the number (or name)

you wish to redial, and press the

call key.

1. Enter the phone number

(including the area code), and

press the call key. (To delete a

character to the left of the

cursor, select Clear.)

A conference call

Conference calling is a network

service that allows you to take part

in a conference call with two other

participants.

2. Press the end key to end the call,

or select End call to cancel the

call attempt.

1. Make a call to the first

participant.

Use the save contact option

1. In the standby mode, enter the

phone number (including the

area code) and select Options >

Save, enter a name for the the

contact, and select OK.

2. With the first participant on the

line, select Options > New call.

3. Enter the phone number of the

second participant, or select

Search to retrieve a number from

the contacts list.

2. Press the call key to make the

call, or select Done to return to

standby mode.

4. Select Flash. The first participant

is put on hold.

S e t u p y o u r p h o n e

5. When the second participant

picks up, press the 3 and then the

call key to connect the calls.

Warning: Do not hold the

device near your ear when

the loudspeaker is in use

because the volume may be

extremely loud.

6. To end the conference call, select

Options > End all calls, or press

the end key.

• To activate the loudspeaker while

in a call, select Loudsp..

■ Answer calls

• To deactivate the loudspeaker

during a call, select Handset.

Answer a call with the

keypad locked

The loudspeaker is deactivated

automatically when a call (or a call

attempt) ends or when certain

enhancements are connected.

To answer a call with the keypad

locked, press the call key. During the

call, all features function as normal.

When you end or reject the call, the

keypad automatically relocks. See

”Keyguard” on page 9.

Options during a call

Many of the options that you can

use during a call are network

services. Check with your wireless

service provider for more

information.

When the phone is locked, calls still

may be possible to the official

emergency number.

1. Select Options during a call to

display a list of options available

during a call.

Adjust the volume during

a call

To increase or decrease the volume

2. Select an option.

during a call, scroll up or down

during the call. When adjusting the

volume, a bar chart appears in the

display indicating the volume level.

■ Keyguard

With keyguard, you can lock the

keypad to prevent keys from being

pressed accidentally. Remember to

lock your phone keypad to prevent

accidental calls. If the keypad is

locked, it unlocks when you receive a

call. After the call, the lock

Loudspeaker

You can use your phone as a

loudspeaker during a call. Do not

hold the phone to your ear during

the loudspeaker operation.

automatically reactivates.

S e t u p y o u r p h o n e

When the keyguard is on, calls still

may be possible to the official

emergency number.

To unlock the keypad, select Unlock

and press * within 2 seconds.

To lock the keypad, select Menu and

press * within 2 seconds.

■ Use the

flashlight

Your phone has

a built-in

flashlight that

you can activate

when the phone is in the standby

mode or when there is a call in

progress. To activate the flashlight,

press and hold the scroll up key. The

light stays on until you release the

scroll up key.

You can also use the flashlight to

alert you to an incoming call. For

more information, see ”Personalise a

profile” on page 33.

T e x t e n t r y

3. Text entry

You can use two methods for

entering text and numbers:

To enter a single number in Abc mode,

press and hold the specific number

key until the number appears.

• Standard mode is the only way to

enter text into the contacts list,

and to rename caller groups.

Punctuation and special

characters

• Predictive input is a quick and

easy method for writing messages

and creating a calendar note.

While at any text entry screen, press

* to display special characters (press

and hold * if predictive text is on).

Scroll to navigate through the list of

special characters. Once a character

is highlighted, select Insert to insert

the character into your message.

■ Standard mode

Text (Abc)

• Press a key once to insert the first

letter on the key, twice for the

second letter, etc. If you pause

briefly, the last letter in the

Delete text

To delete text, you can use either

option.

display is accepted and your

phone awaits the next entry.

• Select Clear to backspace the

cursor and delete a character.

• Press 0 to enter a space thereby

accepting a completed word.

• Select and hold Clear to

backspace continuously and

delete characters.

• Press 1 to enter a period (.).

• Press * to display special characters.

See more about special

■ Predictive text input

characters on the following pages.

Predictive text input allows you to

write messages quickly using your

keypad and the built-in dictionary. It

is much faster than the standard

mode method, because for each letter,

you only press the corresponding key

on your keypad once.

Numbers (123)

To switch to 123 mode from Abc mode,

press and hold # at any message entry

screen until the icon in the upper left

corner of the display switches from

Abc to 123 (or vice versa).

T e x t e n t r y

• Press and hold the specific

number key to enter a number.

Activate and deactivate

1. At any text entry screen, select

• Press # to switch predictive text

on or off and to use predictive

text in various modes. As you

press #, the following icons (not

the descriptions) appear in the

upper left of the display screen:

Options > Dictionary.

2. Select the language of your choice.

The language setting affects the

time and date formats of the clock,

alarm clock, and calendar.

Uppercase text: standard

mode is on.

Enter text

The illustration below simulates your

display each time a key is pressed.

For example, to write Nokia with

predictive text on and with the

English dictionary selected, press

each of the following keys once:

Lowercase text: standard

mode is on

Sentence case text:

standard mode is on.

Sentence case text:

predictive text is on.

Lowercase text:

predictive text is on.

• Press 0 to enter a space and begin

writing the next word.

Delete text

To delete text, you can use either

option.

• If a displayed word is not correct,

press * to see other matches. To

return to the previous word in the

list of matches, select Previous.

• Select Clear to backspace the

cursor and delete a character.

• If ? appears after a word, select

Spell to add the word to the

dictionary.

• Select and hold Clear to

backspace continuously and

delete characters.

• Press 1 to insert a period into

your message.

• Press and hold * to display special

characters. Press * again to cycle

through all available characters.

C o n t a c t s l i s t

4. Contacts list

The contacts list can hold up to 250

contacts with multiple numbers and

text notes for each contact. The

amount of numbers and text entries

that you can save may vary, depending

on length and the total number of

entries in the contacts list.

2. Select and hold Options.

Save an entry

1. In the standby mode, select

Contacts > Add new.

2. Enter the name, and select OK.

3. Enter the phone number, and

select OK > Done.

■ Search

1. In the standby mode, select

Save voice mail dialling code

Contacts > Search.

You can insert special characters

called dialling codes into phone

numbers such as voice mail, and

save the number to a speed dial

location. Dialling codes instruct the

receiving system to pause, wait,

bypass, or accept the numbers that

follow them in the dialling string.

2. Enter the first character of the

contact name and highlight the

contact you wish to view.

3. Select Details > Options and the

action you want to apply to the

contact.

■ Add new contacts

Voice mail services vary by service

provider. The following instructions

are examples of common operations.

Please check with your service

Save a name and number

1. In the standby mode, enter the

phone number you wish to save.

provider for specific instructions for

using your voice mail service.

2. Select Options > Save.

3. Enter the name, and select OK >

Write down number and

process

Done.

1. Write down your voice mailbox

number.

Save a number (only)

2. Call and check your voice mail as

you normally would.

1. In the standby mode, enter the

phone number you wish to save.

C o n t a c t s l i s t

3. Write down your interaction with

the recorded prompts step-by-

step. Note that each voice mail

service may vary. Your steps may

resemble the following:

Set up voice mail with dialling

codes

1. In the standby mode, select

Contacts > Speed dials.

2. Scroll to an empty speed dialling

Dial 083210, pause 5 seconds,

press 1, pause 2 seconds, press

1234, and press *.

slot, and select Assign.

3. Enter your voice mailbox number,

including the area code.

Be precise; you will need this

information in ”Set up voice mail

with dialling codes” on page 14.

4. Refer to dialling codes, and enter

any codes as necessary using the

information that you saved from

”Write down number and

Insert dialling codes

process” on page 13.

Press * repeatedly to cycle through

dialling codes. When the desired

code appears in the display, pause

briefly and the code is inserted into

the dialling string.

For example, if you pause for 5

seconds after connecting to voice

mail, enter p twice after the voice

mailbox number, for example,

083210pp.

The following dialling codes are

available:

5. Enter any remaining pauses or

other information that allows

you to listen to your messages,

and select OK.

Dialling

Indicates...

code

Bypasses a set of

instructions.

6. Enter a name (such as voice mail),

and select OK.

Causes the international

access code to be

replaced by +.

To dial and listen to your voice mail,

press and hold the assigned speed

dialling key in the standby mode.

Pauses for 2.5 seconds

before sending any

numbers that follow.

Save addresses and notes

To save an address or note, add it to

an existing entry (contact).

Waits for you to press

the call key before

sending the numbers or

codes that follow.

1. In the standby mode, scroll down

to display a list of entries in your

contacts list.

C o n t a c t s l i s t

2. Scroll to a name to which you

want to add information.

1. In the standby mode, scroll down

to the entry you wish to change,

and select Details.

3. Select Details > Options > Add

detail > E-mail, Web address,

Postal addr., or Note.

2. Scroll to the number you wish to

set as default, select Options >

Set as default.

4. Enter the text for the note or

address, and select OK.

Set up voice tags

For more information on setting up

voice tags and other voice features,

see ”Voice tags” on page 45.

Save multiple numbers

You can save different types of

phone numbers and short text items

per name to the contacts list. The

first number you save for any entry is

automatically set as the default, but

the default number can always be

changed.

Set up caller groups

You can add contacts list entries to

any of five caller groups, and assign

a unique ringing tone or graphic to

that group. This enables you to

identify callers from the group by

their unique ringing tone or graphic.

1. In the standby mode, scroll down

to display a list of entries.

Highlight the entry you wish to

add a phone number or text item.

Set up a group

2. Select Details > Options > Add

1. In the standby mode, scroll down

to display a list of entries in your

contacts list.

number or Add detail.

3. Select General, Mobile, Home,

Office, Fax, or E-mail, Web

2. Scroll to a name you want to add

to a caller group.

address, Postal addr., or Note.

4. Enter the number or text for the

type you have selected, and

select OK.

3. Select Details > Options > Caller

groups.

4. Select the caller group to which

you would like to add the name.

5. To change the type, select

Change type in the options list.

Choose an option

To change the default number for

the contact entry.

1. In the standby mode, select

Contacts > Caller groups > Family,

VIP, Friends, Business, or Other.

C o n t a c t s l i s t

2. Scroll to highlight a group, and

select one of the following caller

group options:

Change speed dialling numbers

1. In the standby mode, select

Contacts > Speed dials.

Group name — Rename the group

to your preference.

2. Scroll to the Speed dials entry

you wish to change and select

Options > Change.

Group ringing tone — Set the

ringing tone for the group.

3. Enter the new number; or select

Search to retrieve a number from

the contacts list, and select OK.

Group logo — Turn the graphic for

the caller group on or off.

4. Enter a name for the entry, and

Group members — Add or remove

members from the caller group.

select OK.

Delete speed dialling numbers

1. In the standby mode, select

Contacts > Speed dials.

Set up speed dialling

You can associate any entry in the

contacts list with a key from 2–9; to

dial those entries, press and hold the

assigned key.

2. Scroll to the Speed dials location

you wish to delete.

3. Select Options > Delete > OK to

delete the key assignment.

Assign a key to speed dialling

1. In the standby mode, select

Contacts > Speed dials.

■ Edit contacts list entries

1. In the standby mode, scroll down

to display the contents of your

contacts list.

2. Scroll to any empty slot, and

select Assign.

3. Enter the number (including the

area code), and select OK; or

select Search to retrieve a

2. Scroll to the entry you would like

to edit, and select Details.

number from the contacts list.

4. Enter the contact name for the

Edit phone number

1. Highlight the phone number you

would like to edit and select

Options.

number, and select OK.

If Speed dials is off, the phone

displays a prompt asking if you

want to turn Speed dials on.

2. Select one of the following

5. Select Yes to activate Speed dials.

options, then OK.

C o n t a c t s l i s t

Add voice tag — Add a voice tag

Edit name — Edit the name of the

to the contact.

contact.

Edit number — Edit an existing

View name — View the name of

phone number of the contact.

the contact.

Delete number — Delete a phone

number from the contact.

Delete — Delete the entire

contact entry from your contacts

list.

Use number — Display the phone

number on the standby mode

screen, ready to be called.

E-mail address entry

1. Highlight the e-mail address

entry you want to update and

select Options.

View — View the details of the

contact.

Change type >General, Mobile,

Home, Office, or Fax — Change

the number type.

2. Select one of the following

options, then OK.

Send e-mail — Send an e-mail.

Set as default — Change the

default number of the contact.

Edit detail — Edit existing details

of e-mail.

Add number — Add a number to

the contact.

Delete detail — Delete

existing e-mail.

Add detail > E-mail, Web address,

Postal addr., or Note — Add to the

contact.

View — View the details of the

e-mail contact.

Caller groups — Add the contact

to an existing caller group.

Change type >General, Mobile,

Home, Office, or Fax — Change

the number type.

Custom tone — Add a custom ring

tone to the contact.

Add detail > E-mail, Web address,

Postal addr., or Note — Add to the

contact.

Send bus. card — Send the

contact as a business card to

another phone.

Add number — Add a number to

the entry.

Send message — Create and send

a message to the contact.

Caller groups — Add the e-mail to

an existing caller group.

Speed dial — Add the contact to

your speed dial list.

Custom tone — Add a custom ring

tone to the contact.

C o n t a c t s l i s t

Send bus. card — Send the

contact a business card.

■ Add number list entries

Add number allows you to tag each

phone number entry with a phone

type.

Edit name — Edit the name of the

contact.

View name — View the name of

the contact.

1. In the standby mode, select

Contacts > Add number.

Delete — Delete the entire e-mail

entry from your contacts list.

2. Highlight a contact from the list,

and select Add.

3. Select the tag as General, Mobile,

Home, Office, or Fax, and enter

the number.

Edit web address

1. Highlight the web address entry

you want to edit and select

Options.

■ Settings

2. Select the option you wish to

Settings allows you to determine

how your phone numbers are viewed

and how much memory remains in

the contacts list.

perform, then OK.

■ Delete contacts list

entries

1. In the standby mode, select

Contacts > Settings.

1. In the standby mode, select

Contacts > Delete.

2. Select Scrolling view to select

how names and numbers are

viewed in Contacts list.

2. To delete individual entries, scroll

to One by one.

3. Select Memory status to

determine the amount of space

available in Contacts list.

3. Scroll to the entry you wish to

delete, and select Delete > OK to

confirm.

4. To delete the entire contents of

your contacts list, select Delete

all > OK.

■ Voice tags

Voice tags allows you to playback,

change or delete voice tags.

5. Enter the security code, and

select OK. See ”Security settings”

on page 39 for more information.

In the standby mode, select

Contacts > Voice tags, scroll to a

voice tag, and select Options >

Playback, Change, or Delete.

C o n t a c t s l i s t

Highlight an entry from the

■ My number

In the standby mode, select

Contacts > My number to display

your phone’s number.

contacts list that you wish to

send, select Details > Options >

Send bus. card.

To send the business card as a

message, select Via text msg..

■ Caller groups

Caller groups allows you to organise

your contact information into

groups.

2. Select Default number or All

details (only if contact has more

than one phone number).

3. Enter the number for your

recipient or select Search to

retrieve a number from your

contacts list.

1. In the standby mode, select

Contacts > Caller groups >

Family, VIP, Friends, Business, or

Other.

4. Select OK. The business card is

2. Select Group name, Group

ringing tone, Group logo, or

Group members, and follow the

directions.

sent.

■ Send and receive

contacts (business

cards)

You can send and receive an entry in

your contacts list with a text

message if supported by your

wireless provider.

Send a business card

You can send a business card as a

text message to a compatible phone

or other handheld device.

1. In the standby mode, scroll down

to display the contents of your

contacts list.

M e s s a g e s

5. Messages

If you have subscribed to a messaging

service through your wireless

select the message recipients. Select

List recipients to see current list of

recipients. Select Send to send the

message.

provider, you can send and receive

messages to compatible phones that

also subscribe to a compatible

message service. You may also be

able to send and receive picture

messages, and e-mail messages.

Create message > Numeric page —

Allows you to send numeric pages.

Callback no. allows you to edit your

callback number. Add number and

Add list allows you to select the

message recipients. Select List

recipients to see current list of

recipients. Select Send to send the

message.

Note: When sending

messages, your device may

display Message sent. This is

an indication that the

message has been sent by

your device to the network.

This is not an indication that

the message has been

received at the intended

destination. For more details,

about messaging services,

check with your service

provider.

Inbox — Allows you to check for

received messages.

Sent items — Allows you to check for

sent messages.

Archive — Allows you to save

messages in an archive.

Templates — Inlcudes a selection of

templates for creating messages.

■ Text messages

In the standby mode, select Menu >

Messages > Text messages and from

the following:

My folders — Allows you to create

and name your personal folders.

Distribution lists — Allows you to

create and edit your personal

mailing list for contacts.

Create message > Text — Allows you

to create and send messages. Edit

message allows you to create or edit

your message. Add number, Add

e-mail, and Add list allows you to

Delete messages — Allows you to

delete messages from a selected

folder or all folders.

M e s s a g e s

Message settings — Includes options

for changing settings for reading,

writing and sending messages.

3. Enter the template into your new

message.

4. Complete the message using the

keypad.

Write and send

1. In the standby mode, select

5. Select Options > Send.

6. If you do not have any recipients

you must add them with the Add

number option.

Menu > Messages > Text

messages > Create message >

Text > Add number or Add e-mail.

2. Enter the recipient’s phone

number; or e-mail address, or

select Search to retrieve a

number from your contacts list,

and select OK.

Create a distribution list

1. In the standby mode, select

Menu > Messages > Text

messages > Distribution lists >

Options > Add list.

3. Repeat steps 1 and 2 to add more

2. Enter a name for the list, and

recipients, and select OK.

select OK.

4. Select Options > Edit message.

3. To add a contact to this list,

select Options > Add contact, and

add the contacts one by one.

5. Compose a message using the

keypad, and select Options >

Send.

Send a message to a

distribution list

1. In the standby mode, select

Menu > Messages > Text

messages > Create message >

Text > Add list.

Templates

Templates are short, prewritten

messages which can be recalled and

inserted into new text messages

when you are short on time.

1. In the standby mode, select

Menu > Messages > Text

messages > Create message >

Text > Edit message >Options >

Use template.

2. Scroll to a distribution list and

select OK > Options > Send.

Your message is then sent to each of

the recipients in the list.

2. Highlight and select one of the

available templates.

M e s s a g e s

List recipients — Send the message

to more than one recipient.

Read and reply

When you receive a message, a

Settings — Set the priority of the

notification message displays and

message.

the unopened letter icon (

appears in the display.

)

Save — Select Sent items to

save the message in the sent items

folder; select Templates to save the

message as one of your predefined

templates; select Archive to save the

message in your archive.

1. Select Show to read the message

or Exit to dismiss the notification

message.

Use the scroll keys to view the

whole message, if necessary.

Clear text — Erases all text from your

message.

When unopened messages are in

your inbox,

is shown in the

Exit editor — Save the message to

your sent items folder automatically,

and leave the message editor.

upper left corner during standby

mode as a reminder.

2. Select Options > Reply > Empty

Insert contact — Insert a name from

your contacts list into your message.

screen.

3. Compose your reply using the

Insert number — Insert a phone

number or find a phone number in

the contacts list.

keypad, and select Options > Send.

Choose a message option

Use template — Insert a predefined

template into your message.

Create message options

When you create or reply to a text

message, depending on the mode of

text input you are using and the

features supported by your wireless

service provider, some or all of the

following options are available:

Insert picture — Insert a picture into

your message.

Change picture — Takes you back to

the picture list. Scroll to highlight a

new picture, select View > Insert to

replace the previous picture in your

message.

Preview — If a message contains a

picture, previews the inserted

picture before sending. Select Back

to return to the list of options.

Delete picture — Select OK to delete

the picture from your message, or

select Back to return to the list of

options.

Send — Send the message to one

recipient.

M e s s a g e s

Insert smiley — Insert the smiley face

of your choice into your message.

Change sending options

In the standby mode, select Menu >

Messages > Text messages >

Message settings > Send options and

the setting you wish to change:

Insert word or Edit word — Enter or

edit the text of a new word that

might not appear in the predictive

text dictionary. This displays only

when the Dictionary option is on.

Priority — Select the priority of the

note as Normal or Urgent.

Insert symbol — Insert a special

character into your message. This

displays only when the Dictionary

option is on.

Delivery reports — A note is sent to

you confirming delivery of the

message. Select On or Off.

Send callback number — A callback

number is sent to the recipient.

Select Off or the default phone

number for On.

Dictionary — Select a predictive text

language or select Dictionary off to

turn this option off.

Matches — View matches found in

the dictionary for the word you want

to use.

Change other settings

In the standby mode, select Menu >

Messages > Text messages >

Message settings > Other settings

and the setting you wish to change:

Read message options

When you read a text message, the

following options are available:

Message font size — Select Small

font or Large font.

Delete — Discard the message.

Reply — Reply to the message.

Create the message and select

Options > Send. The sender’s phone

number or e-mail is used as the

default.

Message overwriting — Select Sent

items only, Inbox only, S. items &

inbox, or Off.

When the message memory is full,

your phone cannot send or receive

any new messages. However, you

can set your phone to automatically

replace old messages in the Inbox

and Sent items folders when new

ones arrive.

Use number — Select Save, Add to

contact, Send message, or Call.

Save — Save the message to a folder.

Forward — Forward the message to

another phone number.

Rename — Edit the title of the

message.

M e s s a g e s

Save to Sent items as sending —

Select Always save, Always prompt,

or Off.

Call and set up your voice

mail

1. When you save the voice mailbox

number, press and hold 1.

■ Voice messages

2. When you connect to voice mail

and the prerecorded greeting

begins, follow the automated

instructions to set up your voice

mail.

If you subscribe to voice mail, your

wireless provider will furnish you

with a voice mailbox number. You

need to save this number to your

phone to use voice mail. When you

receive a voice message, your phone

lets you know by beeping, displaying

a message, or both. If you receive

more than one message, your phone

shows the number of messages

received.

Listen to your voice

messages

Once you have set up voice mail, you

can dial the number in one of four

ways:

• Dial the number using the

keypad.

Save voice mailbox number

• Press and hold 1.

Your wireless provider may have

already saved your voice mailbox

number to your phone. If so, the

number will appear in the display in

step 2. Select OK to leave the

number unchanged.

• Select Listen if there is a

notification message in the

display.

• In the standby mode, select

Menu > Messages > Voice

messages > Listen to voice

messages.

1. In the standby mode, select

Menu > Messages > Voice

messages > Voice mailbox

number.

When you connect and the

prerecorded greeting begins, follow

the automated instructions to listen

to your voice messages.

2. If the number is not displayed or

incorrect, enter your voice

mailbox area code and number.

3. Select OK.

M e s s a g e s

Automate voice mail

Write and send

You can can automate voice mail

with dialling codes. For more

information, see ”Save voice mail

dialling code” on page 13.

When a picture is added to a text

message, the message converts to

picture message. The message

counter in the upper right of your

display shows the characters

available for you to type in.

■ Picture messages

1. In the standby mode, select

Menu > Messages > Text

messages > Create message >

Text > Edit message.

Picture messaging is a network

service. If your wireless service

provider supports this feature, your

phone comes with five preloaded

pictures. Pictures can be attached to

a message and sent using text

messaging to compatible phones or

PCs. Picture messages behave the

same as text messages, but pictures

take up more space than text.

Pictures are stored in the Templates

folder at Menu > Messages > Text

messages > Templates.

2. Write a message using the

keypad (or enter nothing if you

choose to just send a picture),

and select Options.

3. Select Insert picture.

4. Scroll down through the pictures,

and select View.

5. Select Insert to insert the picture

into your message; otherwise

select Back, scroll to another

picture, and select View again.

Note: Picture message

function can be used only if it

is supported by your network

operator or service provider.

Only compatible devices that

offer picture message

6. To send the picture message,

select Options > Send.

7. Select Add number.

features can receive and

display picture messages.

8. Enter the phone number for your

recipient, or select Search to

retrieve a number from the

some images, music (including

ringing tones) and other content

from being copied, modified,

transferred, or forwarded.

contacts list, and select OK.

9. Select Options > Send.

Picture images are not saved in Sent

items and can only be received Via

text msg..

M e s s a g e s

If your wireless service provider

supports this feature, you can check

for e-mail messages using the

minibrowser. In the standby mode,

select Menu > Messages >

View a picture message

When you receive a picture message,

the message icon (

the display.

) appears in

1. Select Show to view the picture

message or select Exit to dismiss

the notification message.

Minibrowser messages > Connect.

See ”Minibrowser” on page 55 for

more information on using the

Minibrowser in your phone to access

web pages.

2. If you have more than one picture

message, select the message of

your choice.

When you have unopened picture

■ Message folders

messages in your inbox,

shown in the upper left corner

during standby mode as a reminder.

Save messages to folders

You can save drafts of messages or

received messages to an existing

folder or to a folder that you have

created.

3. Scroll to view the whole picture if

necessary.

4. Once you are finished, select

Back to view the notification in

the Inbox or Options for other

choices such as Reply or Forward.

1. Open the received message or

create a new message, and select

Options.

If you would like to save the picture

to your Templates folder for later

use, select Options > Save picture.

You can enter a title for the picture,

and select OK.

2. Select Save > Sent items,

Templates, Archive, or a folder

you have created on your own.

Save the message to another

folder

While viewing a message, select

Options > Save and the destination

folder.

If your templates folder is full of

pictures, select the picture you

would like to replace.

■ Minibrowser messages

Minibrowser messaging is a network

service. See ”Network Services” on

page viii for more information.

M e s s a g e s

View saved messages

Archive folder

1. In the standby mode, select Menu >

Store messages that have been read

Messages > Text messages.

in the Archive folder.

2. Select and open the folder

containing the message you wish

to view.

Templates folder

Pictures and prewritten templates

are stored in the Templates folder.

Preloaded templates can be edited

and personalised.

3. Select the message you wish to

view.

Inbox folder

My folders

Keep your messages organised by

creating custom folders and saving

some of your messages there.

Messages are automatically stored

in the inbox after they have been

read or if you select Back when a

notification appears in standby mode.

Add a folder

Sent items folder

1. In the standby mode, select Menu >

Messages > Text messages > My

folders > Options > Add folder.

Messages that you have sent and

messages that you have created but

have not sent are automatically

stored in the sent items folder.

2. Enter a name for the new folder,

and select OK.

When sending messages, set Save to

Sent items as sending to Always save

or Always prompt to ensure that

your messages are saved. If Save to

Sent items as sending is set to Off,

sent messages are not stored in the

sent items folder.

Rename a folder

1. In the standby mode, select

Menu > Messages > Text

messages > My folders.

2. Any folders that you have created

appear in the display. Scroll to the

folder you wish to rename, and

select Options > Rename folder.

To change the settings, select Menu >

Messages > Text messages >

Message settings > Other settings.

3. Select and hold Clear to delete

the existing entry, then enter the

new name for the folder, and

select OK to confirm or Back to

exit.

M e s s a g e s

3. Select the message you wish to

delete, and select Options >

Delete.

Delete a folder

Only folders created in My folders

can be deleted. The Inbox, Sent

items, Archive, and Templates

folders are protected. When you

delete a folder, all messages in the

folder are also deleted.

4. Select OK to delete the message

or Back to exit.

Delete all messages in a folder

1. In the standby mode, select

Menu > Messages > Text

messages > My folders.

Menu > Messages > Text

messages > Delete messages.

2. Scroll to the folder you wish to

remove, and select Options >

Delete folder.

2. Select the folder containing the

messages you wish to delete and

one of the following:

3. Select OK to delete or Back to exit.

All — Deletes all messages in all

of the folders.

■ Delete messages

If your message memory is full and

you have more messages waiting at

All read — Deletes any messages

which have been read in all of the

folders.

the network,

standby mode. You can do the

following:

blinks during in

All unread — Deletes any

messages which have not been

read in all of the folders.

• Read some of the unread

messages, and delete them.

Inbox — Deletes all messages

from the Inbox folder.

• Delete messages from some of

your folders.

Sent items — Deletes all messages

from the Sent items folder.

Archive — Deletes all messages

from the Archive folder.

Delete a single message

To delete a single message, you need

to open it first.

User defined folders — All user

defined folders that the user has

added under My folders are

displayed at the end of the

predefined folders.

1. In the standby mode, select Menu >

Messages > Text messages.

2. Select the folder containing the

message you wish to delete.

3. Select OK to delete the messages.

C a l l r e g i s t e r

6. Call register

Call register stores information

about the last 20 missed, 20

received, or 20 dialled calls. It also

adds the total duration of all calls.

When the number of calls exceed

the maximum, the most recent call

replaces the oldest.

■ View missed calls

The missed calls feature does not

function when your phone is

switched off. Missed calls are calls

that were never answered.

1. In the standby mode, select

Menu > Call register > Missed

calls.

Whether viewing missed, received,

or dialled calls, the menu options are

the same:

2. If a missed call notification

appears, select List.

Time of call — Display the date and

time of the call.

3. Scroll to a name or number, and

select Options.

Send message — Send a message to

the number.

4. Select an option.

View number — Display the number.

■ View received calls

Received calls are calls that have

been answered.

Use number — Edit the number and

associate a name with the number.

Save — Enter a name for the number

and save it to your contacts list.

1. In the standby mode, select

Menu > Call register > Received

calls.

Add to contact — Add the number to

an existing entry in your contacts

list, if the number is not associated

with a name.

2. Scroll to a name or number, and

select Options.

3. Select an option.

Delete — Clear the number from

memory.

■ View dialled numbers

Call — Call the number.

Dialled calls are previous numbers

you have dialled from your phone:

1. In the standby mode, press the

call key.

C a l l r e g i s t e r

■ Duration of calls

In the standby mode, select

Menu > Call register > Dialled

numbers.

Note: The actual time

invoiced for calls and services

by your service provider may

vary, depending on network

features, rounding off for

billing, taxes, and so forth.

2. Scroll to a name or number, and

select Options.

3. Select an option.

Last call

In the standby mode, select Menu >

Call register > Call duration >Last

call duration for more information.

■ Call times

You can make or receive up to five

calls to or from the same number

and view the time each call

occurred. Your clock must be set for

this feature to work accurately.

Show call time on display

In the standby mode, select Menu >

Call register > Call duration >Last

call duration > Details > Show call

time on display > On or Off.

1. While viewing a missed, received,

or dialled call, select Options >

Time of call.

2. Scroll down to view the most

recent call times from this

number; select Back to return to

the options list.

Dialled calls

In the standby mode, select Menu >

Call register > Call duration

>Duration of dialled calls > Details

for more information.

■ Delete call registers

You can delete any missed, dialled,

or received calls from phone

memory.

Received calls

In the standby mode, select Menu >

Call register > Call duration >

Duration of received calls > Details

for more information.

1. In the standby mode, select Menu >

Call register > Delete recent call

lists.

2. Select the type of calls you want

to clear: All, Missed, Received, or

Dialled.

C a l l r e g i s t e r

In the standby mode, select Menu >

Call register > Data/fax calls and one

of the following options:

All calls

In the standby mode, select Menu >

Call register > Call duration >

Duration of all calls for more

information.

Last sent data/fax — View the size

(KB) of the last sent data/fax call.

Last received data/fax — View the

size (KB) of the last received data/

fax call.

Life timer

In the standby mode, select Menu >

Call register > Call duration > Life

timer.

All sent data/fax — View the size

(KB) of all sent data and fax calls.

All received data/fax — View the size

(KB) of all received data and fax calls.

Clear timers

In the standby mode, select Menu >

Call register > Call duration > Clear

timers, enter your security code, and

select OK.

Duration of last data/fax call — View

the duration time of the last data or

fax call.

Duration of all data/fax calls — View

the duration time of all calls.

■ Duration of data/fax

Clear all data/fax registers — Select

OK > Yes to clear all data and fax logs.

calls

Data/fax calls are a network service.

See ”Network Services” on page viii

for more information. If your

wireless service provider supports

this feature, you can view the size or

duration of sent or received data and

fax calls.

■ Duration of minibrowser

Minibrowser is a network service

and a carrier-dependent feature. See

”Network Services” on page viii, for

more information. If your wireless

service provider supports this

feature, you can view the size or

duration of sent or received data

from the minibrowser.

Note: The actual time

invoiced for calls and services

by your service provider may

vary, depending on network

features, rounding off for

billing, taxes, and so forth.

C a l l r e g i s t e r

Note: The actual time

invoiced for calls and services

by your service provider may

vary, depending on network

features, rounding off for

billing, taxes, and so forth.

In the standby mode, select Menu >

Call register > Minibrowser calls and

one of the following options:

Last sent browser data — View the

size (KB) of the last send browser

data.

Last received browser data — View

the size (KB) of the last received

data.

All sent browser data — View the size

(KB) of all sent browser data.

All received browser data — View the

size (KB) of all received browser

data.

Last browser session — View the

duration time of the last browser

session.

All browser sessions — View the

duration time of all browser

sessions.

Clear all browser registers — Select

OK > Yes to clear all browser

registers.

P r o f i l e s

7. Profiles

Profiles define how your phone

reacts when you receive a call or

message, how your keypad sounds

when you press a key, and more.

Ringing options, keypad tones, and

other settings for each of the

available profiles can be left at their

default setting, or personalised to

suit your needs. The following

profiles are available: General,

Silent, Meeting, Outdoor, and Pager.

2. Select the option you want to

personalise: Incoming call alert,

Ringing tone, Ringing volume,

Vibrating alert, Light alert,

Message alert tone, Keypad

tones, Warning tones, Alert for, or

Profile name.

You cannot rename the General

profile.

■ Set a timed profile

Timed profiles can be used to

Profiles are also available for

enhancements such as a headset

and car kit. See ”Enhancement

settings” on page 39.

prevent missed calls. For example,

suppose you attend an event that

requires your phone be set to Silent

before the event starts, but you

forget to return it to General until

long after the event. A timed profile

can prevent missed calls by

■ Activate

In the standby mode, select Menu >

Profiles, the profile of your choice,

and Activate.

returning your phone to the default

profile at a time you specify.

■ Personalise a profile

You can personalise any of the

profiles a variety of ways.

1. In the standby mode, select

Menu > Profiles, the profile you

want activate and set for timed

expiration, and Timed.

1. In the standby mode, select

Menu > Profiles, the profile you

wish to personalise, and

Personalise.

2. Enter the time for the profile to

expire, and select OK.

Timed profiles can be set up to 24

hours in advance.

S e t t i n g s

8. Settings

Use this menu to set or change the

time and date settings, call settings,

phone settings, tone settings,

enhancement settings, security

settings, network settings and to

restore the factory settings.

Speed dialling

You can activate or deactivate Speed

dialling. In the standby mode, select

Menu > Settings > Call settings >

Speed dialling > On or Off.

Minibrowser confirmation

■ Call settings

You can specify whether or not you

want your phone to display

messages when you begin or end a

browser session.

Anykey answer

Anykey answer allows you to answer

an incoming call by briefly pressing

any key except the power, right

selection, or end key.

Select Menu > Settings > Call

settings > Minibrowser confirmation

and one of the following options:

In the standby mode, select Menu >

Settings > Call settings > Anykey

answer > On or Off.

None — No confirmation notes are

displayed.

On connection — Phone asks you to

confirm your awareness to possible

charges incurred for Internet access.

Automatic redial

Occasionally, your network may

experience heavy traffic, resulting in

a fast busy signal when you dial.

With automatic redial activated,

your phone redials the number, and

notifies you once the network is

available.

On exit — Phone asks you to confirm

your wish to end browsing.

Both — Confirmation required before

connecting to the Internet and before

you terminate a browser session.

Calling card

In the standby mode, select Menu >

Settings > Call settings > Automatic

redial >On or Off.

If you use a calling card for long

distance calls, you can save the calling

card numbers in your phone. Your

phone can store up to four calling cards.

S e t t i n g s

Contact your calling card company

for more information.

Save information

1. In the standby mode, select Menu >

Settings > Call settings > Calling

card.

Make calls

After you have saved your calling card

information in your phone, you can

make a call using your calling card.

2. Enter your security code, and

select OK.

3. Scroll to one of the four memory

locations, and select Options >

Edit > OK > Dialling sequence.

1. In the standby mode, select

Menu > Settings > Call settings >

Calling card.

4. Select one of the following

sequence types:

2. Enter your security code, and

select OK. (See ”Access codes” on

page 40.)

Access no. + phone no. + card no.

— Dial 0-800 access number,

phone number, then card number

and PIN, if required.

3. Scroll to the calling card of your

choice, and select Options > OK.

4. Press the end key to return to

standby mode; then enter the

phone number, including any

prefix (such as 0 or 1) that your

calling card may require when

you make a calling card call. See

your calling card for instructions.

Access no. + card no. + phone no.

— Dial 0-800 access number,

card number and PIN, if required,

then phone number.

Prefix + phone no. + card no. —

Dial the prefix (numbers that

must precede the phone number)

and phone number you want to

dial, then card number and PIN, if

required.

5. Press and hold the call key for a

few seconds until Card call is

displayed.

6. When you hear the tone or

5. Enter the required information

(access number or prefix and card

number), and select OK to

system message, select OK.

Data or fax calls

Data or fax calls is a network service.

See ”Network Services” on page viii

for more information.

confirm your entries.

6. Select Card name.

7. Enter the card name, and select

OK.

S e t t i n g s

If your wireless service provider

supports this feature, you can set up

the phone to send or receive data or

fax calls when a terminal, such as a

PDA or PC, is connected.

Data transfer

You can view the transmission speed

when sending or receiving data or

fax calls.

In the standby mode, select Menu >

Settings > Call settings > Data/fax

calls > Data rate display > Graphic or

Off.

For better performance during data

calls, place the phone on a

stationary surface. Do not move the

phone by holding it in your hand

during a data call.

Call summary

Your phone can display the time

spent on a call when you hang up.

For more information on

connectivity, refer to the PC/PDA

Connectivity Guide. The PC/PDA

Connectivity Guide can be

downloaded from the Nokia website

at www.nokia-asia.com/us.

In the standby mode, select Menu >

Settings > Call settings > Call

summary > On or Off.

1. In the standby mode, select

Menu > Settings > Call settings >

Data/fax calls > Incoming data/

fax call and one of the following

options:

■ Phone settings

Phone language

In the standby mode, select Menu >

Settings > Phone settings > Phone

language and the language of your

choice.

Normal — The phone receives

incoming calls as usual.

Data calls only — The phone

The language setting affects the

time and date formats of the clock,

alarm clock, and calendar.

receives only data calls.

Fax calls only — The phone

receives only fax calls.

2. Select Data calls only or Fax calls

Automatic keyguard

only.

You can set the keypad of your

phone to lock automatically after a

preset time delay.

3. When you are finished receiving

the fax or data call, repeat steps

1 and 2, and select Normal.

S e t t i n g s

1. In the standby mode, select Menu >

Settings > Phone settings >

Off — Used to turn off tones. No

tones are sent when you press a key.

Automatic keyguard > On or Off.

Set length

You can also specify DTMF tone

length when using the Fixed option.

2. If you select On, Set delay:

appears.

3. Enter the delay (in hh:mm

In the standby mode, select Menu >

Settings > Phone settings > DTMF

tones > DTMF tone length > Short

(0.1 seconds) or Long (0.5 seconds).

format), and select OK.

When keyguard is on, it may be

possible to dial the emergency

number.

Welcome note

DTMF tones

You can write a welcome note that

briefly appears whenever you switch

your phone on, if provided by your

service provider.

DTMF tones are the tones that sound

when you press the keys on your

phone keypad. You can use DTMF

tones for many automated dial-up

services such as banking and airlines

or for entering your voice mailbox

number and password.

Predictive text input is not available

for entering welcome note text.

1. In the standby mode, select

Menu > Settings > Phone

settings > Welcome note.

DTMF tones are sent during an active

call. You can send them manually

from your phone keypad, or send

them automatically by saving them

in your phone.

2. Enter a note (up to 44 characters).

Press * to display and select from

available special characters.

3. When you are finished, select

Set type

Options > Save.

In the standby mode, select Menu >

Settings > Phone settings > DTMF

tones > Manual DTMF tones and on

of the following options:

Select Delete if you want to delete

the previous text and begin creating

another welcome note.

Continuous — The tone sounds for as

long as you press and hold a key.

Banner

Banner is a network service. See

”Network Services” on page viii for

more information.

Fixed — Used to send tones of the

duration you specify in the DTMF

tone length option.

S e t t i n g s

If your wireless service provider

supports this feature, then you can

choose whether the display shows

the operator logo when the phone is

in the idle state.

■ Time and date settings

Time

Show or hide the clock

In the standby mode, select Menu >

Settings > Time and date settings >

Clock > Show clock or Hide clock.

In the standby mode, select Menu >

Settings > Phone settings > Banner >

Default or Personalise.

Set the time

Help text activation

Your phone displays brief

1. In the standby mode, select

Menu > Settings > Time and date

settings > Clock > Set the time.

descriptions for most menu items.

When you arrive at a feature or

menu, pause for about 10 seconds

and wait for the help text to display.

Scroll to page through the full help

text, if necessary.

2. Enter the time (in hh:mm

format), and select OK.

3. Select am or pm (this option

displays only when 12-hour

format is in use).

The default setting for help text is

on. However, you can turn help text

on or off.

Change the format

In the standby mode, select Menu >

Settings > Time and date settings >

Clock > Time format > 24-hour or

12-hour.

In the standby mode, select Menu >

Settings > Phone settings > Help

text activation > On or Off.

Date

Display brightness

Show or hide the date

You can change the brightness of

In the standby mode, select Menu >

Settings > Time and date settings >

Date > Show date or Hide date.

your phone display.

1. In the standby mode, select

Menu > Settings > Phone

settings > Display brightness.

Set the date

In the standby mode, select Menu >

Settings > Time and date settings >

Date > Set the date, enter the date,

and select OK.

2. Scroll up or down to adjust the

brightness level to your preference.

3. Select OK to accept your settings.

S e t t i n g s

enter the time manually (once the

battery is replaced or recharged, and

you are still outside of the digital

network).

Change the date format

1. In the standby mode, select

Menu > Settings > Time and date

settings > Date > Date format

and the format of your choice.

■ Tone settings

2. With Date on the display, select

Date separator, and the separator

of your choice.

From this menu, you can adjust the

ringing volume, keypad tones, and

other tone settings for the currently

active profile. See ”Personalise a

profile” on page 33.

Set the auto-update of date

and time

Auto-update is a network service.

See ”Network Services” on page viii.

■ Enhancement settings

The enhancement settings menu is

shown only if the phone is or has

been connected to a compatible

enhancement.

If your wireless service provider

supports this feature, you can allow

the digital network to set the clock,

which is useful when you are out of

your home area (for example, when

you have traveled to another

In the standby mode, select Menu >

Settings > Enhancement settings >

Headset, Handsfree, Text phone, or

Charger and the desired accessory.

network or time zone).

In the standby mode, select Menu >

Settings > Time and date settings >

Auto-update of date & time > On,

Confirm first, or Off.

■ Security settings

If you use the Auto-update of date &

time option while outside your digital

network, you may be prompted to

enter the time manually. Network

time will replace the time and date

when you re-enter your digital

network.

Restrict calls

Call restriction is a network service.

See ”Network Services” on page viii

for more information.

If your wireless service providers

supports this feature, then you can

restrict the calls your phone can

make and receive. When calls are

restricted, calls still may be possible

to the official emergency number.

If your battery has been removed or

has discharged outside the digital

network, you may be prompted to

S e t t i n g s

Contact your service provider for the

restriction password.

If you enter the wrong security code

five times in succession, you will not

be able to enter a code for five

minutes, even if you power off the

phone between incorrect entries.

1. In the standby mode, select Menu

> Settings > Security settings >

Call restrictions.

2. Enter the security code, and

Phone lock

select OK.

The phone lock feature protects your

phone from unauthorised outgoing

calls or unauthorised access to

information stored in the phone.

When phone lock is activated, Phone

locked is displayed each time you

turn your phone on.

3. Select the type of calls you wish

to restrict:

Restrict outgoing calls — Calls

cannot be made.

Restrict incoming calls — Calls

cannot be received.

When the phone is locked, calls still

may be possible to the official

emergency number.

4. Scroll to an option: Select, Add

restriction, Edit, or Delete.

Note: Edit and Delete options

are available only if a

restriction is added

previously.

1. In the standby mode, select

Menu > Settings > Security

settings > Access codes > Phone

lock.

2. Enter the lock code and select OK.

Access codes

3. Select one of the following

options:

The security and lock codes control

access to features and is supplied

with the phone. The preset security

code is 12345. Once you change the

security code, keep the new code

secret and in a safe place separate

from your phone.

On turns the phone lock feature

on immediately after the phone is

turned off and then on.

Off immediately turns off the

phone lock feature.

Call not allowed is displayed if you

attempt to place a call while the

phone is locked.

Avoid using codes similar to

emergency numbers such as 111 to

prevent accidental dialling of the

emergency number.

To answer a call with phone lock on,

select Answer or press the call key.

S e t t i n g s

emergency numbers to prevent

accidental emergency calls.

Allowed phone number when

phone locked

When phone lock is on, the only

outgoing calls that can be made are

to the emergency number (for

example, 111 or other official

emergency number) and the number

stored in the Allowed number when

lock active location.

The security code can be used for the

lock code.

Change the security code

The security code is needed for tasks

such as deleting all contacts or

restoring factory settings.

1. In the standby mode, select Menu

> Settings > Security settings >

Access codes > Change security

code.

1. In the standby mode, select Menu >

Settings > Security settings >

Access codes > Allowed number

when lock active.

2. Enter the current security code

2. Enter the lock code and select OK.

(default is 12345), and select OK.

3. Enter the phone number, or select

Search, recall the number from

the phone book, and select OK.

3. Enter the new security code (5

characters), and select OK.

4. Enter the new security code

Change the lock code

The lock code allows you to access

the phone when it is locked.

again, and select OK.

When you change your security

code, make sure you store it in a safe

place, away from your phone. Avoid

entering access codes similar to

emergency numbers to prevent

accidental emergency calls.

1. In the standby mode, select Menu >

Settings > Security settings >

Access codes > Change lock code.

2. Enter the current lock code

(default is 12345), and select OK.

3. Enter the new lock code (4

Voice privacy

characters), and select OK.

Voice privacy is a network service.

See ”Network Services” on page viii.

If your wireless service provider

supports this feature, the voice

privacy feature protects the privacy

of your current phone conversation

from other callers placing phone

calls on your same network.

4. Enter the new lock code again,

and select OK.

When you change your lock code,

make sure you store it in a safe

place, away from your phone. Avoid

entering access codes similar to

S e t t i n g s

In the standby mode, select Menu >

Settings > Security settings > Voice

privacy > On or Off.

3. Select Call divert.

4. Scroll to the type of forwarding

that matches the feature code

you entered (for example, Divert

if busy), select Activate.

■ Network

The Network menu allows you to

personalise the way your phone

chooses a network in which to operate

while you are within or outside of

your primary or home system.

The activated feature code is now

stored in your phone, and you are

returned to the Feature code:

prompt. Continue entering other

feature codes (for example, #81

to cancel Divert if busy), or press

the end key to return to standby

mode.

In the standby mode, select Menu >

Settings > Network > Home only or

Automatic.

When you enter a network feature

code successfully the feature

becomes visible in the Network

services menu.

Your phone is set to search for the

most cost-effective network. If your

phone does not find a preferred

network, it selects a network

automatically based on the option

you choose in the Network.

Call diverting

Call diverting tells your network to

redirect incoming calls to another

number. Call diverting is a network

service and may not work the same

in all networks, so contact your

wireless provider for availability.

■ Network services

features

The following features are network

services. See also ”Network Services”

on page viii.

Activate

This is a network service. All options

listed may not appear in the display.

Contact your wireless provider for

more information.

Store a feature code

1. In the standby mode, select Menu >

Settings > Network services >

Network feature setting.

1. In the standby mode, select Menu >

Settings > Network services >

Call divert and one of the

following options:

2. Enter the feature code from your

service provider (for example, *81

for activating Divert if busy), and

select OK.

S e t t i n g s

Divert all calls — Diverts all calls

to the number you specify.

Call waiting

If your wireless provider supports

this feature, call waiting notifies you

of an incoming call even while you

are in a call. You can then accept,

reject, or ignore the incoming call.

Divert if busy — Divert incoming

calls when you are in a call.

Divert if not answered — Divert

incoming calls to another

number if you are unable to

answer. You can set a delay

before diverting takes place.

1. During a call, select Answer or

press the call key to answer the

waiting call.

Divert if out of reach — Divert

incoming calls when your phone

is off.

The first call is put on hold.

2. Press the end key to end the

active call.

Cancel all diverts — Cancel any

call diverting options you have

set.

■ Restore factory settings

You can reset some of the menu

settings to their original values. Data

that you have entered or

downloaded is not deleted, for

example, entries in your contacts list

are not affected.

2. Select Activate.

3. Enter the number to which your

calls, data, or other information

are diverted, and select OK.

Cancel

1. In the standby mode, select

Menu > Settings > Restore

factory settings.

In the standby mode, select Menu >

Settings > Network services > Call

divert > Cancel all diverts.

2. Enter the security code (the

default security code is 12345),

and select OK.

Cancel all diverts may affect your

ability to receive voice mail

messages. Contact your wireless

provider for specific details.

V o i c e

9. Voice

2. Highlight the contact you want

to assign a voice tag, select

■ Voice dialling

You can dial up to 25 stored

numbers using voice dialling.

Details > Options > Add voice tag.

3. Select Start, then speak clearly

Before using voice tags, note the

following:

into the microphone.

Do not select Quit unless you want

to cancel the recording.

• Voice tags are not language

dependent. They are dependent

on the speaker’s voice.

The phone automatically stops

recording, saves, and replays the

• You must say the name exactly as

you said it when you recorded it.

voice tag.

appears next to the

phone numbers which have voice

tags assigned.

• Voice tags are sensitive to

background noise. Record voice

tags and use them in a quiet

environment.

If recording is not successful, your

phone displays Voice system error.

Select Options > Add voice tag, and

repeat step 3.

• Very short names are not accepted.

Use long names, and avoid similar

names for different numbers.

Dial a number

1. Select and hold Contacts.

Note: Using voice tags may

be difficult in a noisy

environment or during an

emergency, so you should not

rely solely upon voice dialling

in all circumstances.

2. When you hear several beeps and

Speak now appears, release the

key.

3. Pronounce the voice tag clearly

into the microphone.

Assign a voice tag to an entry

Before you can use voice dialling,

you must first assign a voice tag to

the number.

When the phone finds the voice

tag, Found: appears, and the

phone automatically dials the

number. If the phone does not

locate a number or recognise the

voice tag, No match found appears.

1. In the standby mode, scroll down

to enter the contacts list.

V o i c e

Voice tags

Add a voice tag

After you have associated a voice

tag to a contact, you can choose one

of the following options:

Before using voice commands, you

must first add a voice tag to the

phone function.

1. In the standby mode, select Menu >

Play back

1. Select Menu > Voice > Voice tags.

Voice > Voice commands.

2. Select the phone function you

wish to tag: Profiles, Voice

mailbox, Voice recorder or Call

2. Scroll to the name with the voice

tag you want to hear.

3. Select Options > Playback.

Modify

3. If necessary, scroll to an option

associated with that function,

and select Options > Add

command.

1. Select Menu > Voice > Voice tags.

2. Scroll to the name with the voice

tag you want to change.

4. Select Start, and speak the voice

3. Select Options > Change.

tag clearly into the microphone.

4. Select Start, then speak clearly

into the microphone. The phone

repeats your voice tag, and Voice

tag saved appears.

Do not select Quit unless you want

to cancel the recording.

The phone replays then saves the

recorded tag.

commands that have voice tags

assigned.

appears next to

Delete

1. Select Menu > Voice > Voice tags.

2. Scroll to the name with the voice

tag you want to erase.

Activate a voice command

3. Select Options > Delete. Delete

After you have associated a voice

tag with a phone function, you can

issue a command by speaking the

voice tag.

voice tag? appears.

4. Select OK to erase the voice tag.

■ Voice commands

You can set as many as five voice

commands, which allow hands-free

operation of certain phone features.

1. Select and hold Contacts.

2. When Speak now appears,

pronounce the voice tag clearly

into the microphone.

V o i c e

When the phone finds the voice tag,

Found: appears, and the phone plays

the recognised voice tag through the

earpiece. The function you requested

is activated.

3. When you are finished recording,

select Stop.

4. Enter a name for the recording,

and select OK. The recording is

saved to the Recordings list.

Voice tag options

After you have associated a voice

tag to a command, select one of the

following options:

Voice recorder options

After you have saved the recording

to the Recordings list, highlight the

recording, and choose one of the

following options:

Playback — Listen to the voice

command tag.

Playback — Listen to the recording

Change — Change the voice

using the earpiece.

command.

Delete — Erase the recording.

Delete — Erase the voice command

tag.

Edit title — Rename the recording.

Add alarm — Add an alarm to the

recording.

■ Voice recorder

This feature allows you to record

speech or sound with your phone

and listen to them later. The total

available time is 60 seconds if no

memos have been stored. The

maximum length of a recording

depends on how much memory

remains available.

Record speech or sound

1. In the standby mode, select

Menu > Voice > Voice recorder >

Record.

2. After the recorder start tone is

heard, begin recording speech or

sound.

O r g a n i s e r

10. Organiser

Your phone contains features to help

organise your everyday life, including

an alarm clock, calendar, calculator,

countdown timer, and stopwatch.

Alarm on appears briefly in the

display, and appears in

standby mode.

Alarm conditions

■ Alarm clock

When the alarm sounds, your phone

beeps, vibrates (if vibrate alert is on

in the currently active profile), and

lights up.

Set an alarm

The alarm clock is based on the

phone clock. It sounds an alert any

time you specify and even works if

the phone is turned off.

With the phone on, select Stop to

shut the alarm off or Snooze. If you

select Snooze, the alarm stops for 10

minutes, and Snooze on appears in

the display.

If an alarm is not set

1. In the standby mode, select

Menu > Organiser > Alarm clock.

If you do not press a key, the alarm

stops (snoozes) for 5 minutes, then

sounds again.

2. Enter the time for the alarm in

hh:mm format, and select OK.

If the alarm time is reached while

the phone is switched off, the phone

switches itself on and starts sounding

the alarm tone. If you select Stop,

the device asks whether you want to

activate the phone for calls. Select

No to switch off the device or Yes to

make and receive calls. Do not select

Yes when wireless phone use may

cause interference or danger.

3. Select am or pm if 12-hour clock

format is on.

Alarm on appears briefly in the

display, and

appears in

standby mode.

If an alarm is set

1. In the standby mode, select Menu >

Organiser > Alarm clock > On.

2. Enter the time for the alarm in

hh:mm format, and select OK.

Turn an alarm off

In the standby mode, select Menu >

Organiser > Alarm clock > Off.

O r g a n i s e r

1. Go to the date for which you

want to set a reminder. (See ”Go

to a date” on page 48.)

■ Calendar

The calendar keeps track of

reminders, calls you need to make,

meetings, memo, and birthdays. It

can even sound an alarm for any of

these events.

2. From the monthly view (with the

go to date highlighted), select

Options > Make a note.

3. Select one of the following note

types:

Monthly view provides an overview

of the selected month and weeks. It

also allows you to jump to a specific

date. Any days or dates that appear

in bold font contain calendar notes

such as a meeting or reminder.

Meeting — Enter the subject and

select Options > Save. Enter a

location and select Options >

Save. Enter a start and end time.

Choose an alarm option.

Open

Call — Enter the phone number

and select Options > Save. Enter

a name and select Options >

Save. Enter a time. Choose an

alarm option.

In the standby mode, select Menu >

Organiser > Calendar.

To move the cursor in some calendar

views, use the scroll keys.

Birthday — Enter the person’s

name and select Options > Save.

Enter the year of birth. Choose an

alarm option. Enter a time.

Go to a date

1. In the standby mode, select Menu >

Organiser > Calendar > Options >

Go to date.

Memo — Enter the subject and

select Options > Save. Enter an

end date. Choose an alarm

option. Enter a time.

2. Enter the date (for example,

15/07/2005), and select OK.

Reminder — Enter the reminder

and and select Options > Save.

Choose an alarm option. Enter a

time.

Note a specific date

You can choose from five types of

notes: Meeting, Call, Birthday,

Memo, and Reminder. Your phone

asksforfurtherinformationdepending

on which note you select. You can also

set an alarm for your note.

O r g a n i s e r

Send note — Send the note to

another device using text message,

or in calendar format.

View notes (day view)

After you have created some

calendar notes, you can view them

as follows:

Copy — Copy the note. You can then

paste the note to another date.

1. In the standby mode, select Menu >

Settings — Set the date and time,

date and time format, the day each

week starts and whether you want

your notes to auto-delete after a

specified time.

Organiser > Calendar.

2. Scroll to the date containing the

note. Days with notes appear in

bold type.

3. Select Options > Day notes.

4. To view a highlighted note, select

Send a note

1. In the standby mode, select Menu >

Options > View.

Organiser > Calendar.

Options while viewing a list

of notes

Select Options while viewing the

2. Scroll to the date containing the

note you wish to send. Days with

notes appear in bold type.

day’s notes and one of the following:

3. Select Options > Day notes.

View — View the full note.

4. Scroll to the note you wish to send,

and select Options > Send note >

Via calendar or Via text msg.

Make a note — Create a new note for

the selected date.

Delete — Delete the note.

5. If you select Via calendar, enter

the number for the recipient; or

select Search to retrieve a

Edit — Edit the note.

Move — Move the note to another

date on your calendar.

number from the contacts list,

and select OK. The note is sent.

Repeat — Enable the note to recur on

a regular basis (daily, weekly, bi-

weekly, monthly, and yearly).

6. If you select Via text msg., select

Add number.

7. Enter the number for the

recipient; or select Search to

retrieve a number from the

contacts list, and select OK.

Tip: Repeat is not available for

Birthday note.

Go to date — Jump to another date

on your calendar.

8. Select Options > Send.

O r g a n i s e r

1. In the standby mode, select Menu >

Receive a note in calendar

format

When you receive a calendar note,

your phone displays Calendar note

received. Save the note in your

calendar and set an alarm for any

date and time.

Organiser > Calculator.

2. Enter the first number in the

calculation.

Press # for a decimal point if

necessary.

Press * to cycle through the add

(+), subtract (-), multiply (*), and

divide (/) characters. Pausebriefly

to select the displayed character.

View notes

1. When your phone displays

Calendar note received, select

Show.

3. Enter the second number in your

calculation.

2. Scroll to view the entire message,

if necessary.

4. Select Options (equals is

highlighted).

Save notes

To perform a square or square root

calculation, select Options > Square

or Square root. Select Options >

Change sign or scroll to change the

sign of your result.

After viewing the calendar note,

select Options > Save.

Discard notes

After viewing the calendar note,

select Options > Discard or select

Exit.

Currency converter

You can convert foreign currency to

domestic, or vice versa.

■ Calculator

The calculator in your phone adds,

subtracts, multiplies, divides,

calculates the square and the square

root, changes the sign of the number

entered, and converts currency

values.

1. At the Calculator screen, enter a

currency amount to convert.

2. Select Options > In domestic or In

foreign.

In domestic — converts foreign

currency to domestic currency.

Note: This calculator has a

limited accuracy and is

designed for simple

calculations.

In foreign — converts domestic

currency to foreign currency.

O r g a n i s e r

If you have not done so already,

you are prompted to enter the

exchange rate.

The countdown timer only works

when the phone is on. Once you turn

off your phone, the timer is no

longer active.

3. Enter the exchange rate (press #

to insert a decimal), and select OK.

Set the countdown timer

1. In the standby mode, select Menu >

You can also edit the exchange rate

at any time.

Organiser > Countdown timer.

Note: When you change base

currency, you must key in the

new rates because all

2. Enter the time (in hh:mm

format), and select OK.

previously set exchange rates

are set to zero.

3. Enter a note for the timer, and

select OK.

1. In the standby mode, select

Menu > Organiser > Calculator >

Options > Exchange rate >

Foreign unit expressed in

appears in standby mode when

the countdown timer is set.

When the time runs out, your phone

sounds an alarm, displays the timer

note, and flashes its lights.

domestic units or Domestic unit

expressed in foreign units.

• Press any key during the alarm to

stop the timer.

Foreign unit expressed in

domestic units — The number of

home units it takes to make one

unit of foreign currency.

• After 30 seconds the timer alert

expires automatically.

Domestic unit expressed in

Change the time

After you have set the timer, you can

change the time.

foreign units — The number of

foreign units it takes to make one

unit of your home currency.

1. In the standby mode, select Menu >

Organiser > Countdown timer >

Change time.

2. Enter the exchange rate, and

select OK.

2. Enter the new time, and select

■ Countdown timer

OK.

You can enter a specified time (up to

99 hours and 59 minutes). When the

time runs out, your phone sounds an

alarm.

3. Leave the note as it was, or enter

a new note, and select OK.

O r g a n i s e r

the running time. Each time you

select Split, the new measured

time appears at the beginning of

the list.

Stop the timer before the

alarm sounds

After you have set the timer, you can

stop the timer.

Lap timing — You can use the Lap

time function when you want to

track how long it takes to

In the standby mode, select Menu >

Organiser > Countdown timer > Stop

timer.

complete each cycle or lap. Select

Lap to note the lap time. The

clock stops, then immediately

from zero. The lap time appears

below the running time. Each

time you select Lap, the new

measured time appears at the

beginning of the list.

■ Stopwatch

Your phone has a stopwatch that

can be used to track time. The

stopwatch displays time in hours,

minutes, seconds, and fractions of a

second in hh:mm:ss:ss format.

Using the stopwatch or allowing it

to run in the background when using

other features increases the demand

on battery power and reduces the

battery life.

2. Select Stop to end timing and

display total time.

Save, view or delete times

To save a time while the clock is

running, select Stop > Options >

Save, enter a name for the

Split or lap time

Use the split time or lap time

functions for activities where you

need to pace yourself.

measurement, and select OK. If you

do not enter a name, the total time is

used as the default title for the lap

or split time.

1. In the standby mode, select Menu >

Organiser > Stopwatch > Split

timing or Lap timing > Start.

To view the last measured time,

select Menu > Organiser >

Stopwatch > Split timing or Lap

timing > Show last.

Split timing — You can use the

split time function for such

activities as a long distance race

when you need to pace yourself.

Select Split to note the lapsed

time. The timer continues to run

and the split time appears below

To browse saved times, select

Menu > Organiser > Stopwatch >

Split timing or Lap timing > View

times.

O r g a n i s e r

To delete a saved time, select

Menu > Organiser > Stopwatch >

Split timing or Lap timing > View

times. Select the time you wish to

delete and Options > Delete times.

Select OK at Delete?

You can delete saved times with the

Delete all or One by one option.

Operation note

If you press the end key and return to

standby mode, the clock continues

to run in the background, and

appears in the upper left corner of

the screen.

To return to the stopwatch screens,

do the following:

1. In the standby mode, select

Menu > Organiser > Stopwatch >

Continue.

2. To stop the clock, select Stop.

G a m e s

11. Games

Challenge yourself or a friend to one

of the fun games in your phone.

Some menus listed are network

services. Contact your wireless

provider for more information.

■ Play a game

1. In the standby mode, select

Menu > Games > Select game.

2. Scroll to a game.

3. Options and submenus vary with

each game. Select one of the

following options, if supported by

the game:

New game — Launches a new

game.

High scores — View the high

scores for this game (if previously

played).

Instructions — View instructions

for playing the game. Select More

for more information.

■ Game settings

In the standby mode, select Menu >

Games > Settings > Game sounds,

Game lights, or Shakes.

M i n i b r o w s e r

12. Minibrowser

Minibrowser is a carrier dependent

feature and a network service. See

”Network Services” on page viii, for

more information.

Your wireless provider has created a

home page and set up your browser

to go to this page when you log on to

the mobile Internet. Once at your

service provider’s home page, you

may find links to a number of other

sites.

Your phone has a built-in browser

you can use to connect to selected

services on the mobile Internet. If

your wireless service provider

supports this feature, you can view

weather reports, check news or

flight times, view financial

information, and much more. The

web browser on your phone can

display WAP-based content.

It should not be necessary to

manually configure the browser on

your phone. Normally this is done by

your wireless provider when you

subscribe to the feature. Contact

your wireless provider if you have

problems using the browser.

Your device may have some

bookmarks loaded for sites not

affiliated with Nokia. Nokia does not

warrant or endorse these sites. If you

choose to access them, you should

take the same precautions, for

security and content, as you would

with any Internet site.

■ Sign on to the mobile

Internet

In the standby mode, select Menu >

Minibrowser > Connect.

After a brief pause, your phone

attempts to connect to your wireless

provider’s home page. If you receive

an error message, your phone may

not be set up for browsing. Contact

your wireless provider to make sure

that your phone is configured

properly.

■ Mobile Internet access

Because mobile Internet content is

designed to be viewed from your

phone, your wireless provider is now

your mobile Internet service provider

as well.

M i n i b r o w s e r

After you end your voice call, the

mobile Internet connection

automatically resumes.

■ Navigate the mobile

Internet

Since your phone screen is much

smaller than a computer screen,

mobile Internet content is displayed

differently than you may be

accustomed to seeing. This section

contains guidelines for using phone

keys to navigate a WAP site.

If your wireless service provider does

not support incoming calls while

browsing, incoming calls are

automatically forwarded to voice

mail.

Make an emergency call while

online

You can end your data connection

and make an emergency call.

Phone keys

• To browse the WAP site, scroll up

or down.

1. To close your mobile Internet

connection, press the end key.

• Select a highlighted item.

2. Press the end key as many times

as needed to clear the display and

ready the phone for calls.

• To enter text, press # to switch

text input modes and then press

0-9.

3. Enter the emergency number for

your present location (for

• To enter special characters, press *.

Even if the broswer page does not

have a Back option, you can also

press the end key to go back one

page.

example, 111). Emergency

numbers vary by location.

4. Press the call key.

Disconnect

Receive a call while online

To close your mobile Internet

connection, press and hold the end

key.

Depending on your wireless service

provider, you may still be able to

receive a voice call while using the

WAP browser.

• To answer the incoming call,

press the call key.

• To reject the incoming call, press

the end key.

P C c o n n e c t i v i t y

13. PC connectivity

With the PC Suite you can, for

example, create and send text and

picture messages, synchronise

contacts and calendar between your

phone and a compatible PC. You may

find more information for PC suite in

the support area on the Nokia web

site, www.nokia-asia.com.

Some of the features in PC Suite are

carrier dependent.

E n h a n c e m e n t s

14. Enhancements

Check the model number of any

charger before use with this device.

This device is intended for use when

supplied with power from Nokia

ACP-7 charger.

• Installation of any complex car

enhancements must be made by

qualified personnel only.

Power

• Standard 900-mAh Li-Ion

Battery (BL-5C)

Warning: Use only batteries,

chargers and enhancements

approved by Nokia for use

with this particular model.

The use of any other types

may invalidate any approval

or warranty, and may be

dangerous. For availability of

approved enhancements,

please check with your dealer.

• Retractable Charger (AC-1)

• Travel Charger (ACP-12)

• Standard Travel Charger (ACP-7)

• Mobile Charger (LCH-12)

Audio

• Headset (HS-5)

• Retractable Headset (HS-10)

• Boom Headset (HDB-4)

• FM Stereo Headset (HS-2R)

• Loopset (LPS-4)

A few practical rules about

accessories and enhancements:

• Keep all accessories and

enhancements out of the reach

of small children.

Warning: When using the

headset your ability to hear

outside sounds may be

affected. Do not use the

headset where it can

• When you disconnect the power

cord of any accessory or

enhancement, grasp and pull the

plug, not the cord.

endanger your safety.

• Check regularly that

enhancements installed in a

vehicle are mounted and are

operating properly.

Data

• Data Cable (CA-42)

• Desk Stand with Sync (DCV-14)

E n h a n c e m e n t s

Car

• Car Installation Kit (CARK-126)

• Headrest Handsfree (BHF-1)

• Mobile Holder (MBC-15S)

• Full Car Kit (CK-6)

Covers

• Xpress-on Colour Covers

R e f e r e n c e i n f o r m a t i o n

15. Reference information

This section provides information about

your phone batteries, enhancements,

chargers, safety guidelines and

Use the battery only for its intended

purpose. Never use any charger or

battery that is damaged.

technical information. Be aware that

the information in this section is

subject to change as batteries,

Do not short-circuit the battery.

Accidental short-circuiting can occur

when a metallic object such as a coin,

clip, or pen causes direct connection

of the positive (+) and negative (-)

terminals of the battery. (These look

like metal strips on the battery.) This

might happen, for example, when

you carry a spare battery in your

pocket or purse. Short-circuiting the

terminals may damage the battery or

the connecting object.

chargers, and enhancements change.

■ Batteries and chargers

Your device is powered by a

rechargeable battery. The full

performance of a new battery is

achieved only after two or three

complete charge and discharge

cycles. The battery can be charged

and discharged hundreds of times

but it will eventually wear out. When

the talk and standby times are

noticeably shorter than normal, buy

a new battery. Use only Nokia

approved batteries, and recharge your

battery only with Nokia approved

chargers designated for this device.

Leaving the battery in hot or cold

places, such as in a closed car in

summer or winter conditions, will

reduce the capacity and lifetime of

the battery. Always try to keep the

battery between 59°F and 77°F

(15°C and 25°C). A device with a hot

or cold battery may not work

temporarily, even when the battery

is fully charged. Battery

performance is particularly limited

in temperatures well below freezing.

Unplug the charger from the electrical

plug and the device when not in use.

Do not leave the battery connected

to a charger after the battery has

finished charging. Overcharging may

shorten its lifetime. If left unused, a

fully charged battery will lose its

charge over time. Temperature

extremes can affect the ability of

your battery to charge.

Do not dispose of batteries in a fire

as they may explode. Batteries may

also explode if damaged. Dispose of

batteries according to local regulations.

Please recycle when possible. Do not

dispose as household waste.

R e f e r e n c e i n f o r m a t i o n

When looking at the hologram label,

you should see the Nokia connecting

hands symbol from one angle and the

Nokia Original Enhancements logo

when looking from another angle.

■ Nokia Battery

Authentication

Guidelines(forbatteries

with Nokia Hologram

labels)

Step 2:

Always use original Nokia batteries

for your safety. To check that you are

getting an original Nokia battery,

purchase it from an authorised

Nokia dealer, look for the Nokia

Original Enhancements logo on the

packaging and inspect the hologram

label using the following steps:

When you angle the hologram to the

left, right, down, and up sides of the

logo, you should see 1, 2, 3, and 4

dots on each side respectively.

Successful completion of the four

steps is not a total assurance of the

authenticity of the battery. If you have

any reason to believe that your battery

is not an authentic original Nokia

battery, you should refrain from using

it and take it to the nearest authorised

Nokia service point or dealer for

assistance. Your authorised Nokia

service point or dealer will inspect the

batteryforauthenticity. Ifauthenticity

cannot be verified, return the battery

to the place of purchase.

Step 3:

Scratch the side of the label to

reveal a 20-digit code, for example

12345678919876543210. Turn the

battery so that the numbers are

facing upwards. The 20-digit code

reads starting from the number at

the top row followed by the bottom

row.

How do you check the

authentication features on the

hologram label?

Step 4:

Step 1:

R e f e r e n c e i n f o r m a t i o n

Confirm that the 20-digit code is

valid by verifying it at the Nokia

website or through a text message.

■ Battery information

This section provides information

about battery charging times with

the Standard Charger (ACP-7), the

Mobile Charger (ACP-12), talk-

times, and standby times. Be aware

that the information in this section

is subject to change. For more

information, contact your service

provider.

• Through the Internet:

Go to www.nokia-asia.com/

batterycheck and follow the

instructions; or

• Create a text message:

Key in the 20-digit code, for

example,123456789198765432

10 and send to

Charging times

The following charging times are

approximate:

+61 427 151515

National and international

operator charges will apply.

Charger

options

ACP-12

ACP-7

You should receive a message

indicating whether the code can

be authenticated.

BL-5C mAh

Up to 1.5 Up to 3

Li-Ion battery hours

hours

What if you battery is not verified

as authentic?

Talk and standby times

Operation times are estimates only

and depend on signal strength, phone

use, network conditions, features

used, battery age and condition

(including charging habits),

If you cannot confirm that your

Nokia battery with the hologram

label is an authentic Nokia battery,

please do not use the battery, but

take it to the nearest authorised

Nokia service point or dealer for

assistance. The use of a battery that

is not approved by the manufacturer

may be dangerous and may result in

poor performance and damage to

your device and its enhancements. It

may also invalidate any approval or

warranty applying to the device.

temperatures to which the battery is

exposed, and many other factors.

Function

Talk time

Standby time

Digital

3.5 to 4.5 hours

111 to 169 hours

To find out more about original Nokia

batteries visit www.nokiaoriginals.com.

C a r e a n d m a i n t e n a n c e

16. Care and maintenance

Your device is a product of superior

design and craftsmanship and should be

treated with care. The suggestions below

will help you protect your warranty

coverage and enjoy your device for many

years.

•

Do not store the device in cold areas.

When the device returns to its normal

temperature, moisture can form

inside the device and damage

electronic circuit boards.

•

Do not attempt to open the device

other than as instructed in this guide.

•

Keep the device and all its parts and

enhancements out of the reach of

small children.

Do not drop, knock, or shake the

device. Rough handling can break

internal circuit boards and fine

mechanics.

When you disconnect the power cord

of any accessory or enhancement,

grasp and pull the plug, not the cord.

•

Do not use harsh chemicals, cleaning

solvents, or strong detergents to

clean the device.

Check regularly that enhancements

installed in a vehicle are mounted

and are operating properly.

Do not paint the device. Paint can

clog the moving parts and prevent

proper operation.

Installation of any complex car

enhancements must be made by

qualified personnel only.

Use only the supplied or an approved

replacement antenna. Unauthorised

antennas, modifications, or

attachments could damage the

device and may violate regulations

governing radio devices.

Keep the device dry. Precipitation,

humidity, and all types of liquids or

moisture can contain minerals that

will corrode electronic circuits. If your

device does get wet, remove the

battery and allow the device to dry

completely before replacing it.

•

Use chargers indoors.

All of the above suggestions apply

•

Do not use or store the device in

dusty, dirty areas. Its moving parts

and electronic components can be

damaged.

equally to your device, battery, charger,

or any enhancement. If any device is not

working properly, take it to the nearest

authorised service facility for service.

Do not store the device in hot areas.

High temperatures can shorten the

life of electronic devices, damage

batteries, and warp or melt certain

plastics.

Before sending your device to a service

facility, create a backup of data you want

to keep such as contacts and calendar

notes.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

17. Additional safety information

inadequately protected medical devices.

■ Operating environment

Remember to follow any special

regulations in force in any area and

always switch off your device when its

use is prohibited or when it may cause

interference or danger. Use the device

only in its normal operating positions.

Consult a physician or the manufacturer

of the medical device to determine if they

are adequately shielded from external RF

energy or if you have any questions.

Switch off your phone in health care

facilities when any regulations posted in

these areas instruct you to do so.

Hospitals or health care facilities may be

using equipment that could be sensitive

to external RF energy.

Your device and its enhancements may

contain small parts. Keep them out of the

reach of small children.

This device meets RF exposure guidelines

when used either in the normal use

position against the ear or when

positioned at least 7/8 inch (2.2 cm)

away from the body. When a carry case,

belt clip, or holder is used for body-worn

operation, it should not contain metal

and should position the device at least

7/8 inch (2.2 cm) away from your body.

Pacemakers

Pacemaker manufacturers recommend

that a minimum separation of 6 inches

(15.3 cm) be maintained between a

wireless phone and a pacemaker to avoid

potential interference with the

pacemaker. These recommendations are

consistent with the independent research

by and recommendations of Wireless

Technology Research. To minimise the

potential for interference, persons with

pacemakers should

Parts of the device are magnetic. Metallic

materials may be attracted to the device,

and persons with a hearing aid should

not hold the device to the ear with the

hearing aid. Always secure the device in

its holder, because metallic materials

may be attracted by the earpiece. Do not

place credit cards or other magnetic

storage media near the device, because

information stored on them may be

erased.

•

Always keep the device more than

6 inches (15.3 cm) from their

pacemaker when the device is

switched on

•

Not carry the device in a breast

pocket

Hold the device to the ear opposite

the pacemaker

■ Medical devices

Operation of any radio transmitting

equipment, including wireless phones,

may interfere with the functionality of

If you have any reason to suspect that

interference is taking place, switch off

your device immediately to minimise the

potential for interference.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Hearing Aids

■ Potentially explosive

Some digital wireless devices may

interfere with some hearing aids. If

interference occurs, consult your service

provider.

environments

Switch off your device when in any area

with a potentially explosive atmosphere

and obey all signs and instructions.

Potentially explosive atmospheres

include areas where you would normally

be advised to turn off your vehicle

engine. Sparks in such areas could cause

an explosion or fire resulting in bodily

injury or even death. Switch off the

device at refuelling points such as near

gas pumps at service stations. Observe

restrictions on the use of radio

■ Vehicles

RF signals may affect improperly

installed or inadequately shielded

electronic systems in motor vehicles such

as electronic fuel injection systems,

electronic antiskid (antilock) braking

systems, electronic speed control

systems, air bag systems. For more

information, check with the

equipment in fuel depots, storage, and

distribution areas, chemical plants or

where blasting operations are in

manufacturer or its representative of

your vehicle or any equipment that has

been added.

progress. Areas with a potentially

explosive atmosphere are often but not

always clearly marked. They include

below deck on boats, chemical transfer or

storage facilities, vehicles using liquefied

petroleum gas (such as propane or

butane), and areas where the air contains

chemicals or particles such as grain, dust

or metal powders.

Only qualified personnel should service

the device, or install the device in a

vehicle. Faulty installation or service may

be dangerous and may invalidate any

warranty that may apply to the device.

Check regularly that all wireless device

equipment in your vehicle is mounted

and operating properly. Do not store or

carry flammable liquids, gases, or

Using your device while flying in aircraft

is prohibited. Switch off your device

before boarding an aircraft. The use of

wireless telephones in an aircraft may be

dangerous to the operation of the

aircraft, disrupt the wireless telephone

network, and may be illegal.

explosive materials in the same

compartment as the device, its parts, or

enhancements. For vehicles equipped

with an air bag, remember that an air bag

inflates with great force. Do not place

objects, including installed or portable

wireless equipment in the area over the

air bag or in the air bag deployment area.

If in-vehicle wireless equipment is

improperly installed and the air bag

inflates, serious injury could result.

FCC regulations prohibit using your

wireless device while in the air. The use of

wireless telephones in an aircraft may be

dangerous to the operation of the

aircraft, disrupt the wireless telephone

network, and may be illegal.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

Failure to observe these instructions may

lead to suspension or denial of telephone

services to the offender, legal action, or

both.

■ Emergency calls

Important: Wireless phones,

including this phone, operate

using radio signals, wireless

networks, landline networks, and

user-programmed functions.

Because of this, connections in

all conditions cannot be

guaranteed. You should never

rely solely on any wireless phone

for essential communications

like medical emergencies.

To make an emergency call:

1. If the phone is not on, switch it on.

Check for adequate signal strength.

2. Press the end key as many times as

needed to clear the display and ready

the phone for calls.

3. Enter the official emergency number

for your present location. Emergency

numbers vary by location.

4. Press the call key.

If certain features are in use, you may

first need to turn those features off

before you can make an emergency call.

Consult this guide or your service

provider. When making an emergency

call, give all the necessary information as

accurately as possible. Your wireless

phone may be the only means of

communication at the scene of an

accident. Do not end the call until given

permission to do so.

A d d i t i o n a l s a f e t y i n f o r m a t i o n

The highest SAR value for this model

phone when tested for use at the ear is

0.75 W/kg. While there may be

differences between the SAR levels of

various phones and at various positions,

they all meet the relevant international

guidelines for RF exposure.

■ Certification information

(SAR)

THIS MODEL PHONE MEETS

INTERNATIONAL GUIDELINES FOR

EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter

and receiver. It is designed and

manufactured not to exceed the limits

for exposure to radio frequency (RF)

recommended by international

This product meets RF exposure

guidelines when used either in the

normal use position against the ear or

when positioned at least 2.2 cm away

from the body. When a carry case, belt

clip or holder is used for body-worn

operation, it should not contain metal

and should position the product at least

2.2 cm away from your body.

guidelines (ICNIRP). These limits are part

of comprehensive guidelines and

establish permitted levels of RF energy

for the general population. The guidelines

were developed by independent scientific

organisations through periodic and

thorough evaluation of scientific studies.

The guidelines include a substantial

safety margin designed to assure the

safety of all persons, regardless of age

and health.The exposure standard for

mobile phones employs a unit of

measurement known as the Specific

Absorption Rate, or SAR. The SAR limit

stated in the international guidelines is

2.0 W/kg*. Tests for SAR are conducted

using standard operating positions with

the phone transmitting at its highest

certified power level in all tested

* The SAR limit for mobile phones used by

the public is 2.0 watts/kilogram (W/kg)

averaged over ten grams of body tissue.

The guidelines incorporate a substantial

margin of safety to give additional

protection for the public and to account

for any variations in measurements. SAR

values may vary depending on national

reporting requirements and the network

band. For SAR information in other

regions please look under product

information at www.nokia-asia.com.

frequency bands. Although the SAR is

determined at the highest certified

power level, the actual SAR of the phone

while operating can be well below the

maximum value. This is because the

phone is designed to operate at multiple

power levels so as to use only the power

required to reach the network. In general,

the closer you are to a base station, the

lower the power output of the phone.

Limited Warranty

Nokia Corporation, represented by its Mobile Phones Division ("Nokia") warrants that this Nokia cellular product and/or

genuine Nokia accessory ("Product") is free from defects in material and workmanship, according to the following terms

and conditions:

1. The limited warranty for the cellular phone, data product and all genuine Nokia accessories extends for the first

twelve (12) months beginning on the date of purchase of the Product.

2. The limited warranty extends only to the original consumer purchaser ("Consumer") of the Product and is not

assignable or transferable to any subsequent purchaser/end user.

3. The limited warranty extends only to Consumers who purchase the Product in one of the countries (or areas) set

forth at the end of this document. The limited warranty is only valid in Nokia's intended country (or area) of sale of

the Product.

4. During the limited warranty period, Nokia or its authorised service network will repair or replace, at Nokia's option,

any defective Product or parts thereof with new or factory rebuilt replacement items, and return the Product to the

Consumer in working condition. No charge will be made to the Consumer for either parts or labor in repairing or

replacing the Product. All replaced parts, boards or equipment shall become property of Nokia. The external housing

and cosmetic parts should be free of defects at the time of shipment and, therefore, shall not be covered under these

limited warranty terms.

5. Repaired Product will be warranted for the balance of the original warranty period or for ninety (90) days from the

date of repair, whichever is longer.

6. Upon request from Nokia or its authorised service center, the Consumer must provide purchase receipt or other

information to prove the date and place of purchase.

7. The Consumer shall have no coverage or benefits under this limited warranty if any of the following conditions are

applicable:

a) The Product has been subject to: abnormal use, abnormal condition, improper storage, exposure to excessive

moisture or dampness, exposure to excessive temperature or other such environmental conditions,

unauthorised modifications, unauthorised connections, unauthorised repair including but not limited to use of

unauthorised spare parts in repairs, misuse, neglect, abuse, accident, alteration, improper installation, Acts of

God, spill of foods or liquids, maladjustment of customer controls or other acts which are beyond of reasonable

control of Nokia, including deficiencies in consumable parts such as fuses and breakage or damage to antennas,

unless caused directly by defects in materials or workmanship, and normal wear and tear of the Product.

b) Nokia was not notified by Consumer of the alleged defect or malfunction of the Product during the applicable

limited warranty period.

c) The Product serial number or the accessory date code has been removed, defaced or altered.

d) The defect or damage was caused by defective function of the cellular system or by inadequate signal

reception by the external antenna.

e) The Product was used with or connected to accessory not supplied by Nokia, not fit for use with Nokia cellular

phones or used in other than its intended use.

f) The battery was short circuited or seals of the battery enclosure or cells are broken or show evidence of

tampering or the battery was used in equipment other that for which is has been specified.

8. If a problem develops during the limited warranty period, the Consumer should take the following step-by-step procedure:

a) The Consumer shall return the Product to the place of purchase for repair or replacement processing.

b) If "a" is not convenient, the Consumer may contact the local Nokia office for the location of the nearest

authorised service center.

c) The Consumer shall arrange for the Product to be delivered to the authorised service center. Expenses

related to removing the Product from an installation are not covered under this limited warranty.

d) The Consumer will be billed for any parts or labor charges not covered by this limited warranty. The

Consumer shall be responsible for expenses related to reinstallation of the Product.

e) In case of certain operator specific features in the Product such as SIM-lock, Nokia reserves the right to

refer the Consumer to the relevant cellular operator before service will be provided.

f) If the Product is returned to Nokia after the expiration of the warranty period, Nokia's normal service

policies shall apply and the Consumer will be charged accordingly.

9. THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ANY OTHER RIGHTS AND REMEDIES

UNDER ANY APPLICABLE LEGISLATION THAT CANNOT BE EXCLUDED. OTHERWISE, TO THE EXTENT PERMITTED BY

LAW, ANY IMPLIED WARRANTY IS EXCLUDED AND THE FOREGOING WARRANTY IS THE PURCHASER'S SOLE AND

EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. TO THE EXTENT PERMITTED

BY LAW, NOKIA SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OR A LOSS OF ANTICIPATED

BENEFITS OR PROFITS, LOSS OR IMPAIRMENT OF PRIVACY OF CONVERSATIONS, WORK STOPPAGE OR LOSS OR

IMPAIRMENT OF DATA ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT.

10. Nokia neither assumes nor authorises any authorised service center or any person or entity to assume for it any

other obligation or liability beyond that which is expressly provided for in this limited warranty.

11. All warranty information, product features and specifications are subject to change without notice.

12. The countries (or areas) in which this limited warranty is in force, subject to clause 3 above, are Australia and New

Zealand.

Index

edit 16

send 19

alarm clock 47

countdown timer 51

currency converter 50

antenna 5

anykey answer 34

automate voice mail 25

automatic redial 34

auto-update 39

dialling codes 14

display language 36

DTMF tones 37

back cover

removing 5

replacing 6

emergency calls 37, 56, 66

enhancement settings 39

enhancements 58

ESN viii

batteries and chargers 60

battery

charging 6

charging times 62

removing 5

exchange rate 51

replacing 5

talk and standby times 62

Battery Authentication 61

business cards 19

feature codes 42

games 54

calculator 50

calendar 48

call

headset 6

duration 30

forward 42

help viii

help text 4, 38

caller groups 15

calling cards 34

calls

answering 9

in-call options 9

making 8

indicators and icons 2

care and maintenance 63

Certification information (SAR) 67

charger

keyguard

automatic 36

lock and unlock 9

connecting 6

information 60

times 62

contacts list 13

add 13

languages 36

Limited Warranty 68

loudspeaker 9

delete 18, 19

message folders 26

messages

talk and standby times 62

text

delete 28

entry 11

minibrowser messages 26

picture messages 25

text messages 20

voice messages 24

minibrowser 55

messages 20

time and date settings 38

timed profiles 33

tone settings 39

turn phone on and off 6

minibrowser messages 26

view

network services vii

call duration 30

call times 30

data/fax call duration 31

dialled numbers 29

minibrowser duration 31

missed calls 29

picture messages 26

received calls 29

saved messages 27

voice

organiser 47

phone settings 36

picture messages 25

predictive text 11

profiles 33

commands 45

dialling 44

messages 24

privacy 41

recorder 46

quick keys 2

voicemail 24

volume

adjusting 9

restore factory settings 43

restrict calls 39

using the loudspeaker 9

welcome note 37

safety vi

wireless Internet 55

disconnect 56

SAR value 67

scrolling 4

security 39

set

make an emergency call 56

receive a call while online 56

sign on 55

date 38

time 38

settings 34

shared memory vi

shortcuts 4

standby mode 2

start screen 2

stopwatch 52

Xpress-on covers 7

Psion Teklogix Vehicle Mount Computer 8255 User Manual
Panasonic Camcorder PVGS200 User Manual
Oster Blender 133086 User Manual
Nikon 2191 User Manual
NexxTech 6500542 User Manual
Metra Electronics 99 6505 User Manual
Leica Camera Accessories EZ4 HD User Manual
Lanzar Car Audio Car Stereo System SD82 User Manual
KATA Photoline SB 904 User Manual
JVC GZ MG70AA User Manual