Nokia BH 905I User Manual

Nokia Bluetooth Stereo Headset  
BH-905i with active noise  
cancellation  
User Guide  
9222807  
Issue 1 EN  
Contents  
Pair and connect the headset  
1. Introduction ......................... 4  
Bluetooth wireless technology.......... 4  
About active noise cancellation........ 5  
Reconnect the headset................... 11  
Troubleshooting................................... 11  
2. Get started............................ 6  
Keys and parts........................................ 6  
Connection method .............................. 6  
Connect using Bluetooth  
connectivity......................................... 6  
Connect using the audio  
cables and adapters........................... 7  
Charge the battery................................ 8  
Operating time when using  
3. Basic use ............................. 13  
Place the headset over the head..... 13  
Active noise cancellation.................. 13  
Adjust the volume............................... 13  
Calls......................................................... 14  
Listen to music..................................... 14  
Bass booster and stereo  
widening ................................................ 15  
Clear settings or reset........................ 16  
Bluetooth connectivity..................... 8  
Operating time when using  
the audio cable................................... 9  
Activate or deactivate  
Bluetooth connectivity ........................ 9  
Activate................................................. 9  
Deactivate............................................ 9  
4. Battery and charger  
information............................. 17  
Take care of your device........ 18  
3
I n t r o d u c t i o n  
1. Introduction  
The Nokia Bluetooth Stereo Headset BH-905i with active noise  
cancellation allows you to handle calls hands-free with a compatible  
mobile device and listen to music from a compatible music player.  
Active noise cancellation helps you to use the headset also in noisy  
environments.  
You can connect the headset to a compatible device using Bluetooth  
wireless technology or the supplied audio cables.  
Read this user guide carefully before using the headset. Also, read the  
user guide for the device that you connect to the headset. For more  
This product may contain small parts. Keep them out of the reach of  
small children.  
Note: The surface of this device does not contain nickel in the  
platings. The surface of this device contains stainless steel.  
Bluetooth wireless technology  
Bluetooth wireless technology allows  
you to connect compatible devices  
without cables. The headset and the  
<10m  
other device do not need to be in line  
of sight, but they should be within 10  
metres (33 feet) of each other. The  
closer the headset and the other  
device are to each other, the better  
the performance. The optimal  
operating range is shown in dark grey  
in the picture. The connection is  
subject to interference from distance and obstructions (shown in light  
grey) or other electronic devices.  
The headset is compliant with the Bluetooth Specification 2.1 + EDR  
supporting the following profiles: Headset Profile 1.1, Hands-Free  
4
   
I n t r o d u c t i o n  
Profile (HFP) 1.5, Advanced Audio Distribution Profile (A2DP) 1.2, and  
Audio Video Remote Control Profile 1.0. Check with the manufacturers  
of other devices to determine their compatibility with this device.  
About active noise cancellation  
Wolfson AudioPlusTM Ambient Noise Cancellation technology uses  
patented signal processing technology and advanced acoustic design  
expertise to deliver class-leading active noise cancellation for stereo  
headsets and headphones.  
This novel feed-forward technology cancels more decibels of noise  
across a wider frequency range than traditional feedback technologies,  
providing a peaceful and tranquil environment for users wherever they  
happen to be. As Wolfson's advanced technology does not process the  
playback audio stream, your music comes through in untouched hi-fi  
quality stereo.  
5
 
G e t s t a r t e d  
2. Get started  
Keys and parts  
The headset contains the following parts:  
1. Power key for active noise  
cancellation  
2. Indicator light for charging  
and active noise  
cancellation  
3. Charger connector  
4. Volume keys  
5. Rewind key  
6. Connector for Nokia CA-143U or CA-182U audio cable  
7. Bluetooth indicator light  
8. Play/Pause key  
9. Forward key  
10. Multifunction key  
Parts of the device are magnetic. Metallic materials may be attracted to the  
device. Do not place credit cards or other magnetic storage media near the  
device, because information stored on them may be erased.  
Connection method  
You can connect the headset to compatible devices using Bluetooth  
wireless technology or the supplied audio cables.  
Before you can connect the headset to a Bluetooth device or use active  
noise cancellation, you must charge the battery. See “Charge the  
battery”, p. 8.  
Connect using Bluetooth connectivity  
To use the headset with a compatible Bluetooth device, activate  
Bluetooth connectivity (see “Activate”, p. 9) and pair and connect the  
6
       
G e t s t a r t e d  
headset to the device (see “Pair and connect the headset to a Bluetooth  
device”, p. 10).  
If you plug the CA-143U or CA-182U audio cable into the headset when  
the headset is connected to a Bluetooth device, the device is  
disconnected and Bluetooth connectivity is deactivated.  
Connect using the audio cables and adapters  
The headset is supplied with the Nokia CA-143U and CA-182U audio  
cables. The headset may also be supplied with adapters to connect the  
cable to different devices.  
Audio cable CA-143U  
To connect the headset to a compatible Nokia device that has the Nokia  
3.5 mm AV connector, plug the CA-143U audio cable into the headset  
and the AV connector.  
Audio cable CA-182U  
To connect the headset to a compatible Nokia device, sold by a cellular  
service provider in North America, that has a 3.5 mm audio connector or  
to a device, produced by another manufacturer, that has a compatible  
3.5 mm audio connector, plug the CA-182U audio cable into the  
headset and the connector.  
When you connect the headset to a device by some other manufacturer,  
the headset keys cannot be used.  
Extension cable and adapters  
To extend the length of the audio cable, use the CA-144U extension  
cable.  
To connect the headset to a device that has a standard 3.5 mm audio  
connector, plug the audio cable into the headset and the AD-63  
adapter, and insert the adapter into the audio connector.  
To connect the headset to a device that has the Nokia 2.5 mm AV  
connector, plug the audio cable into the headset and the AD-52  
adapter, and insert the adapter into the AV connector.  
To connect the headset to a home stereo system that has a standard  
6.3 mm headphone connector, plug the audio cable into the headset  
7
 
G e t s t a r t e d  
and the AD-70 adapter, and insert the adapter into the headphone  
connector.  
To connect the headset to an airplane audio system that has a 3.5 mm  
headphone connector, plug the audio cable into the headset and the  
AD-71 adapter, and insert the adapter into the headphone connector.  
To use the headset for internet (VoIP) calls, plug the CA-143U audio  
cable into the headset and the AD-77 adapter, and insert the adapter  
into the headphone and microphone connectors on your computer.  
Charge the battery  
Before you can connect the headset to a Bluetooth device or use active  
noise cancellation, you must charge the battery.  
Before charging the battery, carefully read “Battery and charger  
information”, p. 17.  
1. Connect the charger to a wall outlet.  
2. Connect the charger cable to the charger connector. The indicator  
light for charging and active noise cancellation is red during  
charging.  
Charging the battery fully may take up to 2 hours.  
3. When the battery is fully charged, the indicator light turns green.  
Disconnect the charger from the headset, then from the wall outlet.  
When you unplug a charger, hold and pull the plug, not the cord.  
When the battery charge is low and Bluetooth connectivity is activated,  
the headset beeps every 5 minutes and the indicator light for charging  
and active noise cancellation flashes red.  
Operating time when using Bluetooth connectivity  
When active noise cancellation is activated, the fully charged battery  
has power for up to 15 hours of talk time, up to 40 hours of standby  
time, or up to 16 hours of music playing time.  
When active noise cancellation is deactivated, the fully charged battery  
has power for up to 24 hours of talk time, up to 600 hours of standby  
time, or up to 25 hours of music playing time.  
8
   
G e t s t a r t e d  
Operating time when using the audio cable  
The fully charged battery has power for up to 40 hours of active noise  
cancellation.  
Activate or deactivate Bluetooth connectivity  
When Bluetooth connectivity is activated, you can connect the headset  
to one or two compatible Bluetooth devices.  
Even if Bluetooth connectivity is deactivated, you can use the headset  
for handling calls and listening to music through the supplied audio  
cables.  
Activate  
To activate Bluetooth connectivity, press and hold the multifunction key  
for about 2 seconds. The headset beeps, and the Bluetooth indicator  
light briefly flashes green.  
The headset tries to connect to the last used mobile device that supports  
the HFP Bluetooth profile and the last used music player that supports  
the A2DP profile, if the same device does not support both profiles.  
When the headset is connected to the device and is ready for use, the  
Bluetooth indicator light flashes blue slowly.  
If the headset has not been previously paired with any device, it  
automatically enters pairing mode. See also “Pair and connect the  
headset to a Bluetooth device”, p. 10.  
Deactivate  
To deactivate Bluetooth connectivity, press and hold the multifunction  
key for about 5 seconds. The headset beeps, and the Bluetooth indicator  
light briefly flashes red.  
If the headset is not connected to a Bluetooth device within about 30  
minutes, the headset deactivates Bluetooth connectivity automatically.  
Bluetooth connectivity is also deactivated if you connect the CA-143U  
or CA-182U audio cable to the headset.  
9
       
G e t s t a r t e d  
Pair and connect the headset to a Bluetooth  
device  
If your mobile device supports the A2DP Bluetooth profile and has a  
music player feature, you can use the device to also play music through  
the headset.  
If your mobile device does not support the A2DP profile, you can  
separately pair the headset with the mobile device and a music player  
that supports this profile. If you have paired and connected the headset  
with your mobile device, disconnect the headset from it before pairing  
the headset with the music player.  
1. Ensure that your mobile device or music player is switched on.  
2. To pair the headset if it has not been previously paired with a device,  
activate Bluetooth connectivity on the headset. The headset enters  
pairing mode, and the Bluetooth indicator light starts to flash blue  
quickly.  
To pair the headset if it has been previously paired with a device,  
ensure that Bluetooth connectivity is deactivated on the headset,  
and press and hold the multifunction key (for about 5 seconds) until  
the blue indicator light starts to flash quickly.  
3. Within about 3 minutes, activate Bluetooth connectivity on your  
mobile device or music player, and set it to search for Bluetooth  
devices. For instructions, see the user guide of your device .  
4. Select the headset from the list of found devices on your mobile  
device or music player.  
5. If necessary, enter the passcode 0000 to pair and connect the  
headset to your device. If your device does not have a keypad, it may  
use this passcode by default.  
In some devices, you may need to make the connection separately  
after pairing. You only need to pair the headset with your device  
once.  
If pairing is successful, the headset appears in the menu of your device  
where you can view the currently paired Bluetooth devices.  
10  
 
G e t s t a r t e d  
When the headset is connected to your device and is ready for use, the  
Bluetooth indicator light flashes blue slowly.  
You can pair the headset with up to eight devices but connect it to only  
one device supporting the HFP Bluetooth profile and another device  
supporting the A2DP Bluetooth profile at a time.  
Disconnect the headset  
To disconnect the headset from your Bluetooth device, deactivate  
Bluetooth connectivity on the headset, or disconnect the headset in the  
Bluetooth menu of your device. If you disconnect the headset from a  
music player while listening to music, first press the play/pause key to  
pause playing.  
You do not need to delete pairing with the headset to disconnect it.  
Reconnect the headset  
To manually connect the headset to the last used device that supports  
the A2DP Bluetooth profile, but not the HFP profile (for example, after  
connection loss), deactivate and activate Bluetooth connectivity on the  
headset, or press the play/pause key when Bluetooth connectivity is  
activated.  
To manually connect the headset to the last used device that supports  
the HFP Bluetooth profile or the HFP and A2DP profiles, start the  
connection in the Bluetooth menu of your device, or press and hold the  
multifunction key for about 2 seconds.  
You may be able to set your device so that the headset connects to it  
automatically. To activate this feature in a Nokia device, change the  
paired device settings in the Bluetooth menu.  
Troubleshooting  
If you cannot connect the headset to your compatible Bluetooth device,  
do the following:  
• Ensure that the headset is charged.  
11  
     
G e t s t a r t e d  
• Ensure that Bluetooth connectivity is activated on the headset and  
the other device and the headset is paired with your device.  
• Ensure that the CA-143U or CA-182U audio cable is not connected  
to the headset.  
• Ensure that the headset is within 10 metres (33 feet) of your device  
and that there are no obstructions between the headset and the  
device, such as walls, or other electronic devices.  
See also “Clear settings or reset”, p. 16.  
12  
B a s i c u s e  
3. Basic use  
Place the headset over the head  
Turn the speaker pads towards each other, and place the headset over  
your head so that the pads rest comfortably on your ears.  
Place the pad indicated with L on the left ear and the pad with R on the  
right ear. Adjust the headband length for the best fit.  
Warning: When you use the headset, your ability to hear outside  
sounds may be affected. Do not use the headset where it can endanger  
your safety.  
When you stop using the headset, ensure that active noise cancellation  
is deactivated to save battery power.  
Active noise cancellation  
Active noise cancellation reduces ambient noise in noisy environments.  
You can also use active noise cancellation for noise reduction, for  
example, on an airplane when Bluetooth connectivity is deactivated and  
the CA-143U or CA-182U audio cable is not connected to the headset.  
To activate active noise cancellation, slide the power key for active noise  
cancellation toward the charger connector. The indicator light for  
charging and active noise cancellation is displayed green.  
To deactivate active noise cancellation, slide the power key away from  
the charger connector. The indicator light for charging and active noise  
cancellation turns off.  
Adjust the volume  
To adjust the headset volume, press the volume up or down key during a  
call or while listening to music. To adjust the volume quickly, press and  
hold either key.  
You can also adjust the volume on the connected device if it supports  
this feature with the headset.  
13  
       
B a s i c u s e  
Calls  
To make a call, use your mobile device in the normal way when the  
headset is connected to it.  
To redial the number you last called (if your mobile device supports this  
feature with the headset), when no call or music playback is in progress,  
press the multifunction key twice.  
To activate voice dialling (if your mobile device supports this feature  
with the headset), when no call is in progress, press and hold the  
multifunction key for about 2 seconds until the mobile device starts  
voice dialling, and proceed as described in the user guide of your mobile  
device.  
To answer or end a call, press the multifunction key, or use the keys of  
the mobile device. To reject a call, press the multifunction key twice  
quickly.  
To mute or unmute the microphone during a call when using Bluetooth  
connectivity, press and hold the play/pause key for about 2 seconds.  
When the microphone is muted, the Bluetooth indicator light flashes  
blue twice every 5 seconds.  
To switch a call between the headset and your connected device when  
using Bluetooth connectivity, press and hold the multifunction key for  
about 2 seconds.  
To switch a call from the headset to the connected device when using  
the audio cable, disconnect the CA-143U or CA-182U cable from the  
headset. To switch the call back to the headset, reconnect the cable.  
Listen to music  
To listen to music, connect the headset to a compatible music player  
using Bluetooth wireless technology or the CA-143U or CA-182U audio  
cable. If you connect the headset to a Bluetooth device, ensure that it  
supports the A2DP Bluetooth profile.  
The available music functions depend on your music player.  
If you receive or make a call while listening to music, the music is  
paused until you end the call.  
14  
   
B a s i c u s e  
Warning: Listen to the headset at a moderate level.  
To play a song, select the song in the music player, and press the play/  
pause key.  
To pause or resume playing, press the play/pause key when using  
Bluetooth connectivity, or press and hold the play/pause key when using  
the audio cable.  
To stop playing when using Bluetooth connectivity, press and hold the  
play/pause key for about 2 seconds.  
To select the next song during playback, press the forward key. To select  
the previous song, press the rewind key. To scroll through the current  
song quickly, press and hold either key.  
Bass booster and stereo widening  
You can activate the bass booster and stereo widening effects while you  
listen to music from a compatible music player using Bluetooth wireless  
technology.  
The effects are available if your music player uses SBC encoding. If the  
music player uses MP3 or AAC direct streaming instead of SBC, the  
effects are not available. For more information, see the user guide of  
your music player.  
To select the desired effect while listening:  
• To activate the bass booster effect, press the multifunction key. The  
headset beeps once.  
• To activate the stereo widening effect, after one second, press the  
multifunction key a second time. The headset beeps twice.  
• To activate the bass booster and stereo widening effect, press the  
multifunction key a third time. The headset beeps three times.  
• To deactivate the effects, press the multifunction key a fourth time.  
The headset plays a long beep.  
The headset saves the selected setting for future use.  
15  
 
B a s i c u s e  
Clear settings or reset  
To clear the volume and pairing settings from the headset, deactivate  
Bluetooth connectivity, and press and hold the multifunction key and  
the volume up key (for about 5 seconds) until the Bluetooth indicator  
light starts to alternate between red and green.  
To reset the headset if it stops functioning, even though it is charged,  
press the volume down key, the multifunction key, and the rewind key at  
the same time. The reset does not clear the settings.  
16  
 
B a t t e r y a n d c h a r g e r i n f o r m a t i o n  
4. Battery and charger information  
This device has an internal, nonremovable, rechargeable battery. Do not attempt  
to remove the battery from the device as you may damage the device. This device  
is intended for use when supplied with power from the following chargers: AC-3,  
AC-4, AC-5, AC-15, and DC-4. The exact charger model number may vary  
depending on the type of plug. The plug variant is identified by one of the  
following: E, X, AR, U, A, C, K, or B. The battery can be charged and discharged  
hundreds of times, but it will eventually wear out.  
Operating times are estimates only. Actual times are affected by, for example,  
device settings, features being used, battery condition, and temperature.  
If the battery has not been used for a long time, to begin charging, you may need  
to connect the charger, then disconnect and reconnect it.  
If the battery is completely discharged, it may take several minutes before the  
charging indicator is displayed.  
When your charger is not in use, unplug it from the electrical plug and the device.  
Do not leave a fully charged battery connected to a charger, as overcharging may  
shorten the battery's lifetime. If left unused, a fully charged battery will lose its  
charge over time.  
Always keep the battery between 15°C and 25°C (59°F and 77°F). Extreme  
temperatures reduce the capacity and lifetime of the battery. A device with a hot  
or cold battery may not work temporarily.  
Do not dispose of batteries in a fire as they may explode. Dispose of batteries  
according to local regulations. Recycle when possible. Do not dispose as  
household waste.  
Use the charger for its intended purpose only. Improper use or use of unapproved  
chargers may present a risk of fire, explosion, or other hazard, and may invalidate  
any approval or warranty. If you believe the charger is damaged, take it to a  
service centre for inspection before continuing to use it. Never use a damaged  
charger. Only use the charger indoors.  
17  
 
T a k e c a r e o f y o u r d e v i c e  
Take care of your device  
Handle your device, charger and accessories with care. The following suggestions  
help you protect your warranty coverage.  
Keep the device dry. Precipitation, humidity, and all types of liquids or  
moisture can contain minerals that corrode electronic circuits. If your device  
gets wet, allow it to dry completely.  
Do not use or store the device in dusty or dirty areas. Moving parts and  
electronic components can be damaged.  
Do not store the device in high temperatures. High temperatures can shorten  
the life of the device, damage the battery, and warp or melt plastics.  
Do not store the device in cold temperatures. When the device warms to its  
normal temperature, moisture can form inside the device and damage  
electronic circuits.  
Do not attempt to open the device.  
Do not drop, knock, or shake the device. Rough handling can break internal  
circuit boards and mechanics.  
Only use a soft, clean, dry cloth to clean the surface of the device.  
Do not paint the device. Paint can clog the moving parts and prevent proper  
operation.  
Recycle  
Always return your used electronic products, batteries, and packaging materials  
to dedicated collection points. This way you help prevent uncontrolled waste  
disposal and promote the recycling of materials. Check product environmental  
The crossed-out wheeled-bin symbol on your product, battery, literature,  
or packaging reminds you that all electrical and electronic products,  
batteries, and accumulators must be taken to separate collection at the  
end of their working life. This requirement applies in the European Union.  
Do not dispose of these products as unsorted municipal waste. For more  
ecodeclaration.  
18  
 
T a k e c a r e o f y o u r d e v i c e  
Wolfson Microelectronics plc is a leading global provider for high performance,  
mixed signal semiconductors to the consumer electronics market.  
Wolfson is renowned for its high performance audio and very low power  
consumption. Its devices are at the heart of many high profile consumer  
electronics products, including mobile phones, multimedia players, flat panel TVs  
and in-car infotainment systems. Wolfson technology enables exciting new end-  
user experiences by connecting the digital world to the human senses.  
For more information about Wolfson Microelectronics, see  
19  

Raymarine Radar equipment Combined Pathfinder Radar User Manual
Panasonic NV GS11GN User Manual
Panasonic Hc V520 Digital Camcorder HCV520K User Manual
Panasonic Car Stereo System RD 1201 User Manual
Nikon iMacTM User Manual
Marantz PMD620MKII User Manual
Kenwood Car Stereo System KDC W3537 User Manual
JVC LYT2046 001A M User Manual
JVC High Definition Camcorder GZ E200 User Manual
JVC HA KD S600 User Manual