Nokia 6090 User Manual

Electronic user’s guide released subject to “Nokia User’s Guide Terms and Conditions, 7th June, 1998”.

User‘s Guide

9352245

Issue 3

Smart Tips

With display clear, press u to access the

Redial

Smart Tips

last-dialled numbers.

These Smart Tips pages include some useful tips for efficient us-

age of your phone.

Adjusting the

volume

Press b during a call.

For more detailed information, read through the user ’s guide.

Switching to

handsfree

Press c, then put the handset back onto

the cradle.

Lift off the handset

Press at least one push button of the cradle

to lift off the handset.

Phone book functions

Quick save

Key in the phone number, press b to change

in Phone book the Navi Key text to Save.

Press M (Save).

Key in the name and press M (OK).

Quick find

Press d (with display clear), key in the first

Call functions

in Phone book letter of the name and use b to scroll to the

desired name.

Making a call

Key in the phone number including the area

code, press the Navi Key M (Call).

Press and hold # to view the phone

number.

Answering a call Press the Navi Key M (Answer).

Ending a call Press the Navi Key M (End).

Using the Phone To access the Phone book during a call,

book during a press c, M (Options) and

Rejecting a call Press c upon receiving an incoming call.

(If the Divert when busy function is acti-

vated, rejecting an incoming call will also di-

vert the call).

call

select Phone book.

Smart Tips

Storing a phone Press M (Menu), M (Select),

Writing / send- Press M (Menu), 2, 3, key in a

ing a message message (press # to change between up-

per and lower case characters,

number for

use b to find Speed dials,

speed dialling

press M (Select), M (Assign),

find the desired name/phone number and

press M (OK).

press and hold # for numbers,

press * for special characters).

Press M (Options), access Sendvia b,

press M (OK), enter the phone number or

search for it in the Phone book using b,

then press M (OK).

Speed dialling Press a number key 1 - 9 and

press M (Call).

Calling the

mailbox

Press and hold 1 to dial the voice mailbox

number. (The voice mailbox number has to

be stored in the memory).

SIM card

priority

Press M (Menu), 4, 2, 7, 1

to prioritise radio unit SIM or

press M (Menu), 4, 2, 7, 2

to prioritise handset SIM.

One touch

dialling

If the Speed diallingfunction in the menu is

activated, press and hold a number key 2

- 9 for one touch dialling.

Selecting a

Press M (Menu), 9, 2 to select a

ringing tone

ringing tone out of the available list.

Essential shortcuts

Selecting the

ringing volume ringing volume level.

Press M (Menu), 9, 3 to select the

Reading

Press M (Read) to reach the messages,

messages

use b to browse through the messages.

Press M (Options) for available options.

Press c to exit the messages.

Table of contents

Other Essential Functions . . . . . . . . . . . . . . . . . . . . . 15

Table of contents

Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Selecting a ringing tone . . . . . . . . . . . . . . . . . . . . . . . . . 15

In-call options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Voice messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Text messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Fax and data call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Ignition sense . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Automatic power-off . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Car radio mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Backlight dimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Smart Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About labels on your car phone . . . . . . . . . . . . . . . . . . . . 8

Security code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Accessing the menus by scrolling . . . . . . . . . . . . . . . . . 19

Accessing the menus by shortcut . . . . . . . . . . . . . . . . . 19

List of menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1 Phone book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

2 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3 Call register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 Call divert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6 Call counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

7 Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

8 Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

9 Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Inserting a SIM card in the radio unit . . . . . . . . . . . . . . . 9

Inserting a SIM card in the handset . . . . . . . . . . . . . . . . . 9

Using the keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Switching the car phone on and off . . . . . . . . . . . . . . . . 10

The display indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Basic Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Redialling last number . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Storing a name and phone number in the Phone book 13

Making a call using the Phone book . . . . . . . . . . . . . . . 14

Table of contents

Reference Information . . . . . . . . . . . . . . . . . . . . . . . . 34

Facts about cellular transmission . . . . . . . . . . . . . . . . . . 34

Access codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Battery information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

6090 DIN/ISO installation kit . . . . . . . . . . . . . . . . . . . . . 37

GSM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Data cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 38

Important Safety Information . . . . . . . . . . . . . . . . . 39

Traffic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Electronic devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Potentially explosive atmospheres . . . . . . . . . . . . . . . . . 40

Vehicles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Limited Manufacturer’s Warranty . . . . . . . . . . . . 48

USE QUALIFIED SERVICE

Only qualified service personnel must install or repair

equipment.

For Your Safety

Read these simple guidelines. Breaking the rules may be

dangerous or illegal. Further detailed information is giv-

en in this manual.

ACCESSORIES

Use only approved accessories. Do not connect incom-

patible products.

ROAD SAFETY COMES FIRST

Don‘t use a handheld phone while driving; park the ve-

hicle first.

CONNECTION TO OTHER DEVICES

When connecting to any other device, read its user’s

guide for detailed safety instructions. Do not connect in-

compatible products. Remember to make backup copies

of all important data.

INTERFERENCE

All wireless phones may get interference which could af-

fect performance.

MAKING CALLS

SWITCH OFF IN HOSPITALS

Ensure the phone is switched on and in service. Enter the

phone number, including the area code, then press

M (Call). To end a call, press M (End).

To answer a call press M (Answer).

Follow any regulations or rules. Switch phone off near

medical equipment.

SWITCH OFF WHEN REFUELING

Don‘t use phone at a refuelling point. Don‘t use near fuel

or chemicals.

EMERGENCY CALLS

Make sure the phone is switched on and in service. Hold

c for several seconds, to clear the display. Enter the

emergency number, then press M (Call). Give your

location. Do not end the call until told to do so.

SWITCH OFF NEAR BLASTING

Don‘t use phone where blasting is in progress. Observe

restrictions, and follow any regulations or rules.

MAGNETISM

ANTENNA

ATM and credit cards brought into contact with the cra-

dle may be demagnetized and information stored on the

card erased. Avoid storage of ATM and credit cards near

your cradle.

In order to comply with RF exposure requirements for

mobile transmitting devices, a minimum distance of

20 cm must be maintained between the antenna and

all persons.

Welcome

Using this guide

Congratulations on the purchase of this car phone, which allows

you to access GSM900 networks worldwide.

The car phone described in this guide is approved for use on the

GSM900 network.

GSM, the Global System for Mobile Communications, is the dig-

ital standard used in many countries throughout the world, en-

abling you to benefit from the GSM services provided by your

car phone.

There are a number of features included in this guide which are

called Network Services. They are special services provided by

wireless service providers. Before you can take advantage of any

of these Network Services, you must subscribe to these services

with your home service provider and obtain instructions for

their use.

About labels on your car phone

Your car phone has labels on it which are important for service

and related purposes. Therefore be careful not to remove or lose

any label or the information it contains.

In this manual, the menu names and commands that appear on

the display of your phone are always in boldprint. For example:

Phone book, calling.

Security code

The factory setting for the security code is 12345. It is supplied

with the car phone on an identification sticker. The security

code protects your car phone against unauthorised use.

Change the code, see “4-3 Security settings” on page 28, and

keep the new code secret and in a safe place separate from the

car phone.

Inserting a SIM card in the radio unit

The SIM card and the contacts stored in it can easily be dam-

aged if scratched or bent, so be careful when handling, inserting

or removing the card.

1. Getting Started

Your car phone consists of

two major parts:

1. Handset

2. Radio unit

Before you insert the SIM card,

make sure that the car phone

has been switched off!

Before you can use your car

phone, you must place a

SIM (Subscriber Identity

Module) card in the phone.

Insert the SIM card into the slot

so that the contacts are towards

the radio unit.

Your car phone has two SIM card readers: one in the radio unit

and the other in the handset. The factory setting assigns the

card reader in the handset priority; the car phone will only work

with the prioritised card (e.g. Phone book).

Inserting a SIM card in the handset

Warning! Keep all miniature

SIM cards out of the reach of

small children.

The user can change the priority of the card readers for use via

the menu, see “4-2-7 SIM card priority” on page 28. The user‘s

priority setting is then used as a default setting. If only one

reader is initially loaded with a card, that reader is automatical-

ly used.

Before you insert the SIM card,

make sure that the car phone

has been switched off!

1. Press at least one push but-

ton of the cradle to lift off

the handset.

If an invalid or corrupted SIM card is used in the prioritised card

reader, the user is notified through a message on the display.

The phone will not try to use a different card reader with a lower

priority. Switch off the car phone and remove the invalid SIM

card. Then restart the car phone. The car phone will then work

with the second SIM card.

2. At the back of the handset,

push the cover for the SIM

card aside.

3. Insert the SIM card and close

the cover.

Using the keys

The clear key c

Using the keys

Navi key M

• Use c to delete a character to the left of the cursor,

• to clear all the characters keyed in from the display (press

and hold),

The use of the phone is largely based

on the Nokia Navi^TMkey M, located

below the display. The function of the

Nokia Navi^TMkey M varies accord-

ing to the guiding text shown above

the key on the display.

• to return from a submenu to the previous menu level in the

menu facility,

• to exit the menu facility,

• to switch to handsfree,

• to activate options while you have a call in progress and

• to reject an incoming call.

Throughout this user’s guide, the rele-

vant guiding text is mentioned togeth-

er with the Nokia Navi^TMkey, e.g.

M (Menu) or M (Select).

Switching the car phone on and off o

Warning! Do not switch on the car phone when wireless phone

use is prohibited or when it may cause interference or danger.

Scroll keys b

Scroll keys are used to browse through

menus, submenus and settings and to

move the cursor to the right or left.

Press and hold the o key for a second.

Note: Your car phone will not work unless sufficient battery

power is supplied through your car battery.

With clear display, press d once to

access the names and phone numbers

stored in the Phone book.

If the handset asks for the PIN code

With clear display, press u once to

access the list of last-dialled numbers.

During a call, press b to adjust the

volume.

The PIN code protects your SIM card against unauthorised use

and is usually supplied with the SIM card.

Note: Your car phone may have two different SIM cards: one

card in the handset and one SIM card in the radio unit.

The display indicators

Key in the PIN code of the SIM card used

(factory setting: SIM card of the handset),

which is displayed as ****, and press M

(OK), see “4-3-5 Change access codes” on

page 29.

The display indicators

The indicators described below are shown

when the car phone is ready for use, and no

characters have been entered by the user.

This is also called a “clear display”.

Enter PIN code

of handset SIM

****

10:12

Operator

Note: If you enter an incorrect PIN three times in succession,

the card is blocked and you have to re-enter the PIN using the

personal unblocking key number (PUK), see “Access codes” on

page 35.

Operator Indicates which cellular network

the car phone is currently being used in.

Depending on your SIM card, the name of the ser-

vice provider may be shown in the next line.

Note: If your SIM card is lost or stolen, immediately inform your

network operator or service provider to block the card and thus

prevent any unauthorised use at your expense. As a rule, you will

have to specify your name, the SIM card number and your sub-

scriber‘s number.

Shows the signal strength of the cellular network at

your current location: the higher the bar, the stron-

ger the signal.

10:12

Shows the time.

Shows that you have received a short message.

Notifys divert of all voice calls.

Shows that the phone is in silent mode.

If the handset asks for a security code

‰

Key in the security code, which is displayed

as *****, and press M (OK), see “About

labels on your car phone” on page 8.

Security

code

*****

Note: If you take out the SIM card while the

phone is in operation, information could be

lost.

Making a call

To be able to switch to handsfree mode and continue an on-go-

ing call, first press c and then put the handset back in the

cradle.

2. Basic Functions

Making a call

Receiving a call

When a call is put through to you, the phone

1. Key in the phone number including the

area code. The text Menuchanges to Call.

Correct keying mistakes by pressing c

to delete the last character to the left.

will ring and flash either the caller’s name or

phone number or the text calling.

23456789

012345678

Call

½calling

Answer

2. Press M (Call) and wait for the an-

To answer the call, press M (Answer).

Calling

swer. The text Callchanges to End.

Note: If more than one name with the same last seven digits as

the caller’s phone number is found in the Phone book, only the

caller’s phone number is displayed if available.

3. Press M (End) to finish the call

End

(or to cancel the call attempt).

To reject an incoming call, press c. If the Divert when busy

function is activated to divert the calls, e.g. to your voice mail-

box, rejecting an incoming call will also divert the call, see “5

Call divert” on page 30.

International call

1. Press * twice for the international prefix (+ character re-

places the international access code).

2. Enter the country code, the area code and the phone number.

If you select Automatic answer(see “4-1 Call settings” on page

27) your phone is set to automatically answer an incoming call

after one ring.

3. To call the number, press M (Call).

Handsfree mode

Note: If you are using the handsfree mode, you do not have to

take the handset out of its cradle. Lift the handset from its cra-

dle only if you want to speak privately. If you put the handset

back into its cradle without pressing c first, you will termi-

nate the call!

When you are using the handset while it remains in its cradle,

the phone automatically works in handsfree mode. You can

switch from handsfree to private mode by picking up the hand-

set. If you replace the handset on the cradle, the call is termi-

nated.

Adjusting the volume

3. Use b to access Add entry and press

Adjusting the volume

You can adjust the handset volume of the

phone during a call. Press u to increase and

d to decrease the volume level.

1-3

Add entry

Erase

M (Select).

Volume

Name:prompt is displayed.

Select

4. Key in the desired name as follows:

You can also adjust the handsfree volume of

the phone during a call. Press u to increase

and d to decrease the volume level.

Press the key labelled with the character you want: press

once for the first character, twice (before the cursor appears)

for the second, etc.

The available character set depends on the selected lan-

guage, see “4-2-1 Language” on page 27.

Redialling last number

The last eight phone numbers you called or attempted to call are

stored in the car phone’s memory. To redial one of these last-

dialled numbers,

• Press a key 0 - 9 repeatedly to find characters, e. g.

1 for characters . , ? ! - & 1 and 0 gives a space,

• # switches between upper- and lower-case characters.

The ABCor abcindicator is shown on the display.

1. with display clear, press u once to ac-

cess the list of the last-dialled numbers.

2. Use b to access the desired number.

3. Press M (Call).

Dialled 1:

• Press and hold # to switch between characters and

numbers. The ABC(abc) or 123indicator is shown on the

display.

23456789

Call

• You can also add a number by pressing and holding the

appropriate number key for a second.

Storing a name and phone number in the

Phone book

When the flashing cursor appears, you can enter the next

character.

1. Press M (Menu) to access the menu

facility.

Press b to move the cursor.

Phone book

2. With Phone bookdisplayed, press M

Select

(Select).

Making a call using the Phone book

Press * to call up a list of special char-

acters. The ?!£indicator is shown.

Making a call using the Phone book

1. Press M (Menu).

¹ ? ! £

. , ? ! : ; - + # *

()'"_@&$£%

/< >¿ ¡§=º¢¥

Use

Use b to scroll to the desired character

and press M (Use) to add it to the

name.

2. With Phone bookdisplayed, press M (Select).

3. Press M (Select) to choose Search.

5. When you have written the name, press

4. Key in the first letter(s) of the name and press M (OK).

M (OK).

Number:

You can skip this step if you like.

Number:prompt is displayed.

5. Use b to reach the desired name. You can check the phone

number by pressing and holding #.

6. Key in the country code (if necessary), the

area code and phone number.

6. Press M (Call).

Note: If you key in the + character for the international pre-

fix (by pressing * twice) in front of the country code, you

can use the phone number when calling from abroad.

A quick way to access the Phone book

With the display clear, press d. The first name (and phone

number) in Phone book are displayed.

7. Press M (OK). The name and phone number are stored in

Note: The names and phone numbers assigned to the speed

dial keys 1 to 9 can be speed dialled via the number keys 1

to 9 and M.

the Phone book.

Quick Save

With the display clear, key in the phone number, press b to

change the Navi key text to Saveand press M (Save).

Key in the name and press M (OK).

Setting the time

In-call options

3. Other Essential Functions

Your phone provides a number of control functions that you can

use during a call. You cannot utilise all of these functions at all

times. Only those functions which are available and enabled will

be shown in the in-call menu.

Setting the time

1. Press M (Menu) and use b to access Clockand press

M (Select).

Many of the in-call options are network services.

2. Use b to access Clock settings, press M (Select).

While you have a call in progress, press M (Options) to enter

the in-call menu. If the Navi key text is End, press c to acti-

vate the text Options.

3. Use b to scroll to Set the time and

Time:

press M (Select).

hh:mm

4. Key in the time, e.g. 0, 8, 3, 0

The following in-call options may be available:

for 8:30.

5. Press M (OK) to confirm. The time is

Holdor Unhold to hold or release a call

displayed in the right-hand corner of the display.

New Call

Answer

Reject

Swap

to make a call during an on-going call

to answer the incoming call

Note: The car phone does not contain its own battery, therefore

the setting will be lost if the voltage of the car battery is low.

to reject the incoming call

to switch between the two calls

Selecting a ringing tone

1. Press M (Menu).

End this call to end the active call

Send DTMF

Send

to send DTMF tones

2. Use b to access Tonesand press M (Select).

3. Use b to access Ringing toneand press M (Select).

to send the character string on the display to

the network

4. Use b to scroll to the ringing tone you prefer. The phone

End all calls

Phone book

to end both calls

gives you a ringing sample. Press M (OK) to select it.

to enter the Phone book

5. Press and hold c to exit the menu.

To exit the in-call menu, press c.

Voice messages

number by your service provider upon subscription to the Short

Message Service (SMS), see “2-4 Message settings” on page 24.

Voice messages

The network may offer you a voice mailbox service, which you

have to install before you can receive voice messages. After you

have installed this mailbox (refer to the user‘s guide supplied by

your service provider), you can divert your calls to the voice

mailbox and callers can leave you messages.

Make sure, before sending a text message, that the called party

is provided with the SMS feature.

Reading messages

1. When you have received an SMS message, the text ...Mes-

sages(s) Received and the ¼indicator are displayed. Press

M (Read).

The network informs you when you have a voice message wait-

ing. Call the mailbox number and listen to the message(s).

1. With clear display, press and hold 1 for a second to call

2. Use b to scroll to the desired message and

your voice mailbox.

press M (Read).

If the phone asks for the voice mailbox number, key it in and

press (OK), see “2-6 Voice mailbox number” on page 26. You

will obtain your voice mailbox number from your service pro-

vider upon subscription to the voice mailbox service.

3. While reading a message, use b to browse through the mes-

sage. Press M (Options) for available options.

Press c briefly to exit the message.

4. Press and hold c for a second to exit the menu.

2. Listen to the messages. End the call by pressing M (End).

Note: If the Navi key text Listenis available, press M

(Listen) to call your voice mailbox.

Writing and sending a message

1. Press M (Menu).

2. Use b to scroll to the menu function Messagesand press

Text messages

You can read, write and store short text messages of up to 160

M (Select).

3. Use b to access Write messages and press M (Select).

characters’ length.

Before you can send any messages, you need to store the num-

ber of your message centre in the memory of the SIM card. It

will remain unchanged until replaced. You will be allocated a

Fax and data call

4. Key in the message. For information on

how to use the keys for writing, see “Stor-

ing a name and phone number in the

Phone book” on page 13.

Fax and data call

¹ABC

159

Your radio unit supports fax and data calls. Data calls can be

used to access the Internet. For example, the radio unit may be

connected to a compatible mobile fax machine or to a compat-

ible portable computer via an RS-232 connection. The RS-232

connector supports full protocol and 9 PIN standard (TIA/EIA-

562). You have to select 19200 bps as RS-232 interface speed.

For further information, see Nokia 6090 Product Support on

www.forum.nokia.com website.

Options

5. When you have finished writing, press

M (Options).

6. Select Sendand press M (OK) or select Saveto store the

message so that it may be sent later.

7. Key in the recipient’s phone number or press M (Search)

and use b to search for it in the Phone book and press M

(OK).

The transceiver is provided with a

plastic cap to protect the data

adapter connector. Remove the

cap and then connect the car

phone to your device using any

standard 1:1 modem cable.

8. Press M (OK) to send the message.

9. Press and hold c twice to exit the menu.

Deleting messages

Warning! Keep the cap out of small children‘s reach! Always re-

move the cap whenever you may have small children in your ve-

hicle.

The storage capacity of the SIM card may vary depending on the

card. If the SIM card is full, the ¼indicator begins flashing. To

store new messages, you have to delete those messages no

longer required.

Ignition sense

1. Press M (Menu) and scroll to Messages.

2. Use b to access Inbox.

The ignition sense prevents the car phone from draining the car

battery. The ignition sense enables the car phone to be switched

on or off automatically whenever the car’s ignition is switched

on or off. However, you can switch the handset on or off at any

time via o.

3. Press M (Options) and delete the selected message.

Automatic power-off

Note: If you have selected 45 sec., you can postpone switching

off for one hour by pressing c when the message is displayed.

Automatic power-off

Automatic power-off prevents the car phone from draining the

car battery if the car phone is left on, provided the handset is

properly held in its cradle. You can set this function by selecting

the length of the automatic power-off time.

Car radio mute

This feature mutes the car radio during a phone call, or during

selecting of the ringing tones and of the volume and during SMS

signalling, provided the car radio mute cable was properly con-

nected at the time of installation.

1. Press M (Menu), use b to access the menu function

Settingsand press M (Select).

2. Use b to scroll to Phone settings and

press M (Select).

Backlight dimming

1. Press M (Menu).

3. Use b to scroll to Automatic power-off and select the op-

tion.

2. Use b to access the menu function Settingsand press

Note: If automatic power-off is disabled, the car phone don‘t

switch itself off automatically.

M (Select).

3. Use b to scroll to Phone settings and

Ignition sense is connected:

press M (Select).

If automatic power-off is set to on and the ignition is turned off,

the car phone switches itself off after the set time (45 sec. -

24 hours). The countdown time can be restarted by any user ac-

tion, i.e. key press or replacement of handset.

4. Use b to scroll to Lights and select an option:

Full brightness: Backlighting is always fully on.

Custom setting: Backlighting is adjusted to the bright-

ness of the dash lighting (provided the

cable for backlight dimming was con-

Ignition sense is not connected:

nected to a VDA-specific signal).

If automatic power-off is set to on, the car phone is switched

off within the set time after the last user action, i.e. a key press

or replacement of the handset.

Off:

Lights are always off.

Accessing the menus by scrolling

7. Press M (OK) to confirm the chosen

4-1-2-2

4. Using the Menu

setting.

Off

The car phone allows you to alter and view the settings of the

functions and options that are listed in the menus and sub-

menus.

Note: You can return to the previous menu

level by pressing c briefly or exit the

menu without changing any of the settings

by pressing and holding c.

The menus and submenus can be accessed by scrolling or by us-

ing the appropriate shortcut.

Accessing the menus by shortcut

Accessing the menus by scrolling

1. To access the menu facility, press M

The menu items (menus, submenus and setting options) are

numbered and can be accessed via their shortcut number. This

number is shown in the top right-hand corner of the display.

(Menu).

Settings

1. Press M (Menu).

4-1

2. Press b to reach the desired main menu,

Select

e.g. Settings.

2. Key in the number of the desired menu function you

wish to access quickly, i.e. within three seconds.

3. Press M (Select) to enter the menu.

4-1

Call

4. If the menu contains any submenus,

settings

For example, to set the keypad tones to off:

scroll to the desired one with b.

Press M (Menu), 9, 5, 1, M (OK).

M (Menu) to enter the menu,

9 for Tones,

Select

5. Press M (Select) to enter the sub-

4-1-2

menu (e.g. Call settings). If the menu

contains submenus, repeat steps 4 and 5.

Automatic

redial

5 for Keypad tones and

1 for keypad tones Off.

Off

Select

6. Press b to scroll to the setting of your

choice.

Press M (OK) to confirm.

List of menu functions

2 Set N ²

3 Common

1 Delivery reports

2 Reply via same centre

5 Info service

1 On

2 Off

3 Topic index

4 Topics

5 Language

6 Voice mailbox number

1 Anykey answer

2 Automatic redial

3 Speed dialling

4 Call waiting options

5 Own number sending

6 Automatic answer

7 Phone line in use (only when ALS)

2 Phone settings

1 Language

2 Cell info display

3 Welcome note

4 Network selection

5 Lights

List of menu functions

1 Phone book

1 Search

2 Service Nos.

3 Add entry

4 Erase

1 One by one

2 Erase all

5 Edit

6 Copy

7 Send entry

8 Options

1 Memory in use

2 Type of view

3 Memory status

9 Speed dials

3 Call register

1 Full brightness

2 Custom setting

3 Off

6 Automatic power-off

1 Disabled

1 Missed calls

2 Received calls

3 Dialled numbers

4 Erase recent call lists

2 45 sec.

3 1h

...

4 Settings

2 Messages

1 Call settings

1 Inbox

2 Outbox

26 24h

3 Write messages

4 Message settings

1 Set 1 ¹

7 SIM card priority

1 Radio unit SIM

2 Handset SIM

3 Security settings

1 PIN code request

2 Fixed dialling

1. The number of the settings depends

on how many settings your SIM card

offers. Each setting appears in its

own submenu and may have any

name.

2. The shortcut number of this menu

depends on the number of settings

available.

1 Message centre number

2 Messages sent as

3 Message validity

List of menu functions

3 Closed user group

4 Phone security

5 Change access codes

1 Change security code

2 Change PIN code

3 Call cost settings

1 Call costs’ limit

2 Show costs in

7 Calculator

3 Change PIN2 code

4 Restore factory settings

8 Clock

1 Alarm clock

5 Call divert

2 Clock settings

1 Show clock / Hide clock

2 Set the time

1 Divert all voice calls

without ringing

2 Divert when busy

3 Divert when not answered

4 Divert when phone off or no

coverage

3 Time format

9 Tones

1 Incoming call alert

2 Ringing tone

5 Cancel all diverts

3 Ringing volume

4 Message alert tone

5 Keypad tones

6 Call counters

1 Show call duration

1 Last call duration

2 All calls’ duration

3 Received calls’ duration

4 Dialled calls’ duration

5 Clear timers

6 Warning tones

2 Show call costs

1 Last call cost

2 All calls’ cost

3 Clear counters

1 Phone book

1-3 Storing a name and phone number in the

Phone book

In this menu Add entry, you can store phone numbers and the

1 Phone book

You can store phone numbers and their related names in the

memories of your SIM card or of your internal phone memory by

using the Phone book menu.

related names.

The car phone supports SIM cards which can store up to 250

phone numbers (of up to 30 digits) and names (of up to 16 char-

acters). The length and also the number of phone numbers and

names which can be stored in the SIM card may vary depending

on the SIM card. In addition, the internal phone memory can

store up to 150 phone numbers (of up to 30 digits each) and

names (of up to 16 characters each).

1-4 Erasing a name and phone number from the

Phone book

You can Erasephone numbers and names from the Phone book

either One by oneor by selecting Erase allif all the names

and numbers are to be erased from the Phone book at one time.

1-5 Editing a name and phone number in the

Phone book

1-1 Recalling a name and phone number from the

Phone book

In this menu, you can Editthe names and phone numbers stored

in the Phone book.

Use the menu function Searchto see if the desired name and

phone number are stored in the Phone book.

1-6 Copying the Phone book

Note: By pressing d, you can access the names and phone

numbers stored in your Phone book more quickely.

You can copy the Phone book to the additional storage compo-

nent in the phone or to another SIM card. Use From SIM card

to phoneto copy the Phone book entries one by one or all to-

gether into your phone; From phone to SIM cardcopies the

Phone book onto another SIM card.

1-2 Service numbers

If this service is provided, you can use this menu function for

easy access to the service numbers of your service provider.

1 Phone book

time), Name, number (shows one name and phone number to-

gether) or Large font (shows one name at a time).

1-7 Sending a name and phone number from

Phone book

The menu function Send entryallows you to send a person‘s

name and phone number (‘business card‘) from the Phone book

to another phone via SMS.

1-8-3 Checking the amount of free space in the Phone book

You can check how many names and phone numbers may still

be stored and are currently stored in the Phone book.

Sending the contact information

1-9 Assigning a phone number as a speed dial

number

Select Send entry, scroll to the name and number you want to

send and press M (Send). Enter the recipient‘s phone num-

ber or search in the Phone book. Press M (OK) to send the

information.

You can assign nine phone numbers stored in the Phone book as

speed dial numbers which can be dialled via the number keys

1 to 9.

Receiving the contact information

When the phone receives contact information, the text Busi-

ness card receivedis displayed. Press M (Options) to

Show, Saveor Discardthe information and press M (OK).

Specifying a speed-dialling key

Select the menu function Speed dials. If no phone number is

assigned to a key, press M (Assign).

Note: Assignis also shown when the phone has automatically

assigned a phone number from the Phone book to a speed dial-

ling key.

1-8 Options

1-8-1 Selecting the Phone book used

Select the Phone book you want to use: the one on SIM card or

the one stored in the phone.

Search for the desired name and/or phone number in the Phone

book and press M (OK) to select it.

If a phone number is assigned to a key, you can view the num-

ber, change it or erase it by first pressing M (Options).

1-8-2 Setting the type of viewing for stored names and

phone numbers

There are three different ways the phone can show the stored

phone numbers and names: Name list(shows three names at a

2 Messages

Using the speed dialling key

2-2 Outbox

Press the desired speed dialling key (1 to 9) briefly and

press M (Call) to make the call.

In the Outboxmenu, you can find those stored messages to be

sent at a later time.

Note: Pressing and holding 1 automatically calls your voice

mailbox!

2-3 Write messages

Within the Write messagesmenu, you can write and edit text

messages of up to 160 characters.

2 Messages

When you have finished writing, press M (Options) for one

of the options: Send, Send by set(sends the message by us-

ing a selected setting), Save (stores the message in the outbox

folder to be sent later) or Clear screen (removes all the char-

acters in the message).

2-1 Inbox

When you have received an SMS message, the text ...Messag-

es(s) received is displayed and the ¼indicator is on. Press

M (Read) to view the message(s). To view the message later,

enter the menu function Inbox.

2-4 Message settings

The messages in the Inboxare listed with the latest message at

the top of the list. Use b to scroll to the desired message and

press M (Read).

2-4-1 Set 1¹

A setting group or “set” is a collection of settings needed for

While reading a message, press M (Options) for available

options, and press M (OK) to select the desired option:

Erase, Reply, Edit, Use number(lists the phone number of

the sender and numbers found in the message) and Forward (to

forward the message). In the Details option, use b to see the

details of the message: the sender’s name and phone number,

the message centre used for sending and the date and time the

message was received.

sending text messages.

You can, for example, send a text message as a fax if this is sup-

ported by your service provider by simply selecting the set in

which you have defined the proper settings for fax transmis-

sions.

1. The total number of settings depends on how many settings your

SIM card offers.

2 Messages

Each set has its own submenu:

2-4-3-2 Reply via same centre

You can request the network to route the reply to your text mes-

sage via your own message centre (network service).

2-4-1-1 Message centre number

Stores the phone number of the message centre needed for

sending text messages. You obtain this number from your ser-

vice provider. Key in the phone number of the message centre

or edit the existing one and press M (OK).

2-5 Info service

This network service allows you to receive messages on various

topics (such as weather or traffic conditions) from your service

provider. For available topics and relevant topic numbers, con-

tact your service provider.

2-4-1-2 Message sent as

You can request the network to convert your text messages into

Fax, Paging or E-mail format (network service).

In order to receive a converted message, the recipient must have

an appropriate terminal device.

2-5-1 On

If you select On, you will receive messages on the active topics.

You can edit the topic list and mark the topics active or inactive.

2-4-1-3 Message validity

This network service allows you to set the length of time your

text messages are stored at the message centre while attempts

are made to deliver them.

2-5-3 Topic index

This menu retrieves a list of available topics from the network.

2-4-2 Set N

2-5-4 Topics

2-4-3 Common ¹

Here you can Add topicto the topics list. Key in the topic num-

ber and name. You can also Editor Erasethe topic list. You can

read the topics by selecting Read.

2-4-3-1 Delivery reports

You can request the network to send delivery reports on your

text messages (network service).

2-5-5 Language

Here you can select the language for the messages. Only mes-

sages in the selected language are shown.

1. The shortcut number of this menu depends on the number of sets

available.

3 Call register

2-6 Voice mailbox number

3-2 Received calls

Using the menu Voice mailbox number, you can store the num-

ber of your voice mailbox. Key in the number and press M

(OK). The number will remain unchanged until replaced. You are

assigned the number by your service provider.

The last five phone numbers from which you have received a call

are stored in the phone’s memory in the received calls list.

In the options of the Received callsmenu, you can view the

phone number, Callthe number, view the Time ofthe received

callif the clock is set to the right time, Edit numberand Save

it in the Phone book or Erasethe phone number.

3 Call register

The phone registers missed and received calls only if the net-

work supports the Calling Line Identification function, if the

phone is switched on and if it is within the network’s service

area.

3-3 Dialled numbers

The phone stores the last eight phone numbers that you called

or attempted to call.

In the options of the Dialled numbersmenu, you can view the

phone number, Callthe number, view the Time ofthe callif the

clock is set to the right time, Edit numberand Save it in the

Phone book or Erasethe phone number.

3-1 Missed calls

The last five phone numbers of the calling parties who have

tried to call you are stored in the phone’s memory in the missed

calls list.

3-4 Erasing recent call lists

In the options of the Missed callsmenu, you can view the

phone number, Callthe number, view the Time ofthe missed call

if the clock is set to the right time, Edit numberand Save it in

the Phone book or Erasethe phone number.

This menu function allows you to erase all the phone numbers

and names in the missed calls, received calls and dialled num-

bers lists.

Note: When a notice about missed calls appears on the display,

press M (List) to view the list of missed call phone numbers.

Note: If the SIM card is renewed, the contents of the missed

calls, dialled numbers and received calls lists are erased.

4 Settings

4-1-5 Own number sending

4 Settings

This network service allows you to set whether your phone num-

ber is hidden (OFF) or to be displayed (ON) to the person you are

calling. Presetresets the phone to the default setting that you

have agreed upon with your service provider. Whether your

number will be displayed to the person you are calling depends

on this agreement and the network’s ability to process the num-

ber for any particular call.

4-1 Call settings

4-1-1 Anykey answer

This menu function allows you to answer your incoming calls by

pressing any key except c and o.

4-1-2 Automatic redial

4-1-6 Automatic answer

When this menu function is set to On, your phone will make up

to ten attempts to connect the call after an unsuccessful call at-

tempt.

When this setting is On, your phone is set to automatically an-

swer an incoming call after one ring.

4-1-7 Phone line in use (only when ALS)

4-1-3 Speed dialling

Alternate Line Service is a feature of your SIM card. With this

menu, the car phone displays the currently used phone number.

When this menu function is set to On, you can apply one touch

dialling. The names and phone numbers assigned to the speed

dialling keys 2 to 9 can be dialled by pressing and holding

the corresponding number key.

4-2 Phone settings

Note: Pressing and holding 1 dials your voice mailbox num-

ber, not the speed dial number assigned to the key.

4-2-1 Language

You can select which language your phone will use for all its

display texts. If the setting Automaticis selected, the phone will

set the language according to the information contained in the

SIM card used in the phone. English is used as a default setting

if the language on the SIM card is not found in the phone.

4-1-4 Call waiting options

When this network service is activated, the network will notify

you of a new incoming call while you have a call in progress.

4 Settings

4-2-2 Cell info display

4-2-5-2 Custom settingmeans that backlighting of the car

phone is adjusted to the brightness of the dash lighting provided

the cable for backlight dimming was connected to a VDA-spe-

cific signal.

Within this menu, you can set the phone to indicate cell infor-

mation provided that the cellular network is based on Micro

Cellular Network (MCN) technology (network service).

4-2-5-3 Offmeans that the lighting remains off.

4-2-3 Welcome note

4-2-6 Automatic power-off

This menu allows you to set the message which is displayed

when the phone is switched on.

Automatic power-offprevents the car phone from draining the

car battery if the car phone is accidentally left on provided that

the handset is placed correctly in the cradle. You can set this

function to Disabledor set the length of the automatic power-

off time between 45 sec. and 24 hours. Setting this function to

Disabledmay cause your car battery to drain.

4-2-4 Network selection

The network can be selected automatically or manually. The au-

tomatic mode is set by default.

In Automaticmode, the phone automatically selects one of the

cellular networks available in your area.

4-2-7 SIM card priority

In Manualmode, the phone shows a list of available networks

and you may select the desired network if this network has a

roaming agreement with your home network operator. Other-

wise the text “No access” is displayed and another network

must be selected. The phone remains in manual mode until the

automatic mode is selected or until another SIM card is inserted

in the phone.

4-2-7-1 Radio unit SIM

The SIM card in the radio unit is assigned priority.

4-2-7-2 Handset SIM

The SIM card in the handset is assigned priority.

4-3 Security settings

Your phone is equipped with a versatile security system to pre-

vent unauthorised use of the phone or the SIM card. The codes

queried are those valid for the prioritised SIM card.

4-2-5 Lights

You can dim the lights of the display and the keypad as desired.

4-2-5-1 Full brightnessmeans that backlighting is fully on.

4 Settings

4-3-1 PIN code request

4-3-4 Phone security

Within this menu, you can set the phone to ask for the PIN code

of your SIM card when the phone is switched on. You need the

PIN code to set the request to on.

This menu allows you to set the phone security level to Onin or-

der to prevent unauthorised use of the phone. You need the se-

curity code to set the security level.

Note: Remember that some SIM cards do not allow the PIN

code request to be turned off.

If Onis selected, the phone will ask for the security code when-

ever a new SIM card is inserted.

Note: If you change the security level, all the recent calls lists

are cleared.

4-3-2 Fixed dialling

You can restrict your outgoing calls to selected phone numbers,

if this function is supported by your SIM card. To save and edit

numbers on the list, you need the PIN2 code.

4-3-5 Change access codes

With this menu, you can change the access codes: security code,

PIN code and PIN2 code of the active SIM card. These codes may

only include the characters 0 to 9. The phone prompts you to

enter the current code and the new code. It also prompts you to

verify the new code.

Note: When Fixed diallingis set to On, calls may be possible to

certain emergency numbers in some networks (e.g. 112 or other

official emergency numbers).

4-3-3 Closed user group

If you want to change the codes of the second SIM card, you

have to change the priority of the card reader, see “4-2-7 SIM

card priority” on page 28, restart the car phone and change the

codes of the second SIM card.

This network service specifies the group of people whom you

can call and who can call you. Presetresets the phone to de-

ploy any user group the SIM card owner has agreed upon with

the service provider.

Note: Avoid using access codes similar to the emergency num-

bers, such as 112, in order to prevent accidental dialling of the

emergency number.

Note:When calls are limited to closed user groups, calls may be

possible to certain emergency numbers in some networks (e.g.

112 or other official emergency numbers).

5 Call divert

4-4 Restore factory settings

6 Call counters

You can reset some of the menu settings to their original values.

The security code is needed for this function.

Note: The actual invoice for calls and services

from your service provider may vary, depending upon network

features, rounding-off for billing, taxes and so forth.

5 Call divert

The call divert network service allows you to divert the incoming

calls to your voice mailbox (only voice calls) or to another phone

number. The following call divert modes are available:

6-1 Show call duration

You can use the Show call durationmenu to view the approx-

imate duration of your outgoing and incoming calls in hours,

minutes and seconds and to reset the call timers to zero.

5-1 Divert all voice calls without ringing

5-2 Divert when busy

Inserting a new SIM card does not clear the call timers.

5-3 Divert when not answered

6-2 Show call costs

5-4 Divert when phone off or no coverage.

This network service allows you to check the approximate cost

of your last call or of all calls if the call cost service is supported

by the network. The costs are shown in terms of charging units.

Call costs are shown separately for each SIM card.

Then you can Activate, Cancelor check the Statusof the se-

lected mode. For some divert modes, Set delay is available.

5-5 With Cancel all diverts, you can set all diverts to off.

6-3 Call cost settings

Note: If Divert when busy is activated, rejecting an incoming

call will also divert the call.

6-3-1 Call costs’ limit

This network function allows you to set a cost limit for the calls

with your SIM card. You can make and receive charged calls as

long as the set call cost limit is not exceeded. The limit can be

set in a specified number of charging units or units of the cur-

rency set within the Show costs in menu.

7 Calculator

Depending on the SIM card used, you may need the PIN2 code

to set a call cost limit.

Making a currency conversion

1. Press M (Options) and select Exchange rate.

6-3-2 Show costs in

2. Choose either of the displayed options: Foreign unit ex-

pressed as domestic units or Domestic unit expressed

as foreign units.

This network function allows you to select whether the call

costs are displayed in terms of charging units or the desired cur-

rency. Contact your service provider for the charging unit prices.

3. Key in the exchange rate (press # for a decimal point) and

press M (OK).

Depending on the SIM card used, you may need the PIN2 code

to select the currency or unit in Show costs in.

4. Make the conversion: Key in the amount to be converted,

press M (Options) and select To domestic or To for-

eign.

7 Calculator

The phone is provided with a basic four-function calculator,

which can also be used for rough currency conversions.

Warning! Your phone must be switched on to use this function.

Do not switch the phone on when wireless phone use is prohib-

ited or when it may cause interference or danger.

Using the calculator

Enter the first numbers in the calculation using the 0 - 9

keys. Press # for a decimal point (.).

Press * once (+) to add, twice (-) to subtract, three times

( * ) to multiply and four times ( / ) to divide, or press M (Op-

tions) to access the desired function.

For a total, press M (Options) and select Equals using M

(OK). Press c to clear the display.

Note:This calculator has a limited accuracy and rounding errors

may occur, especially in long division.

8 Clock

In this menu, you can Show / Hide clock, Set the timeor se-

lect the 12-hour or 24-hour Time format.

8 Clock

8-1 Alarm clock

9 Tones

The phone can be set to ring as an alarm at a specified time. The

alarm clock uses the time format set for the clock: a 12-hour cy-

cle or a 24-hour cycle.

9-1 Incoming call alert

This menu function allows you to select how the phone notifies

you of an incoming call. Available options are Ringing, Ascend-

ing, Ring once, Beep once or Off if no ringing tone is to be

heard.

Note: If the phone is switched off, the alarm clock will not work.

In this menu, you can set the alarm time or select Onto change

the alarm time or Offto turn off the alarm clock.

Note: If the phone is set to Off, no ringing tone, message alert

tone, keypad tone or warning tone will be sounded.

When the set alarm time expires

The timer alert tone corresponds to the ringing volume setting.

However, only a beep is heard, if you have selected Offor Beep

once in the Tonesmenu.

9-2 Ringing tone

You can select any of the ringing tone types available in this

menu.

When the phone alarm goes off, the message Alarm! is shown

and the lights flash. If you let the phone alarm run for a minute

or if you press M (Snooze), the alarm stops for a few min-

utes and then re-sumes ringing. Press any other key to stop the

alarm.

9-3 Ringing volume

A ringing tone is set off when there is an incoming call. This

menu function allows you to select any of the ringing volume

levels available. The ringing tone volume set also affects the

volume of the message alert tone.

8-2 Clock settings

The phone is provided with a real-time clock. Since the phone

has no power backup, you may need to set the time again if the

car battery is flat or has been removed.

9 Tones

9-4 Message alert tone

You can also select an alert tone to indicate an incoming SMS

message.

9-5 Keypad tones

A tone is sounded each time a key is pressed. You can set the

keypad tone to Offor select any of the three keypad tone levels

available.

9-6 Warning tones

If this function is set to On, the notification tones of the phone

sound.

Facts about cellular transmission

Noise

5. Reference Information

Facts about cellular transmission

Your car phone employs the data transmission capabilities of

the GSM network to send faxes, short messages and e-mail and

to establish connections with remote computers.

Radio interference from electronic appliances and equipment as

well as from surrounding traffic may impact the transmission

quality.

Handover

As the car phone user moves from one network cell to another,

the signal strength of the channel drops and the cellular tele-

phone exchange may hand the user over to a different cell and

frequency where the signal is stronger. A cell handover may also

occur when the user is stationary due to varying cellular traffic

loads. Such handovers may cause slight delays.

GSM data capabilities of your car phone

- Data compression with V.42bis

- Non-transparent and transparent data transfer at 9.6kbit/s

- AT commands

(for further information, see Nokia 6090 Product Support on

www.forum.nokia.com website)

- Fax service classes 1, 2 and 2.0 and ECM (sending)

- SMS sending and receiving

Dead spots and dropouts

Dead spots are areas where radio signals cannot be received.

Dropouts occur when the car phone user passes through an area

where the radio signal is blocked or reduced by geographic or

structural obstructions.

Cellular data connections can be made from most of the loca-

tions where your car phone operates. However, we recommend

that you move the car to a location where the strongest possible

cellular signal can be obtained. When the signal is strong, data

transmission is efficient.

Low signal strength

In general, you should not expect the same performance from

cellular data communications as from line-connected commu-

nications due to the inherent characteristics of the cellular en-

vironment. The following factors may impair cellular

connections:

Due to either distance or obstacles, the radio signal strength

from a cell site may not be strong or stable enough to provide

reliable cellular connection for communication. Therefore, to

ensure the best possible communication, remember to take the

following points into consideration when using your car phone:

Access codes

The data and fax connection works best when the car is station-

ary. Attempting cellular communication while in a moving ve-

hicle is not recommended. Fax transmission is more easily

impaired than data or short message transmission.

Security code (5 digits)

The security code can be used to prevent unauthorised use of

your phone. The security code (factory setting: 12345) is usually

supplied with the phone.

Check that the cellular signal strength on the handset display is

sufficient. If the cellular signals are not strong enough to sup-

port a voice call, data connection should not be attempted until

you can find a location with better signal reception.

Change the code, see “4-3 Security settings” on page 28, and

keep the code secret and in a safe place separate from the

phone.

PIN code (4 to 8 digits)

Environmental impacts

The PIN (Personal Identification Number) code protects your

SIM card against unauthorised use. The PIN code is usually sup-

plied with the SIM card.

Your car phone works in an temperature range between -20°C

and +60°C.

Access codes

You can use the access codes described in this section to pre-

vent unauthorised use of your phone and SIM card.

PIN2 code (4 to 8 digits)

The PIN2 code, supplied with some SIM cards, is required to ac-

cess some functions, such as call cost limit. These functions are

only available if supported by your SIM card.

Your car phone may contain two different SIM cards. These

cards use different access codes. Remember to check which SIM

card is currently in use.

PUK code (8 digits)

The access codes (except PUK and PUK2 codes) can be changed

by using the menu “4-3-5 Change access codes” on page 29. If

you want to change the codes of the second SIM card, you have

to change the priority of the card reader, see “4-2-7 SIM card

priority” on page 28, restart the car phone and change the codes

of the second SIM card.

The PUK (Personal Unblocking Key) code is required to change a

blocked PIN code. The PUK code may be supplied with the SIM

card. If not, contact your local service provider for the code. If

you lose the code, contact your service provider.

Battery information

PUK2 code (8 digits)

The PUK2 code, supplied with some SIM cards, is required to

change a blocked PIN2 code. If you lose the code, contact your

service provider.

Battery information

Your radio unit does not contain its own battery. The voltage is

supplied straight from your car battery to the car phone. The car

phone works with a voltage from 10.8V to 16V.

If the voltage is higher than 16V, the car phone switches off au-

tomatically and remains off until the voltage drops to a value

within the permissible range.

If the voltage of the car battery drops lower than 10.8V, a warn-

ing appears that phone calls are not possible because of low

power. If the voltage drops below approx. 6V, the phone switch-

es off and will automatically switch on as soon as the voltage

rises again. The next time the car phone is turned on, a message

appears on the display giving the reason for the error.

Accessories

dio unit SIM reader or the data connector. For availability of

Accessories

approved accessories, please check with your dealer.

Warning! Use only accessories approved by the phone manu-

facturer for use with this particular phone model. The use of any

other types will invalidate any approval or warranty applying to

the phone, and may be dangerous.

Warning! When you disconnect the power cord of any accesso-

ry, grasp and pull the plug, not the cord.

GSM antenna

This antenna is used to connect your car phone to the wireless

GSM network. The antenna is not included in the package and has

to be purchased separately. Your Nokia dealer can advise you

about the antenna that best suits your needs. A dedicated 8W

GSM 900 antenna is recommended, combined GSM-phone/FM-

radio antennas are not, because they might not be designed for

8W output power. The frequency switch of a combined antenna

can be destroyed and the FM-radio reception quality might suffer.

6090 DIN/ISO installation kit

Data cable

This cable is used to connect your car phone to your device (e.g.

to the 9-pin serial port of a compatible portable computer or

portable fax). As this cable is a standard cable (1:1 modem ca-

ble, also called "DB9-prolongator cable" or "RS-232 modem ca-

ble") and is not included in the phone package, it can be

purchased in shops that sell accessories for computers. To en-

able a compatible computer to communicate with the phone, a

driver file can be downloaded from Nokia 6090 Product Support

on www.forum.nokia.com website, and installed in the comput-

er according to instructions provided there.

With the DIN/ISO installation kit, the Nokia 6090 is optimally

designed for easy installation in your car, either in the dash-

board or in the central console. You have easy access to the ra-

Care and Maintenance

• If the car phone is not working properly, take it to your

nearest qualified service facility. The personnel there will

assist you and, if necessary, arrange for service.

Care and Maintenance

Your car phone is a product of superior design and craftsman-

ship and should be treated with care. The suggestions below will

help you to fulfil any warranty obligations and to enjoy this

product for many years. When using your car phone or any ac-

cessory:

• Keep it and all its parts and accessories out of small chil-

dren‘s reach.

• Keep it dry. Precipitation, humidity and liquids contain miner-

als that may corrode electronic circuits.

• Do not use or store it in dusty, dirty areas. Its moving parts

can be damaged.

• Do not attempt to open it. Non-expert handling of the device

may damage it.

• Do not drop, knock or shake it. Rough handling can break

internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or strong

detergents to clean it. Wipe it with a soft cloth slightly

dampened in a mild soap-and-water solution.

• Do not paint it. Paint can clog the device’s moving parts and

prevent proper operation.

Important Safety Information

Electronic devices

Most modern electronic equipment is shielded from radio fre-

quency (RF) signals. However, certain electronic equipment may

not be shielded against the RF signals from your car phone.

Important Safety Information

Traffic safety

Do not use a handheld telephone while driving a vehicle. If using

a handheld telephone park the vehicle before conversing. Al-

ways secure the phone in its holder; do not place the phone on

the passenger seat or where it can break loose in a collision or

upon a sudden stop.

Hearing aids

Some digital wireless phones may interfere with some hearing

aids. In the event of such interference, you may want to consult

your service provider.

The use of an alert device to operate a vehicle’s lights or horn

on public roads is not permitted.

Other medical devices

Remember road safety always comes first!

Operation of any radio-transmitting equipment, including cell-

ular phones, may interfere with the functionality of inade-

quately protected medical devices. Consult a physician or the

manufacturer of the medical device to determine if your devices

are adequately shielded from external RF energy or if you should

have any questions.

Operating environment

Remember to follow any special regulations in force in any area

and always switch off your phone whenever it is forbidden to

use it, or when it may cause interference or danger.

When connecting the phone or any accessory to another device,

read its user’s guide for detailed safety instructions. Do not con-

nect incompatible products.

Switch off your car phone in health care facilities when any reg-

ulations posted in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that could be sen-

sitive to external RF energy.

As with other mobile radio transmitting equipment, users are

advised that for the satisfactory operation of the equipment and

for the safety of personnel, it is recommended that the equip-

ment should only be used in the normal operating position.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles (e.g. electronic

Important Safety Information

fuel injection systems, electronic anti-skid (anti-lock) braking

systems, electronic speed control systems, airbag systems).

powders and any other area where you would normally be ad-

vised to turn off your vehicle engine.

Check with the manufacturer or their representative regarding

your vehicle. You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Vehicles

Only qualified personnel should service or install the car phone

in a vehicle. Faulty installation or service may be dangerous and

may invalidate any warranty which may apply to the unit.

Posted facilities

Switch your car phone off in any facility where posted notices

require you to do so.

Check regularly that all car phone equipment in your vehicle is

mounted and operating properly.

Do not store or transport flammable liquids, gases or explosive

materials in the same compartment as the car phone, its parts

or accessories.

Potentially explosive atmospheres

Switch off your car phone when in any area with a potentially

explosive atmosphere and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire resulting

in bodily injury or even death.

For vehicles equipped with an airbag, remember that an airbag

inflates with great force. Do not place objects, including both

installed or portable wireless equipment in the area over the air-

bag or in the airbag deployment area. If in-vehicle wireless

equipment is improperly installed and the airbag inflates, seri-

ous injury could result.

Users are advised to switch off the car phone when at a refuel-

ling point (service station). Users are reminded of the need to

observe restrictions on the use of radio equipment in fuel depots

(fuel storage and distribution areas), chemical plants or where

blasting operations are in progress.

Failure to observe these instructions may lead to suspension or

denial of telephone services to the offender or legal action or

both.

Areas with a potentially explosive atmosphere are often, but not

always, clearly marked. They include below-deck on boats,

chemical transfer or storage facilities, vehicles using liquified

petroleum gas (such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust or metal

Important Safety Information

gency call. Consult this document and your local cellular service

provider.

Emergency calls

Important! This car phone, like any wireless phone, operates us-

ing radio signals, wireless and landline networks as well as user-

programmed functions which cannot guarantee connection in

all conditions. Therefore, you should never rely solely upon any

wireless phone for essential communications (e.g. medical

emergencies).

When making an emergency call, remember to give all the nec-

essary information as accurately as possible. Remember that

your wireless phone may be the only means of communication

at the scene of an accident - do not cut off the call until given

permission to do so.

Remember, to make or receive any calls, the car phone must be

switched on and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone net-

works or when certain network services and/or phone features

are in use. Check with local cellular service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

Some networks may require that a valid SIM card is properly

inserted in the phone.

2. Press and hold c for several seconds to ready the phone

for calls.

3. Key in the emergency number applicable for your present lo-

cation (e.g. 112 or other official emergency number). Emer-

gency numbers vary according to location.

4. Press M (Call).

If certain features are in use (Fixed dialling, etc.), you may first

need to turn those features off before you can make an emer-

Installation

The phone audio line-out has to be con-

nected to the car radio line-in. It delivers

two differencial audio signals, each one sur-

Installation

rounded by a mass. At a load impedance >

1kOhm, the nominal level is 70 mVrms, the maximum level 2000

mVrms. Check with your car radio dealer to ensure that your

specific radio line-in is compatible with your phone equipment.

Note: The SIM card and antenna represented here are not in-

cluded in the package.

Recommendations

Warning! Only qualified personnel should service the car phone

or install the car phone in a vehicle. Faulty installation or service

may be dangerous and may invalidate any warranty which may

apply to the unit.

Note: When installing the car kit in Australia and New Zealand,

the 6090 should be installed in accordance with AS/NZS 4346.

Cable connections

• Microphone installation

1. Handset

2. Handsfree microphone

3. Handsfree loudspeaker

4. 12V car battery + (with 3A fuse), 2 x red

5. 12V car battery - (with 3A fuse), 2 x black

6. Car ignition sense (with 1A fuse), blue

7. Car radio mute connector, yellow

8. Car antenna motor control, orange

9. Car backlight dimming signal, grey

10. Phone audio line-out, black cable

The recommended position for the microphone should be the

top of the A-pillar or, alternatively, near the back mirror in

the middle of the car. The microphone should be pointed in

the direction of the driver‘s mouth with a optimum distance

of 30 cm. Streams of fresh air should not be directed at the

microphone and the microphone cable should not be laid in

the ventilation system. Use the provided soft material to con-

nect the HF microphone to the A-pillar in order to avoid any

noise coupling from the car to the microphone.

Installation

• Loudspeaker installation

The best position for the RF speaker is in the lower front-seat

passenger area.

of the cable and its colour may be taken from the attached

illustration.

• GSM antenna

• Audio line out

A dedicated 8W GSM antenna is recommended. For more

information about antenna see “GSM antenna” on page 37.

Warning! In order to comply with RF exposure requirements

for mobile transmitting devices, a minimum distance of

20 cm must be maintained between the antenna and all per-

sons.

Handsfree can also be provided by using the audio line out

signal of the 6090 in combination with an appropriate FM

car radio supporting the audio line-in function which enables

use of the car loudspeaker system instead of using the deliv-

ered handsfree loudspeaker HFS-10. For good performance,

use the front loudspeaker only and adjust the volume via the

6090 handset. So that keypad and warning tones may be

audible, the external handsfree loudspeaker also has to be

installed as described above. In case the FM car radio is not

equipped with a connector for the audio line-out signal (see

picture), the connector may be removed in order that the two

wires can be directly connected to the FM car radio line-in.

Since the 6090 audio line-out provides a differential signal

instead of a +/- signal, the wires may be connected either

way.

• Connect only the 6090 handset to the system connector as

shown in the installation picture.

• When installing the radio unit, ensure a sufficient air supply

(e.g. not in a box under the carpet).

• Do not extend the system cable by any wires.

• Use only correct fuses.

• The backlight dimming line (9) requires a signal from the car

that matches VDA specifications if backlight dimming of the

phone is to be fully functional.

Warning! Don't connect the handsfree loudspeaker cable (3)

to the car radio line-in, you would damage the phone and the

car radio. Make sure you connect it only to the HFS-10 loud-

speaker provided. Do not use any other loudspeaker than the

one provided. Only the audio line-out cable provided (10)

may be connected to a car radio.

For further information, see Nokia 6090 Product Support on

www.forum.nokia.com website.

• Connection to the car battery

Take the voltage directly from the car battery and use the

cable supplied with the sales packages. This cable includes

fuses to protect the phone. If you do not so, noise may

impact the quality of the 6090 loudspeaker. The description

Glossary

cate with voice mailboxes, computerised telephony systems,

etc.

Glossary

Alternate line service (ALS)

PIN (Personal Identity Number) code

Alternate line service allows you to have two different phone

numbers, which page the same SIM card. Each of these phone

numbers can have different settings: call barrings, diverts, etc.

This is a network service which has to be subscribed to separate-

ly with your service provider. These two phone numbers are han-

dled as separate numbers in the network. They are invoiced

separately and can be used, for example, for differentiating be-

tween personal and business calls.

The PIN code protects your phone from unauthorised use. The

PIN code is supplied with the SIM card. If the PIN code request

is set to on, the code is required each time the phone is switched

on. The PIN code must be 4 to 8 digits long.

PIN2 code

The PIN2 code is supplied with some SIM cards. The PIN2 code

is required to access certain functions supported by the SIM

card. The length of the PIN2 code is 4 to 8 digits.

Car data

Car data includes data that contains the essential information

about your car. This information is required in emergency situ-

ations.

PUK (PIN Unblocking Key) code

The PUK is an 8-digit code supplied with the SIM card. The code

is required should you desire to change a disabled PIN code. If

you enter an incorrect PUK code ten times in succession, the

SIM card is rejected and you cannot make or receive any calls,

except emergency calls. If the SIM is rejected, you will need a

new SIM card.

Data centre number

This number is needed when your phone has been connected to

a laptop PC via an RS232-cable and you want to make data

calls.

You cannot change the PUK code. If you lose the code, contact

your network operator.

DTMF (Dual Tone Multi-Frequency) tones

DTMF tones are the tones you hear when you press the number

keys on the phone keypad. DTMF tones allow you to communi-

PUK2 code

The PUK2 code is supplied with some SIM cards. The code is re-

quired when you wish to change a disabled PIN2 code. If you en-

Glossary

ter an incorrect PUK2 code ten times in succession, you will not

be able to access the functions which require the PIN2 code. To

use these functions again, you will need to obtain a new SIM

card from your network operator.

Voice mailbox

A voice mailbox is a network service or a personal answering

machine where people can leave you voice messages.

You cannot change the PUK2 code. If you lose the code, contact

your network operator.

Security code

The security code is supplied with the car phone on an identifi-

cation sticker (factory setting: 12345). The security code pro-

tects your car phone against unauthorised use.

Change the code, see “4-3-5 Change access codes” on page 29,

and keep the new code secret and in a safe place, separate from

the car phone.

SIM (Subscriber Identity Module) card

The SIM card contains all the information the cellular network

needs to identify the network user. The SIM card also contains

security-related information.

The Nokia 6090 contains two SIM cards: one in the handset, a

plug-in SIM card, and a larger one in the phone unit: the IC-1

card. The cards differ solely in size.

SMSC number

Short message centre number is needed for sending of short

messages. You have to save this number in Message settings.

Index

Fax and data call . . . . . . . . . . . . . 17

Handsfree . . . . . . . . . . . . . . . . . . . 12

In-call options . . . . . . . . . . . . . . . 15

International call . . . . . . . . . . . . . 12

Making a call . . . . . . . . . . . . . . . . 12

Missed calls . . . . . . . . . . . . . . . . . . 26

Receiving a call . . . . . . . . . . . . . . . 12

Car radio mute . . . . . . . . . . . . . . . . . 18

Care and maintenance . . . . . . . . . . . 38

Clock . . . . . . . . . . . . . . . . . . . . . . . . . 32

Ala rm clo ck . . . . . . . . . . . . . . . . . . 3 2

Index

Ignition sense . . . . . . . . . . . . . . . . . . 17

In-call options . . . . . . . . . . . . . . . . . 15

Installation . . . . . . . . . . . . . . . . . . . . 42

International call . . . . . . . . . . . . . . . 12

Access Codes . . . . . . . . . . . . . . . . . . . 35

PIN code . . . . . . . . . . . . . . . . . . . . . 35

PIN2 code . . . . . . . . . . . . . . . . . . . . 35

PUK code . . . . . . . . . . . . . . . . . . . . . 35

PUK2 code . . . . . . . . . . . . . . . . . . . 36

Security code . . . . . . . . . . . . . . . 8, 35

Accessories . . . . . . . . . . . . . . . . . . . . . 37

Alarm clock . . . . . . . . . . . . . . . . . . . . 32

Antenna . . . . . . . . . . . . . . . . . . . . . . . 3 7

Anykey answer . . . . . . . . . . . . . . . . . . 27

Automatic

Keys . . . . . . . . . . . . . . . . . . . . . . . . . . 10

C key . . . . . . . . . . . . . . . . . . . . . . . 10

Navi key . . . . . . . . . . . . . . . . . . . . . 10

Scroll keys . . . . . . . . . . . . . . . . . . . 10

Labels on your car phone . . . . . . . . . . 8

Lights . . . . . . . . . . . . . . . . . . . . . . . . . 28

Data cable . . . . . . . . . . . . . . . . . . . . . 37

Display indicators . . . . . . . . . . . . . . . 11

Answer . . . . . . . . . . . . . . . . . . . . . . 27

Power-off . . . . . . . . . . . . . . . . . . . . 18

Redial . . . . . . . . . . . . . . . . . . . . . . . 27

Menu . . . . . . . . . . . . . . . . . . . . . . . . . 19

1 Phone book . . . . . . . . . . . . . . . . . 22

2 Messages . . . . . . . . . . . . . . . . . . 24

3 Call register . . . . . . . . . . . . . . . . 26

4 Settings . . . . . . . . . . . . . . . . . . . 27

5 Call divert . . . . . . . . . . . . . . . . . . 30

6 Call counters . . . . . . . . . . . . . . . 30

7 Calculator . . . . . . . . . . . . . . . . . . 31

8 Clock . . . . . . . . . . . . . . . . . . . . . . 32

9 Tones . . . . . . . . . . . . . . . . . . . . . . 32

Accessing the menu by scrolling . 19

Accessing the menu by shortcut . 19

List of menu functions . . . . . . . . . 20

Emergency call . . . . . . . . . . . . . . . . . 41

Backlight dimming . . . . . . . . . . . . . . . 18

Battery information . . . . . . . . . . . . . . 36

Facts about cellular transmission . . 34

Fax and data call . . . . . . . . . . . . . . . 17

C key . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Calculator . . . . . . . . . . . . . . . . . . . . . . 31

Call

Glossary . . . . . . . . . . . . . . . . . . . . . . . 44

GSM antenna . . . . . . . . . . . . . . . . . . 37

Counters . . . . . . . . . . . . . . . . . . . . . 30

Divert . . . . . . . . . . . . . . . . . . . . . . . 30

Emergency call . . . . . . . . . . . . . . . . 41

Handsfree mode . . . . . . . . . . . . . . . . 12

Index

Messages . . . . . . . . . . . . . . . . . . . . . . 24

Deleting messages . . . . . . . . . . . . . 17

Reading messages . . . . . . . . . . . . . 16

Text messages . . . . . . . . . . . . . . . . 16

Voice messages . . . . . . . . . . . . . . . 16

Writing and sending messages . . . 16

Safety information . . . . . . . . . . . . 7, 39

Scrolling . . . . . . . . . . . . . . . . . . . . . . 10

Security code . . . . . . . . . . . . . . . . . . 35

Settings . . . . . . . . . . . . . . . . . . . . . . . 27

Signal strength . . . . . . . . . . . . . . . . . 11

SIM card . . . . . . . . . . . . . . . . . . . . . . . 9

Inserting a SIM card . . . . . . . . . . . . 9

Priority . . . . . . . . . . . . . . . . . . . . . . 28

Speed dialling . . . . . . . . . . . . . . . . . . 23

Navi key . . . . . . . . . . . . . . . . . . . . . . . 10

One touch dialling . . . . . . . . . . . . . . . 27

Text m essa ges . . . . . . . . . . . . . . . . . . 1 6

Time

Phone book . . . . . . . . . . . . . . . . . . . . . 22

Making a call using

Clock . . . . . . . . . . . . . . . . . . . . . . . 32

Setting of the time . . . . . . . . . . . . 15

Tones . . . . . . . . . . . . . . . . . . . . . . . . . 32

Selecting of the ringing tone . . . . 15

the Phone book . . . . . . . . . . . . . . . 14

Quick save . . . . . . . . . . . . . . . . . . . . 14

Storing in the Phone book . . . . . . . 13

PIN code . . . . . . . . . . . . . . . . . . . . . . . 35

PIN2 code . . . . . . . . . . . . . . . . . . . . . . 35

PUK code . . . . . . . . . . . . . . . . . . . . . . 35

PUK2 code . . . . . . . . . . . . . . . . . . . . . 36

Using this guide . . . . . . . . . . . . . . . . . 8

Voice mailbox . . . . . . . . . . . . . . . . . . 26

Voice messages . . . . . . . . . . . . . . . . 16

Volume . . . . . . . . . . . . . . . . . . . . . . . 13

Radio unit . . . . . . . . . . . . . . . . . . . . . . . 9

Redialling . . . . . . . . . . . . . . . . . . . . . . 13

Reference information . . . . . . . . . . . 34

Ringing tone . . . . . . . . . . . . . . . . . . . . 32

Warranty . . . . . . . . . . . . . . . . . . . . . . 48

Limited Manufacturer’s Warranty

5. This limited warranty will not cover painted covers or other similar

personalized parts. In all cases that require unlocking or locking of an

operator SIM-lock, Nokia will first direct the Customer to such operator

for unlocking or locking of the operator SIM-lock before repairing or

replacing the Product.

Limited Manufacturer’s Warranty

Part of Europe & Africa Region

This limited warranty shall apply in part of Nokia Mobile Phones’

Europe & Africa Region unless a local warranty exists. Nokia Mobile

Phones Ltd ("Nokia") warrants that this NOKIA product ("Product") is at

the time of its original purchase free of defects in materials, design and

workmanship subject to the following terms and conditions:

6. This limited warranty shall not apply to deteriorations due to normal

wear and tear. This limited warranty shall further not apply if:

(i) The defect was caused by the fact that the Product has been sub-

jected to: use in contradiction with the owner's/user manual, rough

handling, exposure to moisture, dampness or extreme thermal or envi-

ronmental conditions or rapid changes in such conditions, corrosion,

oxidation, unauthorized modifications or connections, unauthorized

opening or repair, repair by use of unauthorized spare parts, misuse,

improper installation, accident, forces of nature, spillage of food or liq-

uid, influence from chemical products or other acts beyond the reason-

able control of Nokia (including but not limited to deficiencies in

consumable parts, such as batteries which all by their nature have a

limited lifetime, and breakage or damage to antennas) unless the de-

fect was caused directly by defects in materials, design or workman-

ship;

1. This limited warranty is given to the end-purchaser of the Product

("Customer"). It shall neither exclude nor limit i) any mandatory statu-

tory rights of the Customer or ii) any of the Customer’s rights against

the seller/dealer of the Product.

2. The warranty period is twelve (12) months from the date on which

the first Customer purchased the Product. In case of a subsequent pur-

chase or other change of owner/user, such warranty period shall con-

tinue for the remaining part of the twelve (12) month period and

otherwise remain unaffected. This limited warranty is only valid and

enforceable in the following countries: Bosnia, Bulgaria, Croatia, Cy-

prus, the Czech Republic, Estonia, any member state of the European

Union, Hungary, Iceland, Israel, Latvia, Lithuania, Macedonia, Malta,

Norway, Poland, Romania, the Slovak Republic, Slovenia, Switzerland

and Turkey.

(ii) Nokia or its authorized service company was not notified by the

Customer of the defect within thirty (30) days after the appearance of

the defect within the warranty period;

3. During the warranty period Nokia or its authorized service company

will repair or replace, at Nokia’s sole discretion, a defective Product.

Nokia will return the repaired Product or another Product to the Cus-

tomer in good working condition. All parts or other equipment for

which replacements have been provided shall become the property of

Nokia.

(iii) the Product was not returned to Nokia or its authorized service

company within thirty (30) days after the appearance of the defect

within the warranty period;

(iv) the Product serial number, the accessory date code or the IMEI

number has been removed, erased, defaced, altered or is illegible;

(v) the defect was caused by a defective function of the cellular net-

work;

4. A repaired or replaced Product will not be given a prolonged or re-

newed warranty period.

Limited Manufacturer’s Warranty

(vi) the defect was caused by the fact that the Product was used with

or connected to an accessory not manufactured and supplied by Nokia

or used in other than its intended use;

WARRANTY CARD

Purchaser’s Name:

FILL IN WITH BLOCK LETTERS

(vii) the defect was caused by the fact that the battery was short-

circuited or seals of the battery enclosure or cells were broken or show

evidence of tampering or the battery was used in equipment other than

for which it has been specified; or

______________________________________________________

Address:

______________________________________________________

Country:

(viii) the Product software needs to be upgraded due to changes in cel-

lular network parameters.

7. To claim this limited warranty, the Customer shall present either i) a

legible and non-modified original warranty card which clearly indicates

the name and address of the seller, the date and place of purchase, the

product type and the IMEI or other serial number or alternatively ii) a

legible and non-modified original purchase receipt which contains the

same information, if such purchase receipt is presented to the seller/

dealer of the Product.

______________________________________________________

Phone:

______________________________________________________

Date of Purchase (dd/mm/yy):

_____ / _____ / _____

Product Type (on phone type label): _______ - _______

Product Model (on phone type label): ___________

Phone Serial No (on phone type label):_______ / ___ / _______ / __

Place of Purchase:

8. This limited warranty is the Customer’s sole and exclusive remedy

against Nokia and Nokia’s sole and exclusive liability against the Cus-

tomer for defects or malfunctions of the Product. This limited warranty

replaces all other warranties and liabilities, whether oral, written, (non-

mandatory) statutory, contractual, in tort or otherwise. Nokia is in no

event liable for any incidental, consequential or indirect damage, costs

or expenses. Neither is Nokia in any event liable for any direct damage,

costs or expenses, if the Customer is a legal person.

______________________________________________________

Store Name:

9. Any change or amendment to this limited warranty requires Nokia’s

prior written consent.

______________________________________________________

Store Address:

______________________________________________________

Stamp

Manhattan Computer Products 179133 User Manual
LG Electronics KG320S User Manual
Kingston Technology Computer Drive DT4000 User Manual
JVC KD SX909R User Manual
JVC KD S51 User Manual
IBM 2 User Manual
Huawei Technologies Cell Phone U8800 51 User Manual
Emerson GP815 User Manual
Dell POWEREDGE RADI H700 User Manual
2nd Ave Macintosh OS X User Manual