User Guide
Guide d'utilisation
Nokia 6265i User Guide
Remarque: La version française du guide se trouve à la page 119.
1
Part No. 9243339, Issue No. 1
Copyright ©2006 Nokia. All rights reserved.
Nokia, Nokia Connecting People, Nokia 6265i, Pop-Port, and the Nokia Original
Enhancements logos are trademarks or registered trademarks of Nokia Corporation. Other
company and product names mentioned herein may be trademarks or trade names of their
respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
©1999-2006. Tegic Communications, Inc. All rights reserved.
Bluetooth wireless technology is a registered trademark of Bluetooth SIG, Inc.
miniSD is a registered trademark of the SD Card Association.
Includes RSA BSAFE cryptographic or security protocol software from
RSA Security.
Java is a trademark of Sun Microsystems, Inc.
The information contained in this user guide was written for the Nokia 6265i product. Nokia
operates a policy of ongoing development. Nokia reserves the right to make changes to any
of the products described in this document without prior notice.
UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR
INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED. THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT
AS REQUIRED BY APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND
RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
EXPORT CONTROLS
This device may contain commodities, technology, or software subject to export laws and
regulations from the U.S. and other countries. Diversion contrary to law is prohibited.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close
proximity to receiving equipment). The FCC or Industry Canada can require you to stop using your
telephone if such interference cannot be eliminated. If you require assistance, contact your local
service facility. This device complies with part 15 of the FCC rules. Operation is subject to the
condition that this device does not cause harmful interference. Any changes or modifications not
expressly approved by Nokia could void the user’s authority to operate this equipment.
2
C o n t e n t s
Contents
For your safety..................................................................................... 4
Welcome............................................................................................... 7
1. Phone at a glance.......................................................................... 8
2. Set up your phone....................................................................... 14
3. Text entry..................................................................................... 21
4. Contacts....................................................................................... 24
5. Call History.................................................................................. 32
6. Messaging.................................................................................... 35
7. Wireless Web............................................................................... 50
8. My Albums................................................................................... 52
9. Shop ............................................................................................. 54
10. Media ........................................................................................... 55
11. Settings........................................................................................ 61
12. Games & Apps............................................................................. 85
13. Camera ......................................................................................... 86
14. Tools............................................................................................. 91
15. PC connectivity.......................................................................... 102
16. Enhancements............................................................................ 103
17. Reference information.............................................................. 104
Care and maintenance..................................................................... 107
Additional safety information........................................................ 108
Index.................................................................................................. 114
3
F o r y o u r s a f e t y
For your safety
Read these simple guidelines. Not following them may be dangerous or illegal.
Read the complete user guide for further information.
Switch on safely
Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
Road safety comes first
Obey all local laws. Always keep your hands free to operate the
vehicle while driving. Your first consideration while driving should be
road safety.
Interference
All wireless phones may be susceptible to interference, which could
affect performance.
Switch off in hospitals
Follow any restrictions. Switch the phone off near medical equipment.
Switch off in aircraft
Follow any restrictions. Wireless devices can cause interference
in aircraft.
Switch off when refueling
Do not use the phone at a refueling point. Do not use near fuel
or chemicals.
Switch off near blasting
Follow any restrictions. Do not use the phone where blasting is
in progress.
Use sensibly
Use only in the normal position as explained in the product
documentation. Do not touch the antenna unnecessarily.
Qualified service
Only qualified personnel may install or repair this product.
4
F o r y o u r s a f e t y
Enhancements and batteries
Use only approved enhancements and batteries. Do not connect
incompatible products.
Water-resistance
Your phone is not water-resistant. Keep it dry.
Backup copies
Remember to make back-up copies or keep a written record of all
important information stored in your phone.
Connecting to other devices
When connecting to any other device, read its user guide for detailed
safety instructions. Do not connect incompatible products.
Emergency calls
Ensure the phone is switched on and in service. Press the end key as
many times as needed to clear the display and return to the start
screen. Enter the emergency number, then press the call key. Give
your location. Do not end the call until given permission to do so.
■ About your device
The wireless device described in this guide is approved for use on the CDMA 800
and 1900, AMPS 800, and GPS networks. Contact your service provider for more
information about networks.
When using the features in this device, obey all laws and respect privacy and
legitimate rights of others.
When taking and using images or video clips, obey all laws and respect local customs
as well as privacy and legitimate rights of others.
Warning: To use any features in this device, other than the alarm clock,
the device must be switched on. Do not switch the device on when
wireless device use may cause interference or danger.
5
F o r y o u r s a f e t y
■ Network services
To use the phone you must have service from a wireless service provider. Many of
the features in this device depend on features in the wireless network to function.
These network services may not be available on all networks or you may have to
make specific arrangements with your service provider before you can utilize network
services. Your service provider may need to give you additional instructions for
their use and explain what charges will apply. Some networks may have limitations
that affect how you can use network services. For instance, some networks may
not support all language-dependent characters and services.
Your service provider may have requested that certain features be disabled or not
activated in your device. If so, they will not appear on your device menu. Your
device may also have been specially configured. This configuration may include
changes in menu names, menu order and icons. Contact your service provider for
more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP
protocols. Some features of this device, such as Shop require network support
for these technologies.
■ Shared memory
The following features in this device may share memory: Messaging, Contacts, My
albums, Tools, and Games & Apps. Use of one or more of these features may reduce
the memory available for the remaining features sharing memory. For example,
saving many photos to the My albums may use all of the available memory. Your
device may display a message that the memory is full when you try to use a shared
memory feature. In this case, delete some of the information or entries stored in the
shared memory features before continuing. Some of the features, such as Messaging
and Contacts, may have a certain amount of memory specially allotted to them in
addition to the memory shared with other features.
6
W e l c o m e
Welcome
Congratulations on your purchase of the Nokia 6265i mobile phone. Your phone
provides many functions which are practical for daily use, such as a hands-free
loudspeaker, camera, MP3 player, video recorder, and more. Your phone can also
connect to a PC, laptop, or other device using a USB data cable, Bluetooth wireless
technology, or infrared.
■ Register your phone
1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better if
■ Getting help
Find your phone label
If you need help, the Nokia Care
Contact Center is available for
assistance. Before calling, we
recommend that you write down
the following information and have
it available:
•
•
Electronic serial number (ESN)
Your zip code (only in the US)
The ESN is found on the type label, which is located beneath the battery on the
back of the phone. See "Remove the back cover," p. 15 and "Remove the battery,"
p. 15 for more information.
Accessibility solutions
Nokia is committed to making mobile phones easy to use for all individuals,
including those with disabilities. For more information visit the Web site at
7
P h o n e a t
a
g l a n c e
1. Phone at a glance
■ Keys and parts
miniSD card slot (1)
Earpiece (2)
Center selection and scroll key (12)
Keypad (13)
Display (3)
Microphone (14)
Headset connector (4)
LED indicator (5)
Left selection key (6)
Right selection key (7)
Call key (8)
Charger port (15)
Pop-Port™ connector (16)
Camera key (17)
Camera flash and self-portrait mirror (18)
Loudspeaker (19)
End and power key (9)
Infrared (10)
Volume key (20)
Camera lens (21)
Strap holder (11)
8
P h o n e a t
a
g l a n c e
■ Standby mode
Depending on your wireless service provider and the model number of your phone,
some or all of the following selection keys may appear in the standby mode.
The standby mode indicates your
phone is idle.
Signal strength (1)—More bars
indicate a stronger network signal.
Menu (2)—Press the center selection
key to select this option.
Go to (3)—Press the left selection key
to select this option.
Shop (4)—Press the right selection
key to select this option.
Battery level (5)—A filled in battery
indicates more power.
■ Quick keys
Depending on your wireless service provider and the model number of your
phone, some or all of the following scroll key shortcuts may be available in
the standby mode.
In the standby mode, the four-way scroll and center selection keys instantly take
you to frequently-accessed menus:
Scroll up key—Go to Messaging.
Scroll right key—Go to the Nokia Music Player.
Scroll down key—Go to the contacts list.
Scroll left key—Open the minibrowser.
Center selection key—Displays available applications or selects highlighted
menus and submenus.
9
P h o n e a t
a
g l a n c e
■ Indicators and icons
Depending on your wireless service provider and the model number of your phone,
some or all of the following indicators and icons may appear on the start screen.
Icon
Indicates...
You have one or more text or picture messages.
See "Read and reply to text messages," p. 36.
You have one or more voice messages.
See "Voice messages," p. 47.
Your phone keypad is locked. See "Keyguard," p. 20.
Your phone is set to the silent profile. See "Profiles," p. 61.
The alarm clock is on. See "Alarm clock," p. 91.
The countdown timer is running.
See "Countdown timer," p. 100.
The stopwatch timing is running in the background.
See "Stopwatch," p. 100.
Integrated hands free or loudspeaker is active.
The timed profile is selected. See "Profiles," p. 61.
Phone can be connected to a Bluetooth wireless
technology device. See "Bluetooth connectivity," p. 72.
,
,
,
An enhancement, such as headset, handsfree, hearing aid,
TTY/TTD, or loopset is active or connected.
See "Enhancement settings," p. 77.
, or
or
Voice privacy encryption is active or inactive in the network.
Phone is roaming outside of your home network.
Phone is in a digital network. See "Network services," p. 6.
Phone is in a 1XRTT network. See "Network services," p. 6.
10
P h o n e a t
a
g l a n c e
■ Phone menus
Phone features are grouped according to function and are accessed through the
main menus. Each main menu contains submenus and lists from which you can
select or view items and customize your phone features. You can access these
menus and submenus by using the scroll method or by using a shortcut.
Note: Some features may not be available, depending on your network.
For more information, contact your wireless provider.
Scroll method
1. In the standby mode, select Menu using the center selection
key. Scroll through the main menu using the scroll key.
On the right side of the screen, a scroll bar is displayed with a
tab that moves up or down as you move through the menus.
This provides a visual representation of your current position
in the menu structure.
2. When you arrive at a menu, press Select (the center selection key) to
enter submenus.
Select Back from the submenu level to return to the previous menu.
Press the end key to return to the standby mode from any menu or submenu.
Main menu display
You can control whether your phone main menu is displayed as a List, Grid or Grid
with labels. By default, the main menu displays in Grid with labels format.
In the standby mode, select Menu > Options > Main menu view > List, Grid, or
Grid with labels.
If supported by your wireless service provider, you can also change the order of
menus in your main menu.
In the standby mode, select Menu > Options > Organize. Highlight a menu, select
Move. Use the scroll key to move the menu to a new location, select OK. You can
repeat this procedure to customize your main menu.
Select Done > Yes to save the changes.
In-phone help
Many features have brief descriptions (help text) that can be viewed on the display.
To view these descriptions, scroll to a feature, and wait for about 15 seconds.
Scroll down to view all of the description, or select Back to exit.
In order to view the descriptions, you must activate help text.
In the standby mode, select Menu > Settings > Phone > Help text activation >
On or Off.
11
P h o n e a t
a
g l a n c e
■ Security functions
The security feature protects your device from unauthorized outgoing calls or denies
access to the stored information with a lock or security code. The lock code is a four-
digit number, while the security code is a five-digit number. By default, the security
feature uses the lock code (defaulted to the last four digits of your phone number),
instead of the security code to protect your phone.
You must enter your lock code to access the Security menu.
To access the Security menu, do the following:
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK. See "Security," p. 79 for more information.
Note: Depending on your wireless service provider, the preset lock code
may be 1234 or 0000 instead of the last four digits of your phone number.
If none of these work, contact your wireless service provider for more help.
To enter the lock code to restore the factory settings, do the following:
1. In the standby mode, select Menu > Settings > Restore factory sett.
2. Enter the lock code, and select OK.
Note: Depending on your wireless service provider, your phone may ask
for the security code (defaulted to 12345) instead of the lock code.
Note: If you enter the wrong lock code five times in succession, your
phone will not accept your current lock code for 5 minutes. This occurs
even if when you power down the phone between incorrect attempts.
■ Go to functions
The Go to menu allows you to change the function of the left selection key on
your phone so that your most frequently used functions can be quickly accessed
from the Go to menu in the standby mode.
Select options
1. In the standby mode, select Go to > Options > Select options.
2. Scroll to the options you want to add.
3. Select Mark to add an option or Unmark to remove an option.
4. Select Done when you have added all desired options.
5. Select Yes to save the changes.
6. In the standby mode, select Go to to display a list of the options that you
selected in step 3.
12
P h o n e a t
a
g l a n c e
Organize functions
In the standby mode, select Go to > Options > Organize. Highlight an option, and
select Move. Scroll to move the option to a new location, and select OK. You can
repeat this procedure to customize your Go to menu.
Select Done > Yes to save the changes.
13
S e t u p y o u r p h o n e
2. Set up your phone
■ Antenna
Your device has an internal antenna.
Hold the device as you would any other
telephone with the antenna area pointed
up and over your shoulder.
Note: As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the device is switched on. Contact with
the antenna affects call quality and may cause
the device to operate at a higher power level
than otherwise needed. Avoiding contact with
the antenna area when operating the device
optimizes the antenna performance and the
battery life.
■ Battery
Always switch off the power and disconnect the charger before removing the battery.
Avoid touching electronic components while changing the covers. Always store
and use the device with the covers attached.
Prolonged, continuous use of your device may increase the device temperature.
The increased temperature is a normal function of this product and does not pose
a safety concern for you or the device. If the temperature is uncomfortable to
you, use a headset or allow your device to return to room temperature before
your next call.
14
S e t u p y o u r p h o n e
Remove the back cover
1. With the back of the phone
facing you, press down and
hold the back cover latch.
2. Slide the back cover toward the
bottom of the phone, lift up
and remove.
Remove the battery
After you have removed the back
cover, insert your finger into the
finger grip, and lift the battery
from its compartment.
UIM (CDMA SIM) card slot
Your phone has a UIM card slot built into the mechanics. However, the UIM is not
functional in this phone model. Avoid placing anything into the UIM card slot.
Replace the battery
1. Insert the battery, goldcolored
contact end first, into the
battery slot.
2. Push down on the other end of
the battery to snap the battery
into place.
Replace the back cover
1. Set the back cover on the phone
with the cover tabs aligned with
the slots in the phone.
2. Press the back cover latch
down and slide the back cover
toward the top of phone.
3. Make sure back cover latch
is secure.
15
S e t u p y o u r p h o n e
Charge the battery
1. Plug the charger transformer into a standard ac outlet.
2. Insert the charger
output plug into
the round jack at
the bottom end of
the phone.
If necessary, you can
use a CA-44 adapter
cable (1) to connect a
charger and the phone.
After a few seconds,
the battery indicator
in the display scrolls.
If the battery is
completelydischarged,
it may take a few
minutes before the
charging indicator
appears on the display or before any calls can be made.
■ MiniSD card
To insert the miniSD, complete the following steps.
1. Slide open the phone and lift open the miniSD
slot cover.
2. Insert card firmly as shown in the illustration.
The card clicks into place.
To remove miniSD card, firmly press the card until it
releases from card slot and slides out.
Important: Do not remove the memory card
while reading or writing to the card. Doing
so may cause data corruption on the card or
the phone.
Note: Use only miniSD cards approved by
Nokia for use with this device. Nokia utilizes the approved industry
standards for memory cards but not all other brands may function
correctly or be fully compatible with this device.
16
S e t u p y o u r p h o n e
■ Turn your phone on or off
1. To turn your phone on or off, press and hold the
end key for at least 3 seconds.
2. Enter the lock code, if necessary, and select OK.
■ Connect the headset
A compatible headset, such as HS-5, may
be purchased with your phone or separately
as an enhancement. See "Enhancement
settings," p. 77 for information.
1. Plug the headset connector into the
Pop-Port™ connector at the bottom
end of your phone.
the display.
appears on
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
•
•
•
Use the keypad to enter numbers.
Press the call key to place a call.
Press the end key to end a call.
You can also plug a compatible headset, the such as the HS-9 Universal Headset,
into the 2.5 mm stereo headset jack on the side of your phone to allow hands-
free operation. See "Enhancement settings," p. 77.
Warning: When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your safety.
■ Make calls
Using the keypad
1. Enter the phone number (including the area code), and press the call key.
To delete a character to the left of the cursor, select Clear.
2. To end the call, press the end key. To cancel the call attempt, select End call.
Use the save contact option
1. In the standby mode, enter the phone number (including the area code) and
select Save, enter a name for the contact, and select OK.
2. To make the call, press the call key. To return to standby mode, select Done.
17
S e t u p y o u r p h o n e
Use the contacts list
1. In the standby mode, scroll down to display your contacts.
2. Scroll to the contact you wish to dial, press the call key. To view details of the
entry, select Details.
Use the last dialed number
1. In the standby mode, press the call key to display the last 30 numbers dialed.
2. Scroll to the number or name you wish to redial, and press the call key.
Make a conference call
Conference calling is a network service that allows you to take part in a
conference call with two other participants.
1. Make a call to the first participant.
2. With the first participant on the line, select Options > New call.
3. Enter the phone number of the second participant; or, to retrieve a number
from your contacts, select Search and the number you want to call.
4. Press the call key. The first participant is put on hold.
5. When the second participant picks up, press the call key to connect the calls.
6. To end the conference call, select Options > End all calls, or press the end key.
■ Answer calls
Answer or silence an incoming call
1. To answer the call, press the call key or select Answer.
2. To reject the call, press the end key.
Select Silence to mute the ringing tone. Select Dismiss or do nothing, and the
call is eventually forwarded to voice mail.
If your phone is set to Silent in the Profiles menu, select Dismiss, and the call
is forwarded to voice mail.
Adjust the earpiece volume
Press the up arrow or down arrow on the volume key located on the right side of
your phone to adjust the volume of the earpiece.
When adjusting the volume, a bar chart appears in the display indicating the
volume level.
18
S e t u p y o u r p h o n e
Answer a call with the keypad locked
To answer a call with the keypad locked, simply press the call key or select Answer.
During the call, all features function as normal. When you end or reject the call,
the keypad automatically relocks. See "Keyguard," p. 20 for details.
When the device is locked, calls may be possible to the official emergency number
programmed into your device.
Use the loudspeaker
Warning: Do not hold the device near your ear when the loudspeaker is
in use because the volume may be extremely loud.
You can use your phone loudspeaker during a call:
•
•
To activate the loudspeaker, select Loudsp.
To deactivate the loudspeaker, select Handset.
The loudspeaker is deactivated automatically when a call or a call attempt ends
or when certain enhancements are connected.
Mute phone during call
To mute your phone during a call, select Mute; to unmute the phone, select Unmute.
Options during a call
Many of the options that you can use during a call, are network services.
Check with your wireless service provider for more information.
During a call, select Options and one of the following:
Loudspeaker or Handset—Activate or deactivate the loudspeaker while in a call.
New call—Initiate a conference call. See "Make a conference call," p. 18
for information.
Save—Save a number entered during a call.
Add to contact—Add a number entered during a call to a contact in your list.
End all calls—Disconnect from all active calls.
Touch tones—Enter the numbers, and select Tones to send the numbers as tones.
Contacts—View the contacts list.
Menu—View the phone menu.
19
S e t u p y o u r p h o n e
■ Keyguard
With keyguard, you can lock the keypad to prevent keys from being pressed
accidentally. Remember to lock your phone keypad to prevent accidental calls.
If the keypad is locked, it unlocks when you receive a call. After the call, the lock
automatically reactivates.
When the keyguard is on, calls may be possible to the official emergency number
programmed into your device.
•
To lock the keypad when the phone slide is open, select Menu, and press *
within 2 seconds.
To lock the keypad when the phone slide is closed, open the slide, close it,
and select Lock.
•
To unlock the keypad when the phone slide is open, select Unlock, and press *
within 2 seconds.
To unlock the keypad when the phone slide is closed, open the slide or select
Unlock > OK.
20
T e x t e n t r y
3. Text entry
You can use two methods for entering text and numbers: standard mode and
predictive text mode.
■ Standard mode
Standard mode is the only way to enter text into the contacts list, and to rename
caller groups.
Text (Abc)
•
Press a key once to insert the first letter on the key, twice for the second
letter, etc. If you pause briefly, the last letter in the display is accepted and
your phone awaits the next entry.
•
•
Press 0 to enter a space, thereby accepting a completed word.
Press 1 as many times as necessary to scroll through a list of commonly
used characters.
•
•
Press * to display a complete list of special characters.
Press and hold # to open Editor settings > Number mode, Dictionary on or
Dictionary off, or Writing language.
Numbers (123)
To switch to 123 mode from Abc mode, press and hold # at any message entry
screen to bring up the Editor settings menu list of Number mode, Dictionary on or
Dictionary off, and Writing language. Select Number mode, and the device returns
to the message entry screen and switches the ABC icon in the upper left corner of
the display to the 123 icon (or back). To return to Abc mode, press and hold #.
Change language
To change the language, do the following:
1. Press and hold #.
2. At the Editor settings menu list, select Writing language, and the new language.
The phone will return to the message entry screen, and you can compose in the
new language.
21
T e x t e n t r y
Punctuation and special characters
While at any text entry screen, press * to display special characters (press and
hold * if predictive text is on). Press * again to cycle through all available
characters. Scroll to navigate through the list of special characters. Once a
character is highlighted, select Insert to insert the character into your message.
■ Predictive text mode
Predictive text input allows you to write messages quickly using your keypad and
the built-in dictionary. It is much faster than the standard mode method, because
for each letter, you only press the corresponding key on your keypad once.
Activate and deactivate
At any text entry screen, select and hold Options to turn predictive text on or off
depending on previous mode; or, select Options > Dictionary on or Dictionary off.
Press # twice to change from predictive text mode to standard mode and back.
Enter text
The illustration below simulates your display each time a key is pressed. For
example, to write Nokia with predictive text on and with the English dictionary
selected, press each of the following keys once:
•
•
Press 0 to enter a space and begin writing the next word.
If a displayed word is not correct, press * to see other matches. To return to
the previous word in the list of matches, select Previous.
•
If ? appears after a word, it is not in the dictionary. Select Spell to add the
word to the dictionary.
•
•
Press 1 to insert a period into your message.
Press and hold * to display special characters. Press * again to cycle through
all available characters.
•
•
Press and hold the specific number key to enter a number.
Press and hold # to bring up the Editor settings menu list of Number mode,
Dictionary on or Dictionary off, and Writing language.
22
T e x t e n t r y
■ Change case and mode
Press # to switch between uppercase, lowercase, and sentence case, as well as
standard and predictive text modes. Case and mode are indicated by the following
icons that appear in the upper left of the display screen.
Uppercase text: standard mode is on.
Lowercase text: standard mode is on.
Sentence case text: standard mode is on.
Only available at the beginning of a sentence.
Uppercase text: predictive text is on.
Lowercase text: predictive text is on.
Sentence case text: predictive text is on.
Only available at the beginning of a sentence.
■ Delete text
To delete text, use one of the following options:
•
•
Select Clear to backspace the cursor and delete a character.
Select and hold Clear to backspace continuously and delete characters.
23
C o n t a c t s
4. Contacts
The contacts list can hold up to 500 contacts with multiple numbers and text notes
for each contact. The amount of numbers and text entries that you can save may
vary, depending on length and the total number of entries in the contacts list.
In the standby mode, select Menu > Contacts and from the following options:
Names—List of contacts currently on your phone.
Settings—Change your contact settings.
Caller groups—Assign contacts to caller groups.
Voice tags—Assign voice commands to phone numbers.
1-touch dialing—Assign specific keys to phone numbers.
My number—Shows the current number assigned to the phone.
Delete all contacts—Delete all contacts on your phone.
To quickly access your contacts scroll down while in the standby mode.
■ View contacts
In the standby mode, select Menu > Contacts > Names or scroll down to see your
current list of contacts. While viewing your contact list, you can select Details for
the contact information or Options and one of the following:
Search—Search your contacts.
Add new contact—Add a new contact.
Delete contact—Delete the highlighted contact.
To make a call, highlight a contact, and select Call.
■ Search contacts
In the standby mode, select Menu > Contacts > Names > Options > Search. Enter
the first character of the contact name, and highlight the contact you wish to view.
■ Add new contacts
Save a name and number
1. In the standby mode, enter the phone number you wish to save.
2. Select Save.
24
C o n t a c t s
3. Enter the name, and select OK > Done.
When you enter a number, you can enter pause and wait codes into your dialing
string. See "Insert dialing codes," p. 25.
Save a number (only)
1. In the standby mode, enter the phone number you wish to save.
2. Select and hold Options.
Save a contact
1. In the standby mode, select Menu > Contacts > Names > Options >
Add new contact.
2. Enter the name, and select OK.
3. Enter the phone number, and select OK.
Insert dialing codes
You can insert special characters called dialing codes into phone numbers such
as voice mail, and save the number to a speed dial location. Dialing codes instruct
the receiving system to pause, wait, bypass, or accept the numbers that follow
them in the dialing string.
You can automate voice mail with dialing codes. For more information, see
"Automate voice mail," p. 48.
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
Dialing code Indicates...
Bypasses a set of instructions.
*
Causes the international access code to be replaced by +.
Pauses for 2.5 seconds before sending any numbers that follow.
+
p
w
Waits for you to press the call key before sending the numbers
or codes that follow.
25
C o n t a c t s
Save multiple numbers
You can save different types of phone numbers per contact. The first number you
save for any entry is automatically set as the default, but the default number can
always be changed.
1. In the standby mode, scroll down to display your list of contacts.
2. Select the contact to which you want to add a phone number.
3. Select Details > Options > Add detail > Number > General, Mobile, Home,
Work, or Fax.
4. Enter the phone number, and select OK.
If you want to change the number type, highlight the number and select
Details > Options > Change type > General, Mobile, Home, Work, or Fax.
Save other details
To add an address or note an existing contact, do the following:
1. In the standby mode, scroll down to display your list of contacts.
2. Scroll to the contact to which you want to add an address or note.
3. Select Details > Options > Add detail > E-mail address, Web address,
Street address or Note.
4. Enter the text for the note or address, and select OK.
To associate an image or tone to an existing contact, do the following:
1. In the standby mode, scroll down to display your list of contacts.
2. Scroll to the contact to which you want to add an address or note.
3. Select Details > Options > Add detail > Image to save an image from My
albums or to save a new image with the camera function, or Tone to select
the default tone or a new tone from My albums.
Change default number
To change the default number for an existing contact.
1. In the standby mode, scroll down to display your list of contacts.
2. Select the contact for which you want to change the default number and Details.
3. Highlight the new default number, and select Options > Set as default.
Send business cards
If supported by your wireless service provider, you can send a business card to a
compatible phone or other handheld device.
1. In the standby mode, scroll down to display your list of contacts.
26
C o n t a c t s
2. Select the contact to which you want send as a business card and Details.
3. Select the number to use and Options > Send business card > Via multimedia,
Via text message, Via infrared, or Via Bluetooth.
4. Select Primary number or All details.
5. Enter the number for your recipient, or select Search to retrieve a number
from your contacts; select OK.
■ Edit contacts
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight the name, number, detail, or image you wish to edit and select
Options. The type of detail you highlight determines your selection of options.
Choose one of the following options:
View—View the phone number of the contact.
Add detail > Name—Add a name to the contact. This option appears only if
the contact does not have a name.
Add detail > Number > General, Mobile, Home, Work, or Fax—Add a number
to the contact.
Add detail > E-mail address, Web address, Street address, Note, Image, or
Tone—Add an additional detail to the contact.
Edit name, Edit number, or Edit detail—Edit the detail of the contact.
Change image—Change the image associated with the contact.
Delete contact—Delete the entire contact entry from your contacts.
Delete—Delete the detail from this contact.
Send message—Create and send a text message to the contact.
Use number—Display the phone number, ready for use.
Set as default—Make the number the default for the contact.
Change type > General, Mobile, Home, Work, or Fax—Change the number type.
Add voice tag—Add a voice tag to the contact.
Save to My albums—Save the image to your My albums.
Send business card > Via infrared, Via text message, Via Bluetooth, or Via
multimedia—Send the contact as a business card to another phone.
Caller groups > Select No group to remove the contact from a caller group
or Family, VIP, Friends, Business, or Other to add the contact to an existing
caller group.
1-touch dialing—Assign the contact to your 1-touch dialing list.
27
C o n t a c t s
■ Modify contact settings
In the standby mode, select Menu > Contacts > Settings and the setting you
wish to change:
Scrolling view—Select Normal name list, Name and number, Large name list, or
Name and image view.
Memory status—View the amount of phone memory used as well as the amount
of phone memory available.
■ Set up caller groups
You can add contacts to any of five caller groups, and assign a unique ringing
tone or graphic to that group. This enables you to identify callers from the group
by their unique ringing tone or graphic.
Set up a caller group
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight a number, select Options > Caller groups and the select the caller
group you wish to add the number to.
Modify a caller group
In the standby mode, select Menu > Contacts > Caller groups > Family, VIP,
Friends, Business, or Other and one of the following options:
Rename group—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group logo—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
■ Set up voice tags
Before using voice tags, note the following:
•
Voice tags are not language-dependent. They are dependent on the
speaker's voice.
•
•
You must say the name exactly as you said it when you recorded it.
Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
•
Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
28
C o n t a c t s
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing
in all circumstances.
Assign a voice tag
To use voice dialing, you must first assign a voice tag to a number.
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, select Details.
3. Highlight the number you want to assign a voice tag, select Options > Add
voice tag.
4. Select Start, then speak clearly into the microphone. Do not select Quit unless
you want to cancel the recording.
5. After you finish speaking, the phone automatically stops recording, saves, and
replays the voice tag.
appears next to the phone numbers which have voice tags assigned.
Use a voice tag
1. In the standby mode, select and hold the right selection key.
2. When you hear several beeps and Speak now appears, release the key.
3. Pronounce the voice tag clearly into the microphone.
When the phone finds the voice tag, a notification appears, and the phone
automatically dials the number. If the phone does not locate a number or
recognize the voice tag, No match found appears.
Play back a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to play back, and select Playback.
Modify a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to change, and select Change.
3. Select Start, and speak clearly into the microphone. The phone repeats your
voice tag, and Voice tag changed appears.
29
C o n t a c t s
Delete a voice tag
1. In the standby mode, select Menu > Contacts > Voice tags.
2. Scroll to the voice tag you want to delete, and select Delete.
Delete voice tag? appears.
3. Select Yes to erase the voice tag.
■ Set up 1-touch dialing
You can associate any entry in your contacts with a key from 2–9; to dial those
entries, press and hold the assigned key.
Assign a key to 1-touch dialing
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to any empty slot, and select Assign.
3. Enter the number (including the area code), and select OK; or select Search to
retrieve a number from your contacts.
4. If necessary, enter the contact name for the number, and select OK.
If 1-touch dialing is off, the phone displays a prompt asking if you want to
activate 1-touch dialing. Select Yes to activate 1-touch dialing.
Change 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing entry you wish to change, and select
Options > Change.
3. Enter the new number, or select Search to retrieve a number from your
contacts; select OK.
4. If necessary, enter the contact name for the number, and select OK to
change the key assignment.
Delete 1-touch dialing numbers
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to the 1-touch dialing location you wish to delete.
3. Select Options > Delete > Yes to delete the key assignment.
■ Display phone number
In the standby mode, select Menu > Contacts > My number to display your
phone number.
30
C o n t a c t s
■ Delete contacts
Delete individual contacts
1. In the standby mode, scroll down to display your list of contacts.
2. Highlight a contact, and select Options > Delete contact > Yes or No.
Delete all contacts
1. In the standby mode, select Menu > Contacts > Delete all contacts > Yes.
2. Enter your lock code, and press OK. See "Security," p. 79 for more information.
31
C a l l H i s t o r y
5. Call History
Call history stores information about the last 30 missed, 30 received, or 30 dialed
calls. It also adds the total duration of all calls. When the number of calls exceed
the maximum, the most recent call replaces the oldest.
Whether viewing missed, received, or dialed calls, the menu options are the same:
Time of call—Display the date and time of the call.
Send message—Send a message to the number.
Use number—Edit the number and associate a name with the number.
Save—Enter a name for the number and save it to your contacts list.
Add to contact—Add the number to an existing name in your contacts list, if the
number is not associated with a name.
Delete—Clear the number from memory.
Call—Call the number.
■ View missed calls
The missed calls feature does not function when your phone is switched off.
Missed calls are calls that were never answered.
1. In the standby mode, select Menu > Call history > Missed calls; if a missed
call notification appears, select List.
2. Scroll to a name or number, select Options, and a menu option.
■ View received calls
Received calls are calls that have been answered.
1. In the standby mode, select Menu > Call history > Received calls.
2. Scroll to a name or number, select Options, and a menu option.
■ View dialed numbers
Dialed calls are numbers you have previously dialed from your phone:
1. In the standby mode, press the call key; or select Menu > Call history >
Dialed numbers.
2. Scroll to a name or number, select Options, and a menu option.
32
C a l l H i s t o r y
■ Time of call
You can make or receive up to five calls to or from the same number and view the
time each call occurred. Your clock must be set for this feature to work accurately.
1. While viewing a missed, received, or dialed call, select Options > Time of call.
2. Scroll down to view the most recent call times from this number.
3. Select Back to return to the options list.
■ Clear log lists
You can delete any missed, dialed, or received calls from phone memory.
In the standby mode, select Menu > Call history > Clear log lists > All call lists,
Missed calls, Received calls, Dialed numbers, or Message recipients.
■ Call timers
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
You can view the duration of your calls.
In the standby mode, select Menu > Call history > Call timers and one of the
following options:
Last call duration—Check the time of your last call.
Dialed calls' duration—Check the combined time of calls you dialed for either
Home or Roaming.
Received calls' duration—Check the combined time of calls you received for either
Home or Roaming.
All calls' duration—Check the combined time of all calls.
Life timer—Check the total airtime minutes logged on your phone.
Clear timers—Enter your lock code, and select OK to clear all timers on your phone.
Note: Some timers, including the life timer, may be reset during service
or software upgrades.
■ Duration of data or fax calls
Data/fax calls are a network service. See "Network services," p. 6 for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data and fax calls.
33
C a l l H i s t o r y
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
In the standby mode, select Menu > Call history > Data/fax calls and one of the
following options:
Last sent data/fax—View the size (KB) of the last sent data or fax call.
Last received data/fax—View the size (KB) of the last received data or fax call.
All sent data/fax—View the size (KB) of all sent data and fax calls.
All received data/fax—View the size (KB) of all received data and fax calls.
Last data/fax's duration—View the duration time of the last data or fax call.
All data/fax calls' duration—View the duration time of all calls.
Clear all data/fax logs—Select Yes to clear all data and fax logs.
■ Duration of wireless web calls
Wireless web is a network service. See "Network services," p. 6, for more
information. If your wireless service provider supports this feature, you can view
the size or duration of sent or received data from the wireless web.
Note: The actual invoice for calls and services from your service provider
may vary, depending on network features, rounding off for billing, taxes
and so forth.
In the standby mode, select Menu > Call history > Wireless web calls and one of
the following options:
Last sent web data—View the size (KB) of the last send browser data.
Last rcvd. web data—View the size (KB) of the last received data.
All sent web data—View the size (KB) of all sent browser data.
All received web data—View the size (KB) of all received browser data.
Last wireless web session—View the duration time of the last browser session.
All wireless web sessions—View the duration time of all browser sessions.
Clear all web logs—Select OK > Yes to clear all browser logs.
34
M e s s a g i n g
6. Messaging
Your phone is capable of creating and receiving text, multimedia, voice and
minibrowser messages. Check with your service provider to see what messaging
is available for you.
■ Text messages
Text messaging is a network service. See "Network services," p. 6 for more
information. If your wireless service provider supports this feature, you can send and
receive text messages to compatible phones that are also subscribed to the service.
When composing text messages, check the number of characters allowed in the
top right corner of the message. Using special (unicode) characters takes up more
space. If there are special characters in your message, the indicator may not show
the message length correctly. Before the message is sent, the phone will tell you
if the message exceeds the maximum length allowed for one message. Also, you
can make distribution lists that contain phone numbers and names from your
contact list. See "Distribution lists," p. 46 for more information.
Note: When sending messages, your device may display Messagesent. This is
an indication that the message has been sent by your device to the message
center number programmed into your device. This is not an indication that
the message has been received at the intended destination. For more details
about messaging services, check with your service provider.
Text message folders and options
In the standby mode, select Menu > Messaging > Text messages and from
the following:
Create message—Create and send messages.
Inbox—Check for received text messages. Text messages are automatically stored
in the Inbox when they are received. A notification appears when a message
arrives in the Inbox.
Outbox—Check for outgoing text messages. Text messages are automatically
stored in the Outbox as they are sent. If your service is interrupted while sending,
the text message is stored in the Outbox until another delivery attempt is made.
Sent items—Sent text messages are stored in Sent items.
Drafts—Save incomplete text messages in a draft. Store drafts of text messages
in Drafts to be completed at a later time.
35
M e s s a g i n g
Archive—Save text messages in Archive.
Templates—Select from a collection of prewritten Templates, when creating text
messages. Preloaded Templates can be edited and customized.
My folders—Create and name personal folders.
Delete messages—Delete messages from a selected folder or all folders.
Message settings—Change settings for reading, writing, and sending text messages.
Write and send text messages
1. In the standby mode, select Menu >
Messaging > Text messages >
Create message.
2. Compose a text message using the keypad.
See "Choose a text message option," p. 37
for composing options.
3. Select Send to > Recently used, Send to
number, Send to many, or Send to
distribution list (if you have created one).
4. Select a number or distribution list, enter
the recipient’s phone number, or select
Search to retrieve a number or e-mail
address from your contacts list; select Send.
Use a template
Templates are short, prewritten messages that can be retrieved and inserted into
new text messages.
1. In the standby mode, select Menu > Messaging > Text messages > Create
message > Options > Use template.
2. Select one of the available templates and complete the text message using
the keypad.
Read and reply to text messages
When you receive a text message, a notification appears and the unopened letter
icon (
) is displayed.
1. Select Show to read the text message or Exit to dismiss the notification.
Scroll to view the whole message, if necessary.
When unopened messages are in your inbox,
corner during standby mode as a reminder.
is shown in the upper left
36
M e s s a g i n g
2. Select Reply > Empty screen, Original text, Template, or one of the predefined
answers provided.
3. Compose your reply with the keypad, and select Send.
Choose a text message option
Create message options
When you create or reply to a text message, depending on the mode of text input
you are using and the features supported by your wireless service provider, some
or all of the following are available:
Sending options—Mark or Unmark a message as Urgent, Delivery note, Callback
number, or Signature.
Clear text—Erases all text from your message.
Insert contact—Insert detail from your contacts list into your message.
Insert number—Insert a phone number or find a phone number in the contacts list.
Save—Save the message in Drafts.
Exit editor—Exits the message editor.
Use template—Insert a predefined template.
Insert smiley—Insert a smiley.
Insert word or Edit word—Enter or edit the text of a new word that might not appear
in the predictive text dictionary. This displays only when predictive text is on.
Insert symbol—Insert a special character. This displays only when predictive text
is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Read message options
When you read a text message, the following options are available:
Delete—Discard the text message.
Use detail > Number, E-mail address, or Web address—Select Save to create a new
contact; select Options > Add to contact, Send message, or Call for other options.
Move—Save the message to Archive, Templates, or a folder you have created.
Forward—Forward the text message to another phone number.
Lock or Unlock—Lock or unlock the text message. The appropriate option appears.
Rename—Edit the title of the text message.
37
M e s s a g i n g
Use custom folders
Your phone has a folder system that saves and stores text messages. Additionally
you can create custom folders.
Create a custom folder
To organize your messages, create custom folders, and save messages you want
to keep there.
1. In the standby mode, select Menu > Messaging > Text messages > My
folders > Add fldr. to create your initial custom folder.
Select Menu > Messaging > Text messages > My folders > Options > Add
folder to create an additional custom folder.
2. Enter a name for the new folder, and select OK.
Rename a custom folder
1. In the standby mode, select Menu > Messaging > Text messages > My folders.
2. Folders you have created appear in the display. Scroll to the folder you wish to
rename, and select Options > Rename folder.
3. Select and hold Clear to delete the existing entry; enter a new name for the
folder; select OK to confirm or Back to exit.
Delete a custom folder
Only folders in My folders can be deleted. The Inbox, Outbox, Sent items, Drafts,
Archive, and Templates folders are protected. When you delete a folder, all messages
in the folder are also deleted.
1. In the standby mode, select Menu > Messaging > Text messages > My folders.
2. Scroll to the folder you wish to delete, and select Options > Delete folder.
3. Select Yes to delete or No to exit.
Delete text messages
If your message memory is full and you have more text messages waiting at the
network,
blinks in the standby mode. You can do the following:
•
•
Read some of the unread text messages, and delete them.
Delete text messages from some of your folders.
Delete a single text message
To delete a single text message, you need to open it first.
1. In the standby mode, select Menu > Messaging > Text messages.
38
M e s s a g i n g
2. Select the folder containing the text message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete the message or No to exit.
Delete all messages in a folder
1. In the standby mode, select Menu > Messaging > Text messages > Delete
messages and one of the following:
All—Deletes all text messages in the folder.
All read—Deletes only the read text messages in the folder.
All unread—Deletes all unread text messages in the Inbox.
2. If you select All or All read, select Mark or Unmark to choose the folders from
which to delete text messages. Select Options > Mark all to choose all folders.
3. Select Done after choosing the folders.
4. Select Yes to delete the message or No to exit.
Text message settings
Sending options
In the standby mode, select Menu > Messaging > Text messages > Message
settings > Sending options and the setting you wish to change:
Urgent—Select the priority of the message.
Delivery note—Select On to receive a note confirming delivery of a text message.
Send callback number—Select On to send your default phone to the recipient.
Signature—Select On to append a signature to an outgoing text message. If you
have not created a signature, select On; enter a signature, and select OK.
Other settings
In the standby mode, select Menu > Messaging > Text messages > Message
settings > Other settings and the setting you wish to change:
Message font size —Select the desired font size for the display.
Message overwriting > Sent items only, Inbox only, Sent items & Inbox, or Off—Set
your phone to automatically replace old messages in Inbox or Sent items when new
ones arrive. When the message memory is full, your phone cannot send or receive
any new messages.
Save sent messages—Select Always save or Always prompt to save sent text
messages to Sent items. Select Off to not save messages.
Queue msgs. if no digital—Select On or On prompt to store text messages in the
Outbox until they can be sent with a digital service. Select Off to not store messages.
39
M e s s a g i n g
■ Multimedia messages
Multimedia messaging is a network service. See "Network services," p. 6 for more
information. If your wireless service provider supports this feature, you can send
and receive multimedia messages to compatible phones that are also subscribed
to the service.
A multimedia message can contain text, sound, a picture, or a video clip. Your phone
supports multimedia messages that are up to 600 KB. If the maximum size is
exceeded, the phone may not be able to receive the message.
Note: Only devices that have compatible features can receive and display
multimedia messages. The appearance of a message may vary depending
on the receiving device.
Depending upon your network, you may receive a message that includes an Internet
address where you can go to view the multimedia message. Pictures are scaled to
fit the display area of the phone. Your phone has a multimedia message viewer
for playing messages and a multimedia inbox for storing saved messages. Once
you save the multimedia message, you can use the image as a screen saver or the
sound as a ringing tone.
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Multimedia messaging only supports the following formats:
•
•
Picture: JPEG, GIF, animated GIF, WBMP, BMP, and PNG
Sound: MP3, AAC, AAC+, eAAC+, SP-MIDI, AMR audio, QCELP,
and monophonic ringing tones
•
Video: clips in MPEG4, H.263, and H.264 format with QCIF image size
You cannot receive multimedia messages if you have a call in progress, games or
other applications running, or an active browsing session. Because delivery of
multimedia messages can fail for a variety of reasons, do not rely solely upon
them for essential communications.
Multimedia message folders and options
In the standby mode, select Menu > Messaging > Multimedia msgs. and from
the following:
Create message—Create and send multimedia messages.
Inbox—Check for received multimedia messages. Multimedia messages are
automatically stored in the Inbox when they are received. You receive a
notification when a message arrives in your Inbox.
40
M e s s a g i n g
Outbox—Check for outgoing multimedia messages. Multimedia messages are
attempt is made.
Sent items—Sent multimedia messages are stored in Sent items.
Saved items—Save multimedia messages for later use in Saved items.
Delete messages—Delete multimedia messages from the Inbox, Outbox, Sent
items, or Saved items.
Message settings—Change the settings for multimedia messages.
Write and send multimedia messages
1. In the standby mode, select Menu >
Messaging > Multimedia msgs. >
Create message.
2. Compose a message using the keypad.
See "Choose a multimedia message
option," p. 42 for composing options.
3. Select Send to > Recently used, To phone
number, To e-mail address, Album, or To
many, or Distribution lists.
4. Select a number or distribution list, and
enter the recipient’s phone number or
email address; or select Search to retrieve
a number or e-mail address from your
contacts list.
5. Select Send.
The multimedia message is moved to the Outbox for sending.
The wireless network may limit the size of multimedia messages. If the inserted
picture exceeds this limit, the device may make it smaller so that it can be sent by
multimedia messaging.
It takes more time to send a multimedia message than to send a text message. While
the multimedia message is being sent, the animated indicator
is displayed
and you can use other functions on the phone. If there is an interruption while
the message is being sent, the phone automatically tries to resend it a few times.
If this fails, the message remains in the Outbox and you can try to manually resend
it later. Check your Outbox for unsent messages.
41
M e s s a g i n g
Note: When sending messages, your device may display the words
Multimedia message sent. This is an indication that the message has
been sent by your device to the message center number programmed
into your device. This is not an indication that the message has been
received at the intended destination. For more details about messaging
services, check with your service provider.
Messages that you send are saved in Sent items if the setting Save sent messages
is set to Yes. See "Multimedia message settings," p. 45. This is not an indication
that the message has been received at the intended destination.
Read and reply to multimedia messages
When a multimedia message is received,
the percentage display indicating the download progress. Once the message has
been fully downloaded, and a notification appears in the display.
appears in the display along with
1. To view the multimedia message immediately, select Show.
To save the message to the inbox for later viewing, select Exit.
To view a saved message, select Menu > Messaging > Multimedia msgs. >
Inbox and the message you want to view.
While viewing a message, select Play to play the entire message
2. Select Reply or Options > Reply to all, and compose your reply.
3. Select Send.
If
blinks and Multimedia mem-ory full. View waiting message. appears, the
memory for multimedia messages is full. To view the waiting message, select
Show. Before you can save the message, you need to delete some of your old
messages. See "Delete multimedia messages," p. 44 for more information.
Important: Exercise caution when opening messages. Multimedia message
objects may contain malicious software or otherwise be harmful to your
device or PC.
Choose a multimedia message option
Create message options
When you create or reply to a multimedia message, depending on the mode of
text input you are using and the features supported by your wireless service
provider, some or all of the following options are available:
Send to album—Send message to an online album. This is an online network service.
Check with your service provider for more information.
42
M e s s a g i n g
Insert > Image, Sound clip, or Video clip—Insert an image, sound clip, or video clip file
from your My albums. Open the desired folder, and select the file and Options > Insert.
Copyright protections may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Insert > New image—Opens the camera to create a new image that you attach to
the message.
Insert > New sound clip—Opens the voice recorder to create a new sound clip
that you attach to the message.
Insert > Slide—Insert a slide into your message. Each slide can contain text,
business card, calendar note, one image, and one sound clip.
Insert > Business card—Insert contact as a business card.
Insert > Calendar note—Insert a calendar note.
Delete > Image, Sound clip, or Video clip—Delete an image, sound clip, or video clip
file from your message. Only appears when your message has a file attachment.
Delete > Slide—Delete the current slide from your message.
Edit subject—Edit the subject heading.
Clear text—Erases all text from the current slide in your message.
Preview—Preview the message or slide presentation before sending it. Select Stop
to end the preview. Select Play to start the preview again or Back to return to the
list of options.
Previous slide—Move to the previous slide. Option only appears if there is a
previous slide.
Next slide—Move to the next slide. Option only appears if there is next slide.
Slide list—Shows a list of all slides. Select the slide you wish to edit.
Slide timing—Set the timing interval for each slide. By default, each slide appears
for 12 seconds.
Place text first or Place text last—Move text to the top or bottom of the slide.
By default, the text appears at the bottom or last.
Save—Saves the message to Saved items.
More options > Insert contact—Insert a name from your contacts list into
your message.
More options > Insert number—Insert a phone number or find a phone number in
the contacts list.
More options > Message details—Shows the details of your multimedia message.
Exit editor—Exits the message editor.
Insert smiley—Insert a smiley.
43
M e s s a g i n g
Insert word or Edit word—Enter or edit the text of a new word that might not appear
in the predictive text dictionary. This appears only when predictive text is on.
Insert symbol—Insert a special character. This appears only when predictive text
is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This appears only when predictive text is on.
Read message options
When you read a multimedia message, the following options are available:
Set contrast—Adjust the contrast of an image. This option is only available when
viewing an image.
Details—Displays the details of a highlighted file attachment.
Save image, Save sound clip, or Save video clip—Save the corresponding file to
the My albums. Images, sound clips, and video clips must be opened before you
can save them.
Save link—Save the corresponding Web link. This appears only when a Web link
is highlighted.
Business card—Open an attached business card.
Calendar note—Open an attached calendar note.
Delete—Delete the message you are viewing.
Reply or Reply to all—Enter a reply and send it to the original sender and any
other recipients of the message.
Use detail—Use a corresponding number or e-mail address. The number or e-mail
address must be highlighted
Forward—Forward the message: Send to number, Send to e-mail, or Send to many.
Album—Forward the message to an online album. This is an online network service.
Check with your service provider for more information.
Message details—View the sender’s name and phone number, the message center
used, reception date and time, message size and type.
Delete multimedia messages
If your message memory is full and you have more multimedia messages waiting
at the network,
blinks in the standby mode. You can do the following:
Read some of the unread multimedia messages, and delete them.
Delete multimedia messages from some of your folders.
•
•
44
M e s s a g i n g
Delete a single multimedia message
To delete a single multimedia message, you need to open it first.
1. In the standby mode, select Menu > Messaging > Multimedia msgs.
2. Select the folder containing the multimedia message you wish to delete.
3. Select the message you wish to delete and Options > Delete.
4. Select Yes to delete or No to exit.
Delete all multimedia messages in a folder
1. In the standby mode, select Menu > Messaging > Multimedia msgs. > Delete
messages > Inbox, Outbox, Sent items, or Saved items.
2. Select Yes to delete the all messages in the folder or No to exit.
Multimedia message settings
Save sent messages
You can save the multimedia messages that you send to the Sent items folder.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Save sent messages > No or Yes.
Delivery reports
You can request delivery reports to inform you if a message is delivered.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Delivery reports > On or Off
Scale image down
You can request for images to be automatically scaled down.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Scale image down > Yes or No.
Default slide timing
You can set the default time in mm:ss for the slides of a multimedia message.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Default slide timing, enter a slide time, and select OK.
Allow multimedia reception
Before you can use the multimedia message feature, you must specify whether
you want to receive message at all times or only if you are in the service
provider’s home system. This is a network service. Check with your service
provider for more information.
45
M e s s a g i n g
The default setting ofthe multimedia message service is generally on. The appearance
of a multimedia message may vary depending on the receiving device.
You can choose to receive all messages, to block all messages, or to receive messages
only when you are in the service provider’s home network.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Allow multimedia recept. and one of the following:
Yes—Allow all incoming messages.
In home network—Allow incoming messages only if you are in the service provider’s
home system. This is a network service. Check with your service provider for
more information.
No—Block all incoming messages.
Incoming multimedia messages
You can set how your phone retrieves incoming multimedia messages.
In the standby mode, select Menu > Messaging > Multimedia msgs. > Message
settings > Incoming multim. msgs. and one of the following:
Retrieve—Sets the phone to automatically retrieve all multimedia messages.
When new messages arrive, you are notified that a multimedia message is
received. If you choose to automatically retrieve messages, you can select Show
to read the multimedia message or Exit to view them in your inbox later.
Retrieve manually—Choose the messages you wish to retrieve. When new messages
arrive, you are notified that a multimedia message is available for retrieval. If you
select to manually retrieve messages, select Show to open the message notification,
then Retrieve. Select Exit to save the notification to your inbox, and retrieve the
message later.
Reject—Sets the phone to reject multimedia messages.
Allow or block advertisements
Allows you to block advertisements. This setting is not available if multimedia
reception is blocked.
From the start screen, select Menu > Messaging > Multimedia msgs. > Message
settings > Allow advertisements > Yes or No.
This is a network service. Check with your service provider for more information.
■ Distribution lists
Distribution lists allow you to send text or multimedia messages to a designated
group of people.
46
M e s s a g i n g
Create distribution lists
1. In the standby mode, select Menu > Messaging > Distribution lists > New list.
If you create a second distribution list, select Menu > Messaging >
Distribution lists > Options > Create new list.
2. Enter a name for the list, and select OK.
3. To add a contact to this list, select Add new, and add the contacts one by one.
A distribution list only contains phone numbers of recipients.
Add and remove contacts
To add contacts, select Menu > Messaging > Distribution lists > the list > Add
new. Add the contacts one by one.
To remove contacts, select Menu > Messaging > Distribution lists > the list >
Options > remove contact name.
Use distribution lists
1. In the standby mode, select Menu > Messaging > Distribution lists.
2. Lists you create are displayed. Scroll to the list you wish to modify; select
Options and one of the following:
Create new list—Create a new distribution list.
Send message—Send message to the distribution list.
Rename list—Rename the distribution list.
Clear list—Clear the distribution list of all current contacts.
Delete list—Delete the distribution list.
■ Voice messages
If you subscribe to voice mail, your wireless provider will furnish you with a voice
mailbox number. You need to save this number to your phone to use voice mail.
When you receive a voice message, your phone will beep, displaying a message,
or both. If you receive more than one message, your phone shows the number of
messages received.
Save voice mailbox number
Your wireless provider may have already saved your voice mailbox number to
your phone. If so, the number will appear in the display in step 2. Select OK to
leave the number unchanged.
47
M e s s a g i n g
1. In the standby mode, select Menu > Messaging > Voice messages > Voice
mailbox number.
2. If the number is not displayed or incorrect, enter your voice mailbox area code
and number.
3. Select OK.
Call and set up your voice mail
1. After you save the voice mailbox, in the standby mode, press and hold 1.
2. When you connect to voice mail and the prerecorded greeting begins, follow
the automated instructions to set up your voice mail.
Listen to your voice mail
After you set up voice mail, you can dial the number in one of four ways:
•
•
•
•
Dial the number using the keypad.
Press and hold 1.
Select Listen if there is a notification on the display.
In the standby mode, select Menu > Messaging > Voice messages > Listen to
voice messages.
When you connect and the prerecorded greeting begins, follow the automated
instructions to listen to your voice messages.
Automate voice mail
Voice mail services vary by service provider. The following instructions are
examples of common operations. Please check with your service provider for
specific instructions for using your voice mail service.
Write down number and process
1. Write down your voice mailbox number.
2. Call and check your voice mail as you normally would.
3. Write down your interaction with the recorded prompts step-by-step. Note
that each voice mail service may vary. Your steps may resemble the following:
Dial 2145551212, pause 5 seconds, press 1, pause 2 seconds, press 1234,
and press *.
Be precise; you will need this information in "Set up voice mail with dialing
codes," p. 49.
48
M e s s a g i n g
Set up voice mail with dialing codes
1. In the standby mode, select Menu > Contacts > 1-touch dialing.
2. Scroll to an empty 1-touch dialing slot, and select Assign.
3. Enter your voice mailbox number, including the area code.
4. Refer to dialing codes, and enter any codes as necessary using the
information that you saved from "Write down number and process," p. 48.
For example, if you pause for 5 seconds after connecting to voice mail, enter p
information on dialing codes see "Insert dialing codes," p. 25.
5. Enter any remaining pauses or other information that allows you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
■ Minibrowser messages
Minibrowser messaging is a network service. See "Network services," p. 6 for
more information.
If your wireless service provider supports this feature, you can check for e-mail
messages using the minibrowser. In the standby mode, select Menu >
Messaging > Minibrowser msgs.
See "Wireless Web," p. 50 for more information on using your phone to access
web pages.
49
W i r e l e s s W e b
7. Wireless Web
Wireless web is a network service. See "Network services," p. 6, for more information.
Your phone has a built-in browser you can use to connect to selected services on
the mobile Internet. If your wireless service provider supports this feature, you can
view weather reports, check news or flight times, view financial information, and
much more. The Web browser on your phone can display WAP-based content.
Your device may have some bookmarks loaded for sites not affiliated with Nokia.
Nokia does not warrant or endorse these sites. If you choose to access them, you
should take the same precautions, for security or content, as you would with any
Internet site.
If the security indicator (
) is displayed during a connection, the data transmission
between the device and the Internet gateway or server is encrypted. The service
provider secures the data transmission between the gateway and the content server.
Important: Use only services that you trust and that offer adequate
security and protection against harmful software.
■ Mobile Internet access
Because mobile Internet content is designed to be viewed from your phone, your
wireless provider is now your mobile Internet service provider as well.
Your wireless provider has created a home page and set up your browser to go to
this page when you log on to the mobile Internet. Once at your service provider’s
home page, you may find links to a number of other sites.
It should not be necessary to manually configure the browser on your phone.
Normally this is done by your wireless provider when you subscribe to the
feature. Contact your wireless provider if you have problems using the browser.
■ Sign on to the mobile Internet
In the standby mode, select Menu > Wireless web.
After a brief pause, your phone attempts to connect to your wireless provider’s
home page. If you receive an error message, your phone may not be set up for
browsing. Contact your wireless provider to make sure that your phone is
configured properly.
50
W i r e l e s s W e b
■ Navigate the mobile Internet
Since your phone screen is much smaller than a computer screen, mobile Internet
content is displayed differently than you may be accustomed to seeing. This section
contains guidelines for using phone keys to navigate a WAP site.
Phone keys
•
•
•
•
To browse the WAP site, scroll up or down.
Select a highlighted item.
To enter text, press # to switch text input modes, and then press 0-9.
To enter special characters, press *.
Receive a call while online
Depending on your wireless service provider, you may still be able to receive a
voice call while using the WAP browser.
•
•
To answer the incoming call, press the call key.
To reject the incoming call, press the end key.
After you end your voice call, the mobile Internet connection automatically resumes.
If your wireless service provider does not support incoming calls while browsing,
incoming calls are automatically forwarded to voice mail.
Make an emergency call while online
You can end your data connection and make an emergency call.
1. To close your mobile Internet connection, press the end key.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the emergency number for your present location (for example, 911).
Emergency numbers vary by location.
4. Press the call key.
Clear the cache and disconnect
A cache is a memory location that is used to store data temporarily. If you have
tried to access or have accessed confidential information requiring passwords,
empty the cache after each use. The information or services you have accessed
are stored in the cache. To empty the cache while in the browser menu, select
Navigate > Advanced > Clear. Highlight and select Cache > Clear. The cache also
clears when you press and hold the end key to power off your device.
To close your mobile Internet connection while browsing, press the end key.
51
M y A l b u m s
8. My Albums
You can save pictures, video clips, recordings, music files, and ringing tones to
folders in the My albums, and add new folders to the ones already there. You can
download images and tones using multimedia messaging, text messaging, mobile
Internet sites, or Nokia PC Suite.
Your phone supports a digital rights management system to protect content that
you have acquired. A piece of content, such as a ringing tone, can be protected and
associated with certain usage rules, for example, the number of usage times or a
certain usage period. The rules are defined in the content activation key that can be
delivered with the content or separately, depending on the service provider. You
may be able to update these activation keys. Always check the delivery terms of any
content and activation key before acquiring them, as they may be subject to a fee.
Copyright protection may prevent some images, ringing tones, and other content
from being copied, modified, transferred, or forwarded.
Your phone has about 20 MB of memory for storing files in the My albums. This
memory is not shared with other functions, such as contacts. If the phone displays
a message that the memory is full, delete some existing files before proceeding.
You can also use a compatible miniSD cards to add memory.
Warning: Use only compatible miniSD cards with this device. Other
memory cards, such as multimedia cards, do not fit in the miniSD card
slot and are not compatible with this device. Using an incompatible
memory card may damage the memory card as well as the device, and
data stored on the incompatible card may be corrupted.
■ Open a folder
In the standby mode, select Menu > My albums to view the folder system. The phone
folder system includes:
Memory card—If there is a miniSD card in the phone, the miniSD name is displayed
below the signal strength indicator. You can access your miniSD card folder system.
Images—By default, camera photos are saved to this folder.
Video clips—By default, camera video clips are saved to this folder.
Music files—By default, music files are saved to this folder.
Themes—A set of themes included with your phone are stored here.
Graphics—A set of graphics included with your phone are stored here.
Tones—A set of ring tones included with your phone are stored here.
52
M y A l b u m s
Recordings—By default, voice recordings are saved to this folder.
Received files—Files sent directly to your phone are stored here.
Your folders—Folders you create appear after the preset folders.
To open a folder, highlight the folder and select Open. Once you open the folder
list and highlight a file, you can access the file or the options associated with
that specific file type.
■ My album options
In the standby mode, select Menu > My albums > Options and one of the following:
Setpassword—Create a password (1–8 characters) for the miniSD card, to protect it
against unauthorized use. This option is available only for the miniSD card folder.
Change password—Change the miniSD card password that you have created. This
option is available only for the miniSD card folder and if you have created a password.
Delete password—Delete the miniSD card password that you have created. This
option is available only for the miniSD card folder.
Rename memory card—Enter a name for the miniSD card. This option is available
only for the miniSD card folder.
Format memory card—Delete all files and folders stored on the miniSD card. This
option is available only for the miniSD card folder.
Delete folder—Delete a folder you have created. You cannot delete a preset folder.
Move—Move the selected folder into another folder. After selecting Move,
highlight another folder, and select Move to. You cannot move a preset folder.
Rename folder—Rename a folder you have created. You cannot rename a preset folder.
Details—Show the name, size, and date of creation of the selected folder.
Type of view—Choose whether to view the folders as a list with details, list only or
a grid.
Sort—Sort the contents of the selected folder by name, date, format, or size.
Add folder—Create a new folder.
Memory status—Check the available memory for the phone handset or the
miniSD card.
Activation key list—View the list of available activation keys. You can delete
activation keys if desired.
Mark or Mark all—Allows you to mark My albums folders to be moved into
another folder. This function only applies to folders you have created.
Other options appear depending on the type of files that exist in the folders.
53
S h o p
9. Shop
You can use the Shop menu item to download music, ringtones, images, videos,
games and other applications. Select the Shop > Music, Ringer, Images, Videos,
Games, or Apps > Connect to open the browser.
54
M e d i a
10. Media
■ Media player
With Media player you can download, view, and play compatible images, audio
and video files, and animated images from a variety of sources. Media player
plays streaming videos and audio from a network server. Streaming functionality
is a network service and requires network support. Check the availability of these
services, pricing, and tariffs with your network operator or the service provider
whose service you wish to use. Service providers will also give you instructions on
how to use their services.In the standby mode, select Menu > Media > Media
player and one of the following:
Online media—Connects to the operator’s network. This is a network service.
Check with your service provider for pricing and information.
Open My albums—Open the My albums. From the My albums, you can play stored
audio and video files. See "My Albums," p. 52.
Go to address—Enter the address of a mobile Internet service, and select OK.
FF/Rew interval—Choose the interval at which a video clip will fast forward or rewind.
■ Music player
Your phone includes a Music player for listening to music or other tracks in MP3
or AAC format. You can transfer files from a PC to your phone using a USB data
cable, an infrared, or a Bluetooth wireless technology connection. To transfer
music tracks from a compatible PC and manage the music tracks and track lists,
see the instructions for the Nokia Audio Manager application in the Nokia PC
Suite online help. See "Data cable transfer," p. 75; "Infrared connectivity," p. 75;
and "Bluetooth connectivity," p. 72 for more information on transferring music
tracks to your phone.
Music files stored in the Music files folder of the My albums are automatically
detected and added to the default playlist. Music files stored elsewhere, such as
in a miniSD card folder, must be defined in a track list before you can listen to
them.You can listen to the sound files through a compatible headset or the
phone loudspeaker.You can make or answer a call while using Music player.
During a call, the playback is paused. When the call ends, Music player restarts
where it left off.
55
M e d i a
Play music tracks
In the standby mode, select Menu > Media > Music player. If there are no music
files in the Music files folder, you can select another folder before entering the
Music player. The details of the first track on the default track list are shown.
To use the graphical keys,
,
,
, or
, on the display, scroll left or
right to the desired key, and select it.
Play track—To play a track, select
.
Adjust volume—To adjust the volume level,
use the volume key.
Stop track—To stop the playing, select
or
press and hold the end key.
Skip tracks—To skip to the beginning of the
next track, select
of the previous track, select
Rewind or fast forward—To rewind the
. To skip to the beginning
twice.
current track, select and hold
. To fast
forward the current track, select and hold
. Release the key at the position you want.
Warning: Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing.
Music player options
Select Music files or other music folder and Options and one of the following:
Play via Bluetooth—Make a connection to an audio enhancement using
Bluetooth connectivity.
Track list—View all the tracks available on a track list. To play a track, highlight
the track, and select Play. Select Options > Send to send the music file. Select
Options > Refresh all tracks to refresh the track list (for example, after adding
new tracks to the list). Select Options > Change track list to change the track list
that is shown when you open the Music player menu, if several track lists are
available in the phone.
Play options—Select Random to play the tracks on the track list in random order.
Select Repeat to play the current track or the entire track list repeatedly.
56
M e d i a
Media equalizer—The equalizer enhances the sound quality when using a headset
(only) with the Music player by amplifying or attenuating frequency bands. There
are five preset equalizer settings (Normal, Pop, Rock, Jazz, and Classical) and two
customizable settings.
Headset or Loudspeaker—With the headset attached you can toggle between
listening to the Music player through a headset or the loudspeaker. When using a
compatible headset, you can skip to the next track by pressing the headset key quickly.
Warning: When using the stereo headset your ability to hear outside
sounds may be affected. Do not use the stereo headset where it can
endanger your safety.
Send > Via multimedia, Via infrared, or Via Bluetooth—Send music files to a
compatible device.
Memory status—View used and free memory of Handset and Memory card.
■ Radio
Your phone has an FM radio that also functions as an alarm clock radio. You can
listen to the FM radio on your phone through the hands-free speaker enhancement
or with a headset. For FM stereo, connect a compatible music stand or stereo headset
to the connector on the bottom of the phone or connect a 2.5 mm headset to the
headset port on the side of the phone.The FM radio depends on an antenna other
than the wireless device antenna. A compatible headset or enhancement needs
to be attached to the device for the FM radio to function properly.The quality of a
radio broadcast depends on coverage of the radio station in that particular area.
Warning: Listen to music at a moderate level. Continuous exposure to
high volume may damage your hearing.
Play radio
In the standby mode, with an enhancement or headset connected, select Menu >
Media > Radio. The Radio turns on and plays the last radio frequency you used.
To use the graphical keys,
,
,
, or
, on the display, scroll left or
right to the desired key, and select it.
57
M e d i a
Channel search—To start a channel search,
select and hold
radio frequency in 0.1 MHz steps, briefly press
or
or
. To change the
.
Switch off—Press and hold the end key to turn
off the radio.
Adjust volume—To adjust the volume level,
use the volume key.
Save channel—To save the channel to a
memory location 1 to 9, press and hold the
corresponding number key. To save a channel
to a memory location 10 to 20, briefly press 1
or 2, then press and hold desired number.
Enter the name of the channel, select OK.
Select channel—To select to a channel, select
or
. To go directly to a
saved channel, briefly press the corresponding number keys.
When an application using a browser connection is sending or receiving data, it
may interfere with the radio.
When you place or receive a call, the radio automatically mutes. Once the call is
ended, the radio switches back on.
Radio options
In the standby mode, select Menu > Media > Radio. The radio turns on. Select
Options and one of the following:
Turn off—Turns off the radio.
Save station—Enter a name for the channel, and select OK. Select one of 20
locations to save the channel location.
Stations—Select from list of current saved channels on your phone. Use Options >
Delete station to clear channels or Options > Rename to rename channels.
Mono output or Stereo output—Listen to the radio in monaural mode or in stereo
(default). Stereo output is available through a stereo enhancement.
Headset or Loudspeaker—With the headset attached, listen to the radio through
a headset or the loudspeaker.
Set frequency—Manually enter the frequency of a known radio station, and select
OK. You can also press * to set a frequency.
58
M e d i a
■ Voice recorder
Voice recorder allows you to make a short (up to 3 minutes) recording and save it
to the Recordings folder or another folder in the My albums. The recorder cannot
be used when a data call is active.
Record speech or sound
1. In the standby mode, select Menu > Media > Voice recorder.
2. To start the recording, select record virtual button.
3. Hold the phone in the normal position near your ear, and record your message.
4. When you are finished recording, select stop virtual button.
The recording is given a default name and saved to the Recordings list. The default
location of the Recordings list is the Recordings folder in the My albums.
After you have made a recording you can select Play last recorded to replay the
recording and Send last recorded > Via infrared, Via Bluetooth, or Via multimedia
to send the recording to a compatible phone. These options are only available
during the current recording session.
Recording list
1. In the standby mode, select Menu > Media > Voice recorder > Options >
Recordings list.
2. Navigate through the Recordings folder, and select a recording you want
to modify.
3. Select Open to open and play the recording or Options to use the
My albums options.
Change the storage folder
You can select a folder other than Recordings as the default folder to store your
voice recordings.
1. In the standby mode, select Menu > Media > Voice recorder > Select memory.
2. Highlight the new location, and select Set.
■ Equalizer
The equalizer enhances the sound quality when using Music player by amplifying
or attenuating frequency bands. There are five preset equalizer settings
(Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.
59
M e d i a
Activate an equalizer set
In the standby mode, select Menu > Media > Equalizer, and highlight the desired
equalizer setting, and select Activate. Select Options > View to display the
equalizer settings.
Create a custom equalizer set
1. In the standby mode, select Menu > Media > Equalizer.
2. Highlight a customizable setting, and select Options > Edit.
The selected set appears in the display with the bar on the far left highlighted.
The bars adjust frequencies, from the lowest (the far left bar) to the highest
(the far right bar). The higher the indicator on a particular bar, the more that
frequency is amplified.
3. To adjust the lowest frequency, scroll up and down to move the indicator on
the bar.
4. To adjust other frequencies, scroll right and left to move to the other bars.
5. Repeat steps 3 and 4 to adjust the setting for each frequency.
6. When you are finished, select Save.
7. To rename the setting, select Options > Rename, enter a new name,
and select OK.
8. To activate the setting, select Activate.
60
S e t t i n g s
11. Settings
Use the Settings menu to change profiles, display settings, themes, tone settings,
time and date settings, call settings, phone settings, voice commands, connectivity,
enhancements, security settings, application settings, network settings, network
services, restore factory settings, and view phone details.
■ Profiles
Profiles define how your phone reacts when you receive a call or message, how your
keypad sounds when you press a key, and more. Ringing options, keypad tones, and
other settings for each of the available profiles can be left at their default setting,
or customized to suit your needs. The following profiles are available: Normal,
Silent, Meeting, Outdoor, and two customizable profiles.
Profiles are also available for enhancements such as a headset and car kit. See
"Enhancement settings," p. 77.
Activate a profile
In the standby mode, select Menu > Settings > Profiles > Normal, Silent, Meeting,
Outdoor, or custom profile > Activate.
Customize a profile
To modify a profile, do the following:
In the standby mode, select Menu > Settings > Profiles > Normal, Silent, Meeting,
Outdoor, or custom profile > Customize > and a profile option. You cannot rename
the Normal profile. To customize profile tones, see "Tones," p. 63.
Set a timed profile
Timed profiles can be used to prevent missed calls. For example, suppose you attend
an event that requires your phone be set to Silent before the event starts, but you
forget to return it to Normal until long after the event. A timed profile can prevent
missed calls by returning your phone to the default profile at a time you specify.
To set a timed profile, do the following:
1. In the standby mode, select Menu > Settings > Profiles > Normal, Silent,
Meeting, Outdoor, or custom profile > Timed.
2. Enter the time for the profile to expire, and select OK.
Timed profiles can be set up to 24 hours in advance.
61
S e t t i n g s
■ Display
Standby mode settings
Wallpaper
You can set either an Image or a folder of images (Slide set) as wallpaper for the
phone display.
In the standby mode, select Menu > Settings > Display > Standby mode settings >
Wallpaper and one of the following:
On—Active wallpaper on your phone.
Off—Deactivate wallpaper on your phone.
Image—Choose an image from the My albums for wallpaper. Select Open to browse
the Graphics folder. Select the image of your choice for the wallpaper.
Slide set—Select a folder in your My albums to act as a slide show for the wallpaper.
Font color
You can set font color of your phone when in standby mode.
1. In the standby mode, select Menu > Settings > Display > Standby mode
settings > Standby font color.
2. Scroll to select a color from the color grid.
Screen saver
You can choose a screen saver for the phone display. In the standby mode, select
Menu > Settings > Display > Screen saver and one of the following:
On—Active screen saver on your phone.
Off—Deactivate screen saver on your phone.
Screen savers > Image, Slide set, Video Clip, Digital clock, or Open Camera—
Choose an image, video clip or other option to act as your screen saver.
Time-out > Modify the idle time before the screen saver activates.
Note: Power saver is automatically activated following screen saver
time-out to optimize battery life.
Sleep mode
Sleep mode is a power-saving feature that turns the phone display off during
inactivity. You can activate the sleep mode feature on your phone. In the standby
mode, select Menu > Settings > Display > Sleep mode > On or Off.
When Sleep mode is activated the display is completely blank. A blinking LED
indicator shows that the phone is still on.
62
S e t t i n g s
Banner
Banner is a network service. See "Network services," p. 6 for more information.
If your wireless service provider supports this feature, you can choose whether
the display shows the operator logo or a custom banner, when the phone is in the
standby mode.
In the standby mode, select Menu > Settings > Display > Banner >
Default or Customize.
Backlight time-out
You can control the time-out of the backlight on your phone.
In the standby mode, select Menu > Settings > Display > Backlight time-out >
Default (15 seconds). To change the time-out between 15 seconds and 5 minutes,
select Customize.
■ Themes
Themes allows you to personalize the ringtone, screensaver and background on
your phone.In the standby mode, select Menu > Settings > Themes > Select theme
and a theme of your choice.
■ Tones
You can adjust the ringing volume, keypad tones, and more for the active profile.
In the standby mode, select Menu > Settings > Tones and one of the following:
Incoming call alert—Select how your phone will alert you when there is an
incoming call: Ringing, Ascending, Ring once, Beep once, Off.
Ringing tone—Select Open My albums > Tones to select the ringing tone for
incoming calls.
Incoming call video—Select a video to be displayed when there is an incoming call.
Ringing volume—Use the left and right scroll keys to set the volume of your
ringing tone.
Vibrating alert—Activate the vibrating call alert. Select On to activate the
vibrating alert.
Message alert tone—Select the alert tone for incoming messages: Off, Standard,
Special, Beep once, Long & loud, Ringing tone.
Keypad tones—Use the left and right scroll keys to set the volume of your keypad
tones (or turn them off).
63
S e t t i n g s
Warning tones—Turn warning and confirmation tones on or off
Alert for—Set the phone to alert only when a member of a selected caller group
calls. See "Set up caller groups," p. 28 for more information.
■ Time and date
Clock
Show or hide the clock
In the standby mode, select Menu > Settings > Time and date > Clock > Show
clock or Hide clock.
Set the time
1. In the standby mode, select Menu > Settings > Time and date > Clock > Set
the time.
2. Enter the time (in hh:mm format), and select OK.
3. Select am or pm (this option displays only when 12-hour format is in use).
Change the time zone
In the standby mode, select Menu > Settings > Time and date > Clock > Time
zone and your time zone based on Greenwich Mean Time (GMT), plus or minus
hours in your time zone.
For example, GMT-8 is US Pacific time in Los Angeles, CA. GMT does not include
Daylight savings time, so add or subtract accordingly.
Change the format
In the standby mode, select Menu > Settings > Time and date > Clock > Time
format > 24-hour or 12-hour.
Date
Show or hide the date
In the standby mode, select Menu > Settings > Time and date > Date > Show
date or Hide date.
Set the date
In the standby mode, select Menu > Settings > Time and date > Date > Set the
date, enter the date, and select OK.
64
S e t t i n g s
Change the format
1. In the standby mode, select Menu > Settings > Time and date > Date > Date
format and the format of your choice.
2. With Date on the display, select Date separator, and the separator of your choice.
Set the auto-update of date and time
Auto-update is a network service. See "Network services," p. 6 for more information.
If your wireless service provider supports this feature, you can allow the digital
network to set the clock, which is useful when you are out of your home area (for
example, when you have traveled to another network or time zone).
In the standby mode, select Menu > Settings > Time and date > Auto-update of
date/time > On, Confirm first, or Off.
If you use the Auto-update of date/time option while outside your digital network,
you may be prompted to enter the time manually. Network time will replace the
time and date when you reenter your digital network.
If your battery has been removed or has discharged outside the digital network,
you may be prompted to enter the time manually (once the battery is replaced or
recharged, and you are still outside of the digital network).
■ Call
Location info sharing
Location info sharing sets whether your GPS signal is always on or only in the
case of an emergency call.
In the standby mode, select Menu > Settings > Call > Location info sharing >
Emergency or On.
GPS should not be used for precise location measurement, and you should never
rely solely on location data from the GPS receiver.
This feature is not designed to support positioning requests for related calls.
Contact your service provider for more information about how your phone complies
with government regulations on location based emergency calling services.
Anykey answer
When Anykey answer is on, briefly press any key except the right selection or end
key to answer a call.
In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off.
65
S e t t i n g s
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you once the network is available.
In the standby mode, select Menu > Settings > Call > Automatic redial >On or Off.
1-touch dialing
To activate or deactivate 1-touch dialing, do the following:
In the standby mode, select Menu > Settings > Call > 1-touch dialing > On or
Off. For more information on 1-touch dialing, see "Set up 1-touch dialing," p. 30.
Answer when slide opened
Set your phone to answer a call when you open the slide. If the setting is off, you
must press the call key after you open the slide.
In the standby mode, select Menu > Settings > Call > Answ. when slide opened >
On or Off.
End call when slide closed
Set your phone to end a call when you close the slide. If the setting is off, you
must press the end key after you close the slide.
In the standby mode, select Menu > Settings > Call > End call when slide
closed > On or Off.
Automatic update of service
If supported by your wireless service provider, this feature allows you to set your
phone to automatically receive updates from your network that may improve
service and coverage.
In the standby mode, select Menu > Settings > Call > Automatic update of serv. >
On or Off.
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.
Save information
1. In the standby mode, select Menu > Settings > Call > Calling card.
66
S e t t i n g s
2. Enter your security code or lock code, and select OK. (See "Security," p. 79.)
3. Scroll to one of the four memory locations, and select Options > Edit > OK >
Dialing sequence.
4. Select one of the following sequence types:
Access + phone + card—Dial the access number, the phone number, the card
number and PIN, if required.
Access + card + phone—Dial the access number, the card number and PIN, if
required, then phone number.
Prefix+ phone + card—Dial the prefix (numbers that must precede the
phone number) and phone number you want to dial, then card number and
PIN, if required.
5. Enter the required information (access number or prefix and card number),
and select OK to confirm your entries.
6. Select Card name.
7. Enter the card name, and select OK.
Contact your calling card company for more information.
Make calls
After you have saved your calling card information in your phone, you can make a
call using your calling card.
1. In the standby mode, select Menu > Settings > Call > Calling card.
2. Enter your security code or lock code, and select OK.
3. Scroll to the calling card of your choice, and Select.
4. Press the end key to return to standby mode; then enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold the call key for a few seconds until Card call is displayed.
6. When you hear the tone or system message, select OK.
Data and fax calls
Receive data or fax calls
Data/fax calls is a network service. See "Network services," p. 6 for more information.
If your wireless service provider supports this feature, you can set up the phone to
send or receive data or fax calls when a terminal, such as a PDA or PC, is connected.
67
S e t t i n g s
For better performance during data calls, place the phone on a stationary surface.
Do not move the phone by holding it in your hand during a data call.
For more information on connectivity, refer to the PC/PDA Connectivity Guide.
The PC/PDA Connectivity Guide can be downloaded from the Nokia website at
www.nokiausa.com.
1. In the standby mode, select Menu > Settings > Call > Data/fax calls >
Incoming data/fax call and one of the following:
Normal—The phone receives incoming calls as usual.
Data calls only—The phone receives only data calls.
Fax calls only—The phone receives only fax calls.
2. Select Data calls only or Fax calls only.
3. When you are finished receiving the fax or data call, repeat steps 1 and 2, and
select Normal.
View data transfer
You can view the transmission speed when sending or receiving data or fax calls.
In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate
display > Graphic or Off.
Call summary
Your phone can display the time spent on a call when you hang up.
In the standby mode, select Menu > Settings > Call > Call summary > On or Off.
Show call time on display
Your phone can display the call time during the phone call.
In the standby mode, select Menu > Settings > Call > Show call time on display >
On or Off.
Ringing tone for no caller ID
You can select a different ringing tone for calls received with no caller ID.
In the standby mode, select Menu > Settings > Call > Ring. tone for no caller ID >
On or Off. See "Customize a profile," p. 61 for more information on selecting a
ringing tone.
68
S e t t i n g s
■ Phone language
Language settings
Phone language allows you set the language of the display text seen on the
phone. In the standby mode, select Menu > Settings > Phone > Phone language
and the language of your choice.
Automatic keyguard
Automatic keyguard allows you to automatically lock your phone after a defined time.
In the standby mode, select Menu > Settings > Phone > Automatic keyguard >
On or Off.
Navigation key
If supported by your wireless service provider, you can set the features that are
activated when you press the scroll key.
1. In the standby mode, select Menu > Settings > Phone > Navigation key.
2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select Change.
3. Select a function to assign to the action.
Memory status
You can view the memory usage of your phone or miniSD card. If you do not have
a miniSD card, you will only see the options for your phone memory. Some or all
of the following options are available on your phone.
Phone memory
In the standby mode, select Menu > Settings > Phone > Memory status > Phone
and one of the following possible options.
Free memory—Shows the amount of phone memory available for file storage.
Contacts—Shows the amount of phone memory currently used for Contacts.
Text messages—Shows the amount of phone memory currently used for
Text messages.
My albums—Shows the amount of phone memory currently used for your albums.
Tools—Shows the amount of phone memory currently used for Organizer.
Applications—Shows the amount of phone memory currently used for Applications.
Multimedia msgs.—Shows the amount of phone memory currently used for
Multimedia messages.
69
S e t t i n g s
Card memory
In the standby mode, select Menu > Settings > Phone > Memory status > Card
name and one of the following:
Free memory—Shows the amount of phone memory available for file storage.
Used memory—Shows the amount of phone memory currently used for file storage.
Size—Shows the total amount of phone memory you can use for file storage.
Security keyguard
If supported by your wireless service provider, Automatic keyguard controls
whether the security keyguard is on or off.
In the standby mode, select Menu > Settings > Phone > Automatic keyguard >
On or Off.
Touch tones
Touch tones are the tones that sound when you press the keys on your phone
keypad. You can use Touch tones for many automated dial-up services such as
banking and airlines or for entering your voice mailbox number and password.
Touch tones are sent during an active call. You can send them manually from your
phone keypad, or send them automatically by saving them in your phone.
Set type
In the standby mode, select Menu > Settings > Phone > Touch tones > Manual
touch tones and one of the following:
Continuous—The tone sounds for as long as you press and hold a key.
Fixed—Used to send tones of the duration you specify in the Touch tone length option.
Off—Used to turn off tones. No tones are sent when you press a key.
Set length
You can also specify touch tone length when using the Fixed option.
In the standby mode, select Menu > Settings > Phone > Touch tones > Touch
tone length > Short (0.1 seconds) or Long (0.5 seconds).
Start-up tone
If the Start-up tone is activated, the tone sounds when you turn on your phone. In
the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.
70
S e t t i n g s
Help text activation
Your phone displays brief descriptions for most menu items. When you arrive at a
feature or menu, pause for about 15 seconds and wait for the help text to display.
Scroll to page through the full help text, if necessary.
The default setting for help text is on. However, you can turn help text on or off.
In the standby mode, select Menu > Settings > Phone > Help text activation >
On or Off.
■ Voice commands
You can set up to five Voice commands, which allow hands-free operation of
certain phone features.
Add a voice tag
Before using Voice commands, you must first add a voice tag to the phone function.
1. In the standby mode, select Menu > Settings > Voice commands.
2. Select a function option you wish to tag, and select Add.
3. Select Start, and speak the voice tag clearly into the microphone.
Do not select Quit unless you want to cancel the recording.
The phone replays then saves the recorded tag.
option for which you add a voice tag.
appears next to the function
Activate a voice command
After you have associated a voice command tag with a phone function, you can
issue a command by speaking the voice command tag.
1. In the standby mode, select and hold Names.
2. When Speak now appears, pronounce the voice tag clearly into the microphone.
When the phone finds the voice command tag, Found: appears, and the phone
plays the recognized voice command tag through the earpiece. The function you
requested is activated.
Voice command options
You can modify voice command tags. In the standby mode, select Menu >
Settings > Voice commands, highlight the voice command tag, and select
one of the following options:
Play—Listen to the voice command tag.
Options > Change—Change the voice command tag.
Options > Delete—Erase the voice command tag.
71
S e t t i n g s
■ Connectivity
You can connect the phone to a compatible device using an IR connection. You
can also connect the phone to a compatible PC using IR or a USB data cable; and
use the phone as a modem to enable connectivity from the PC.
For more information, see the Nokia PC Suite online help. Nokia PC Suite and all
related software can be downloaded from the U.S. Mobile Phone products
Important: Only install and use applications and other software from sources
that offer adequate security and protection against harmful software.
Bluetooth connectivity
Bluetooth technology connectivity enables cost-free wireless connections
between electronic devices and can be used to send and receive images, texts,
gallery files, voice recordings, video clips, notes, business cards, and calendar
notes. It can also be used to connect wirelessly to products that use Bluetooth
wireless technology, such as computers. You can synchronize your phone and
your PC using Bluetooth connectivity.
Since devices with Bluetooth connectivity communicate using radio waves, your
phone and the other device do not need to be in direct line-of-sight.
The two devices only need to be within a maximum of 30 feet (10 meters) of each
other. The connection can be subject to interference from obstructions such as
walls or other electronic devices.
The Bluetooth wireless technology application whether used actively or in the
background, consumes the battery and reduces the operating time of the phone.
This device is compliant with Bluetooth Specification 1.2 and supports the
following profiles:
•
•
•
•
•
•
•
•
Object push profile (OPP)
File transfer profile (FTP)
Dial-up networking profile (DUN)
Generic object exchange profile (GOEP)
Headset profile (HSP)
Hands-free profile (HFP)
Generic access profile (GAP)
Serial port profile (SPP)
72
S e t t i n g s
Note: The Nokia 6265i offers integrated Bluetooth wireless support for
data transfer. Please note that most commercial audio and video content,
such as MP3 mastertracks and ringtones, are copy-protected with Digital
Rights Management technology. The Bluetooth software used in the
Nokia 6265i recognizes and respects such copy protection, and does not
allow the Bluetooth transfer of such material.
To ensure interoperability between other devices supporting Bluetooth technology,
use Nokia approved enhancements for this model. Check with the manufacturers
of other devices to determine their compatibility with this device.
There may be restrictions on using Bluetooth technology in some locations.
Check with your local authorities or service provider. If you want more information
on this function, visit the Bluetooth Technology organization website:
Pairing
You can set up a permanent association (pairing) between your phone and another
device with Bluetooth technology. Some devices may require pairing before data
transfer can take place.
To pair with a device, you and the owner of the other device must agree on a pass
code of 1–16 numeric characters. The first time you try to connect the devices,
you must each enter the same pass code. Once the devices are paired, you will
not need to use the pass code again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Paired devices > Options and one of the following:
Assign short name—Give a nickname to the selected device (visible to you only).
Request conn. authorization—Select No if you want the phone to connect to the
selected device automatically or Yes if you want the phone to ask for your
permission first.
Delete pairing—Delete the pairing to the selected device.
Pair new device—Search for active devices with Bluetooth technology within
range, scroll to the desired device, and select Pair to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
73
S e t t i n g s
Bluetooth connectivity settings
You can define how your phone is shown to other devices with Bluetooth connectivity.
In the standby mode, select Menu > Settings > Connectivity > Bluetooth >
Bluetooth settings and one of the following:
My phone's visibility—SelectShown toall to show the phone to all other devices with
Bluetooth connectivity or Hidden to show the phone only to the paired devices.
Operating the phone in hidden mode is a safer way to avoid malicious software.
My phone's name—Change your phone name that is seen by other users.
Set up a connection
1. In the standby mode, select Menu > Settings > Connectivity > Bluetooth > On.
The active Bluetooth technology connection is indicated by
the display.
at the top of
2. Select Search for audio enhanc. to search for compatible devices with
Bluetooth connectivity. The list of found devices appears in the display.
3. Select the desired device.
4. If required, enter the Bluetooth connectivity pass code of the device to pair
with the device.
Your phone connects to the device. You can start data transfer.
To view the device you are connected to, select Menu > Settings > Connectivity >
Bluetooth > Active device.
To deactivate Bluetooth connectivity, select Menu > Settings > Connectivity >
Bluetooth > Off. Deactivation of the Bluetooth technology connection will not
affect other functions of the phone.
Send data
Instead of using the Connectivity menu, you can use other phone menus to send
various types of data to other devices with Bluetooth connectivity. For example,
you can send a video clip from the Video clips folder of the My albums menu.
See the appropriate sections of the user guide for information about sending
different types of data.
Receive a data transfer
When a Bluetooth technology connection is active in your phone, you can receive
notes, business cards, video clips, and other types of data transfers from another
device with Bluetooth connectivity. When you receive a data transfer, an alarm
sounds, and a message appears in the start screen.
74
S e t t i n g s
To view the transferred item immediately from standby mode, select Show. To
view the item at a later time, select Exit.
Depending on the nature of the item, it is saved in the appropriate menu in your
phone. For example, a business card would be saved in Contacts, and a calendar
note would be saved in Calendar.
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, transmission and reception must be to or from an IR compatible
phone or device.
Warning: Do not point the IR beam at anyone’s eye or allow it to
interfere with other IR devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing at
each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
3 inches to 3 feet.
2. To activate IR in your phone, select Menu > Settings > Connectivity > Infrared.
3. The user of the other device should activate IR as well.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is cancelled and must be restarted.
Connection indicator
•
When
is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
When blinks, your phone is trying to connect to the other device or a
connection has been lost.
•
Data cable transfer
You can transfer data from your phone to a compatible PC, or from a compatible PC
to your phone using a CA-53 USB data cable. To activate the USB data cable connect
the USB cable and select Menu > Settings > Connectivity > USB data cable
Important: Disconnect the USB data cable from the phone to make a call.
75
S e t t i n g s
Enable default mode connection
Connect to your PC in Default mode to transfer phone data and files between
your phone and PC using Nokia’s PC Suite.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Default mode. A notification appears on the display stating a
connection is active.
You can now use PC Suite to connect to your phone.
Enable data storage connection
Connect to your PC in Data storage mode to transfer music, photo, and video files to
the phone miniSD card, and from the phone miniSD to your PC with Windows Explorer.
1. Connect your PC and your phone with a CA-53 USB data cable. A notification
appears on the display that asking which mode you want to select.
2. Select Accept > Data storage. The notification Data storage mode displays
while the phone is in data transfer mode.
3. Open Windows Explorer. Your phone miniSD card will appear as a local drive
(named by Nokia 6265i), and with a drive letter assigned to it.
4. Click on the folders to display a window that shows the contents of the folder
on the phone miniSD card.
5. Open a second instance of Windows Explorer and display the contents of the
folder on your PC where you have MP3 files, photo files, or video files stored.
6. Select the files on your PC that you wish to transfer to the phone.
7. Drag and drop the files from the second window into the first window and
place in a folder.
8. The files are transferred to the phone and can be played by the Music player,
or accessed by the Media player.
If you selected a file or files that require more memory than can fit on the available
phone memory, you will get an error note. Deselect some of your selected files until
the required memory is less than or equal to the available memory on your phone.
Disable data storage connection
1. To disable the USB data cable, double-click the green arrow on the task bar at
the bottom of your PC screen.
A window pops up that shows Unplug or Eject Hardware.
2. Click on USB Device in the Hardware devices window.
A popup window shows Stop a Hardware device.
76
S e t t i n g s
3. Highlight USB device, and click OK.
The popup window Safe to Remove Hardware is shown with the message
"The ‘USB Device’ device can now be safely removed from the system."
4. Click OK.
Important: To ensure that all memory card operations are completed in a
controlled way, do not unplug the connectivity cable until Windows notifies
you that it is safe to do so. Uncontrolled completion or unexpected
disruptions of the memory card operations may cause the memory card and
the information stored on it to become corrupted. A corrupted memory
card may have to be formatted before it can be used again. When a
memory card is formatted, all information on the card is permanently lost.
Data and fax transfer
You can make data and fax transfers during a phone call. For more information,
see "Data and fax calls," p. 67.
■ Enhancement settings
The Enhancements menu displays the hearing aid compliant option by default, but
shows other options only if the phone is or has been connected to a compatible
enhancement type.
Headset
In the standby mode, select Menu > Settings > Enhancements > Headset and
one of the following:
Default profile—Choose the profile you wish to be automatically activated when
a headset is connected.
Automatic answer—Calls are answered automatically (if Settings > Profiles >
(Profile name) > Customize > Incoming call alert is set to Ringing, Ring once, or
Ascending) after one ring when a headset is connected. Select On or Off.
Handsfree
In the standby mode, select Menu > Settings > Enhancements > Handsfree and
one of the following:
Default profile—Choose the profile you wish to be automatically activated when
a car kit is connected.
Automatic answer—Calls are answered automatically (if Settings > Profiles >
Incoming call alert > Ring once or Ringing is selected) after one ring when a car
kit is connected. Select On or Off.
77
S e t t i n g s
Lights—Choose to keep the phone lights always on, or to shut off automatically
after several seconds. Select On or Automatic.
Loopset
A LPS-4 Loopset accessory allows your device to optimize sound quality when
coupled with a hearing aid that is set to T-coil mode.
In the standby mode, select Menu > Settings > Enhancements > Loopset and one
of the following:
Default profile—Choose the profile you wish to be automatically activated when
a loopset is connected.
Automatic answer—Calls are answered automatically after one ring when a
loopset is connected. Select On or Off.
If the Loopset is connected and recognized through the Pop-Port™ connector, the
phone automatically uses the Loopset.
TTY/TDD
Check with the manufacturer of the TTY/TDD device for a connecting cable that is
compatible with your phone.
TTY/TDD communications depend on network availability. Check with your
service provider for availability and description of services.
In the standby mode, select Menu > Settings > Enhancements > TTY/TDD > Use
TTY > Yes or No.
Charger
In the standby mode, select Menu > Settings > Enhancements > Charger and
one of the following:
Default profile—Select the profile you want to automatically activate when your
phone is connected to the charger.
Lights— Select On or Automatic to keep the phone lights always on or to shut off
automatically after several seconds.
Hearing aid
To optimize sound quality, you can set your phone to couple to a T-coil-equipped
hearing aid.
In the standby mode, select Menu > Settings > Enhancements > Hearing aid >
T-coil hearing aid mode. Select On to activate. Verify that the hearing aid is set to
T-coil mode, and hold the phone against the ear.
Only activate the T-coil hearing aid mode when using your device with a hearing
aid or it may impact the audio performance of the device.
78
S e t t i n g s
■ Security
To access Security for the first time, you must enter the preset lock code. By default,
the preset lock code is the last four digits of your phone number. Depending on your
wireless service provider, the preset lock code may be a four digit number such as
1234 or 0000. If none of these work, contact your wireless service provider for help.
Phone lock
The phone lock feature protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the phone. When phone lock is
activated, Phone locked is displayed each time you turn your phone on.
When the device is locked, you can still call the official emergency number
programmed into your phone.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Phone lock and one of the following:
Off—Immediately turns off the phone lock feature.
Lock now—Immediately turns on the phone lock feature.
On power-up—Turns on the phone lock feature the next time you turn the
phone on.
If you select Lock now, you must enter your lock code before the phone will
function normally. After the lock code is accepted, your phone functions normally.
Call not allowed appears if you attempt to place a call while your phone is locked.
To answer a call with phone lock on, select Answer, or press the call key.
Note: Depending on your wireless service provider, your phone may ask
for the security code (defaulted to 12345) instead of the lock code.
Allowed number if lock active
With phone lock on, the only outgoing calls you can make are to the emergency
number programmed into your phone (for example, 911) and the numbers stored
in the Allowed no. if lock active location.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Allowed no. if lock active > Assign.
4. Enter the phone number, or select Search to retrieve the number from the
phone book; select OK.
To place a call to an allowed number when the phone is locked, enter the allowed
number and press the call key.
79
S e t t i n g s
Change lock code
When changing the lock code, avoid using codes similar to emergency numbers
such as 911 to prevent accidental dialing of an emergency number.
By default, the preset lock code is the last four digits of your phone number.
Depending on your wireless service provider, the preset lock code may be a
four-digit number such as 1234 or 0000. If none of these work, contact your
wireless service provider for help.
If you enter an incorrect lock code five times in a row, your phone may ask you for
the security code. By default, the security code is the five-digit number, 12345.
Note: If you enter the wrong lock code five times in succession, your
phone will not accept your current lock code for 5 minutes. This occurs
even if when you power down the phone between incorrect attempts.
To change the phone lock code, do the following:
1. In the standby mode, select Menu > Settings > Security.
2. Enter the current lock code, and select OK.
3. Select Change lock code.
4. Enter the new lock code (only 4 characters), and select OK.
5. Enter the new lock code again for verification, and select OK.
When you change your lock code, make sure to remember it. If necessary, write it
down and store it in a safe place away from your phone. Avoid entering a lock
code similar to emergency numbers to prevent accidental emergency calls.
Call restrictions
Call restrictions allows you to block or allow numbers for incoming or outgoing calls.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Call restrictions and the type of calls you wish to restrict:
Restrict outgoing calls—Set restrictions on making calls.
Restrict incoming calls—Set restrictions on receiving calls.
4. Select whether to block or allow numbers:
Blocked numbers—Set numbers that are blocked on incoming calls, allowing
all other numbers. When a number is blocked, the call is sent to voice mail.
Allowed numbers—Set numbers that are allowed, blocking all other numbers.
80
S e t t i n g s
5. To modify the restriction list, select from the following options:
Select—Add numbers to the restriction list.
Add restriction—Add a restriction to a number (unavailable if memory is full).
Edit—Edit a restriction on a number.
Delete—Delete a number from restriction list.
When calls are restricted, calls may be possible to the official emergency number
programmed into your device.
Voice privacy
Voice privacy is a network service, and its function depends on a variety of
services. Contact your service provider for more information.
If your wireless service provider supports this feature, the voice privacy feature
protects the privacy of your current phone conversation from other callers
placing phone calls on your same network.
1. In the standby mode, select Menu > Settings > Security.
2. Enter the lock code, and select OK.
3. Select Voice privacy > On or Off.
■ Application settings
The Application settings menu changes game and application settings.
In the standby mode, select Menu > Settings > Application settings and one of
the following:
Application sounds > On or Off—Play sounds during an application.
Application lights > Application defined or Default—Play lights during an application.
Application vibration > On or Off—Vibrate phone during an application.
■ Network
The menu options you see in your phone are based on your service provider’s
network. The network determines which options actually appear in the phone
menu. Check with your service provider for more information.
The Network menu customizes the way your phone chooses a network in which
to operate while you are within or outside of your primary or home system. Your
phone is set to search for the most cost-effective network. If your phone cannot
find a preferred network, it selects a network automatically based on the option
you choose in the Network menu.
81
S e t t i n g s
Roaming options
If supported by your wireless service provider, you can select which roaming option
you wish to use. In the standby mode, select Menu > Settings > Network > Roaming
options and the following.
Home only—You can make and receive calls in your home area only.
Mode
If supported by your wireless service provider, you can choose whether your
phone will use digital or analog service. In the standby mode, select Menu >
Settings > Network > Mode and one of the following.
Digital preferred—You prefer to make calls on a digital network, but will find
another network, if necessary.
Digital only—You can make and receive calls on a digital network only.
Analog only—You can make and receive calls on an analog network only.
■ Network services
The following features are network services. See also "Network services," p. 6.
Store a feature code
Network feature setting allows you to activate network services in your phone using
feature codes received from your service provider.
1. In the standby mode, select Menu > Settings > Network services > Network
feature setting.
2. Enter the feature code from your service provider (for example, *900 for
activating Forward if busy), and select OK.
3. Select Call forwarding.
4. Scroll to the type of forwarding that matches the feature code you entered
(for example, Forward if busy), select Activate.
The activated feature code is now stored in your phone, and you are returned to
the Feature code: prompt. Continue entering other feature codes (for example,
*900 to cancel Forward if busy), or press the end key to return to standby mode.
When you enter a network feature code successfully the feature becomes visible
in the Network services menu.
82
S e t t i n g s
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability and information.
To activate, do the following:
1. In the standby mode, select Menu > Settings > Network services > Call
forwarding and one of the following:
Forward all calls—Forwards all calls to the number you specify.
Forward if busy—Forward incoming calls when you are in a call.
Forward if not answered—Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach—Forward incoming calls when your phone is off.
2. Select Activate.
3. Enter the number to which your calls, data, or other information are
forwarded, and select OK.
To cancel, in the standby mode, select Menu > Settings > Network services > Call
forwarding > Cancel all call forwarding.
Cancel all call forwarding may affect your ability to receive voice mail messages.
Contact your wireless provider for specific details.
Call waiting
Call If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the
incoming call.
To activate, in the standby mode, select Menu > Settings > Network services >
Call waiting > Activate.
During a call, select Answer or press the call key to answer the waiting call. The
first call is put on hold. Press the end key to end the active call.
To cancel, in the standby mode, select Menu > Settings > Network services > Call
waiting > Cancel.
Send my caller ID
If your wireless service provider supports this feature, you can prevent your number
from appearing on the receiving party’s caller ID.
In the standby mode, select Menu > Settings > Network services > Send my
caller ID > Yes or No.
83
S e t t i n g s
My number selection
In the standby mode, select Menu > Settings > Network services > My number
selection. This feature is carrier dependent.
■ Restore factory settings
You can reset some of the menu settings to their original values. Data that you
have entered or downloaded is not deleted (for example, entries in your contacts
list are not affected).
1. In the standby mode, select Menu > Settings > Restore factory sett.
2. Enter the lock code, and select OK.
Note: Depending on your wireless service provider, your device may
request the security code (defaulted to 12345) instead of the lock code.
■ Phone details
You can view the current details of your phone. In the standby mode, select
Menu > Settings > Phone details and one of the following options:
User details—Shows the phone’s current number details.
Version details—Shows the hardware, software and browser version information
for the phone.
System details—Shows the digital network the phone is on.
Icon details—Shows the icons used.
84
G a m e s
&
A p p s
12. Games & Apps
■ Games
Depending on your service provider, games and other applications may be
preloaded on your phone.
Select games
In the standby mode, select Menu > Games & Apps > Games to display the games
on your device.
Memory status
You can view the memory available for game installations. In the standby mode,
select Menu > Games & Apps > Games >Options > Memory status.
■ Collection
Select application
In the standby mode, select Menu > Games & Apps > Collection > select application.
Scroll to an application and select Open, or press the call key.
An application may require a few seconds to load. When you open an application,
wait for the launch screen to disappear. At that point, the application is ready.
Leaving applications running in the background increases the demand on battery
power and reduces the battery life.
Note: Only install applications from sources that offer adequate protection
against harmful software.
Memory status
You can view the memory available for application installations. In the standby
mode, select Menu > Games & Apps > Collection > Options >Memory status.
85
C a m e r a
13. Camera
You can take photos and record video clips with the built-in camera and adjust
its settings. The camera lens is on the back of the phone.
The camera produces photos in JPEG format and video clips in H.263 (QCIF) format.
After you take a picture or video, you can attach it to a multimedia message, send it
as a multimedia message, save it as a wallpaper, save it to a compatible PC using
Nokia PC Suite software, and upload it to a Web address with the content image
uploader. When you attach a picture to a contact, the picture is displayed when the
contact calls you.
If there is not enough memory to take a new photo, delete old photos or other files
in the My albums, or move photos onto your miniSD card. See "MiniSD card," p. 16.
This device supports an image capture resolution of 1600 x 1200 pixels and displays
a 320 x 240 pixel resolution on the display. The image resolutions in these materials
may appear different.
Keep a safe distance when using the flash. Do not use the flash on people or animals
at close range. Do not cover the flash while taking a picture.
When the phone is in camera mode, the interface will switch from portrait
to landscape. Turn the phone on its side to use the camera and view the
available options.
■ Take a photo
You can use your camera to take photographs. To take a picture, complete the
following steps:
1. In the standby mode, press
the camera key or select
Menu > Camera. This
activates the camera. The
display is now landscape.
If you are in Video mode,
select Options > Still
image to switch to Still
image mode.
86
C a m e r a
2. To take a picture, press the camera key or select
Capture to take the photo. Press the volume key
displayed here or the scroll keys to zoom in and out.
When taking a photo, a shutter sound is heard.
The phone saves the photo in the Images folder
of the My albums menu. The saved photo is shown
on the display. Pictures can be saved directly to the
miniSD. See "Image and video storage," p. 90.
3. Select Back to take another photo, Delete to erase the photo, or Options and
one of the following:
Zoom—Zoom in on a captured photo; scroll to navigate around the photo.
New image—Returns to camera mode.
Send > Via multimedia, Via Bluetooth, or Via infrared—Send a photo to a
compatible phone or PC.
Attach to contact—Attach the photo to a contact.
Rename—Edit the name of the photo.
Open My albums—Open the My albums, where photos are saved.
Set contrast—Scroll to adjust the contrast of the photo.
Edit image—Opens the photo for editing.
Use image > Set as wallpaper, Set as screen saver, or Set as contact image—
Use the photo.
Details > View details of the photo.
■ Use the self-timer
You can use the camera self-timer to delay taking a photo for approximately
10 seconds.
1. In the standby mode, select Menu > Camera > Options > Self-timer on.
2. Select Start.
A beep sounds while the self-timer is running, and beeps faster when the
camera is about to capture the photo. After the time-out, the camera takes
the photo and saves it to the Images folder of the My albums menu.
■ Take a sequence of photos
You can use the camera image sequence option to take up to four photos in quick
succession.
1. In the standby mode, select Menu > Camera > Options > Img. sequence on.
87
C a m e r a
2. Select Sequence.
The camera take five photos in sequence. After the photos are taken, the
camera saves them to a folder in the Images folder of the My albums menu.
■ Record a video
1. In the standby mode, press the camera key or select Menu > Camera.
This activates the camera. The display is now landscape.
If you are in Still image mode, select Options > Video to switch to Video mode.
2. Select Record to begin recording the video clip.
While you are recording, the indicator and the remaining recording time are
shown at the top of the display.
3. Select Pause to pause the recording, Continue to resume the recording, or
Stop to stop the recording.
The phone saves the video clip in the Video clips folder of the My albums menu.
4. Select Back to take another video clip, Play to play the video clip, or Options
and one of the following.
Delete—Delete the video clip from the My albums.
New video clip—Returns to video mode.
Send > Via multimedia, Via infrared, or Via Bluetooth—Send the video clip to
a compatible phone or PC.
Rename—Edit the name of the video clip.
Open My albums—Opens the My albums, where video clips are saved.
Mute audio or Unmute audio—Turn the video clip sound on or off.
Set contrast—Use the scroll keys to adjust the contrast of the video clip.
Use video clip > Set as screen saver—Use the video clip.
Details—View details of the video clip.
■ Camera options
In the standby mode, select Menu > Camera > Options and from the following:
Still image or Video—Choose camera mode to take a picture or record a video.
Mute audio or Unmute audio—Turn the sound on or off for the video clip. Option
only appears when camera is in video mode.
Night mode on or Night mode off—Switches the camera night mode on and off.
Flash on or Flash off—Turns the camera flash on and off.
Self-timer on or Self-timer off—Turns the self-timer on and off. This option only
appears in still image mode.
88
C a m e r a
Img. sequence on or Img. sequence off—Turns image sequencing on or off. The
pictures are then saved to My albums. This option only appears in still image mode.
View previous—View the previous photo or video taken. This option only appears
when a photo has been taken during that session.
Open My albums—Open the My albums to view saved images, videos, and recordings.
Settings—Change the settings for the phone camera.
■ Modify camera settings
Image quality
Define file compression when saving the image. High-quality images have less
file compression and provide the best image quality, but take more memory.
In the standby mode, select Menu > Camera > Options > Settings > Image
quality > High, Normal, or Basic.
Image size
Set the size of an image when taking a picture. A larger image has better
resolution, but takes more memory.
In the standby mode, select Menu > Camera > Options > Settings > Image size
and a resolution size.
Video clip quality
Define file compression when saving the video clip. High-quality video clips have
less file compression and provide the best image quality, but take more memory.
In the standby mode, select Menu > Camera > Options > Settings > Video clip
quality > High, Medium, or Low.
Video clip length
You can change the maximum length of a video clip. The maximum size of a video
clip can be 600 KB. A recording will stop once it reaches the maximum size, even
if the maximum length is set longer. Only video clips that are default length or
shorter can be sent in a multimedia message.
In the standby mode, select Menu > Camera > Options > Settings > Video clip
length > Default or Maximum.
89
C a m e r a
Camera sounds
You can turn off the camera sounds that happen when a picture is taken or video
recorded.
In the standby mode, select Menu > Camera > Options > Settings > Camera
sounds > On or Off.
Self-timer lights
You can turn off the self-timer lights that appear when a picture is taken.
In the standby mode, select Menu > Camera > Options > Settings > Self-timer
lights > On or Off.
Default title
You can change the default title your phone uses to assign names to new photos
and video clips.
In the standby mode, select Menu > Camera > Options > Settings > Default
title > Automatic or My title. If you select My title, enter new text upon which
filenames the phone creates are based on.
Image and video storage
You can change where your phone camera stores files.
In the standby mode, select Menu > Camera > Options > Settings > Image and
video storage > Default folder or Other folder. If you select Other folder, locate
the new location.
Default mode
You can change the default mode of your phone camera.
In the standby mode, select Menu > Camera > Options > Settings > Default
mode > Standard photo or Video.
90
T o o l s
14. Tools
Your phone contains features to help organize your everyday life, including an
alarm clock, calendar, calculator, countdown timer, and stopwatch.
■ Alarm clock
Set an alarm
The alarm clock is based on the phone clock. It sounds an alert any time you
specify and even works if the phone is turned off.
1. In the standby mode, select Menu > Tools > Alarm clock > Alarm time.
2. Enter the time for the alarm in hh:mm format, and select OK.
3. Select am or pm if 12-hour clock format is on.
Alarm on appears briefly in the display, and
appears in the standby mode.
If you need to reset the alarm select Menu > Tools > Alarm clock > Alarm time >
On from the standby mode.
To turn off the alarm, select Menu > Tools > Alarm clock > Alarm time > Off from
the standby mode.
Repeat alarm
You can set the alarm to repeat every day or only on certain days of the week.
1. In the standby mode, select Menu > Tools > Alarm clock > Repeat alarm > On.
2. Check the day or days of the week you wish to repeat the alarm, and select
Mark. Select Unmark to remove a day.
3. Select Done when you have added all desired days.
If you need to revise the days for a repeated alarm, select Menu > Tools > Alarm
clock > Repeat alarm > Repetition days from the standby mode.
If you need to stop a repeated alarm, select Menu > Tools > Alarm clock > Repeat
alarm > Off in the standby mode.
Set the alarm tone
You can set which tone is played when the alarm sounds.
91
T o o l s
In the standby mode, select Menu > Tools > Alarm clock > Alarm tone and one of
the following:
Standard—Select the default alarm.
Radio—Select the radio as the alarm.
Open My albums—Select a tone from the My albums as the alarm.
Set the snooze time-out
You can set the Snooze time-out for the alarm.
In the standby mode, select Menu > Tools > Alarm clock > Snooze time-out and
choose a snooze time.
When the alarm sounds, your phone beeps, vibrates (if vibrate alert is on in the
currently active profile), and lights up.
With the phone on, select Stop to shut the alarm off or Snooze. If you select
Snooze, the alarm stops for 10 minutes.
If you do not press a key, the alarm stops (snoozes) for the Snooze time-out, then
sounds again.
If the alarm time is reached while the phone is switched off, the phone switches
itself on and starts sounding the alarm tone. If you select Stop, the device asks
whether you want to activate the phone for calls. Select No to switch off the
device or Yes to make and receive calls. Do not select Yes when wireless phone
use may cause interference or danger.
Turn an alarm off
In the standby mode, select Menu > Tools > Alarm clock > Alarm time > Off.
■ Calendar
The calendar keeps track of reminders, calls you need to make, meetings, memo,
and birthdays. It can even sound an alarm for any of these events.
Monthly view provides an overview of the selected month and weeks. You can
also jump to a specific date. Any days or dates that appear in bold font contain
calendar notes such as a meeting or reminder. A short summary of notes for the
day appear at the bottom of the screen.
Open calendar
In the standby mode, select Menu > Tools > Calendar.
Scroll to move the cursor in the calendar view.
92
T o o l s
Calendar options
In the standby mode, select Menu > Tools > Calendar > Options and one of
the following:
Week view—View your calendar by weeks. To return to month view select Back,
while in the Week view.
Make a note—Create a note on the selected date.
Go to date—Jump to a specific date. Enter the date (for example, 15/07/2005),
and select OK.
Go to today—Jump to the current date.
Settings—Modify the calendar settings.
Go to to-do list—Go directly to your to-do list.
Delete all notes—Delete all calendar notes.
Make a calendar note
You can make a calendar note for a specific date. You can choose from five types
of notes. Your phone asks for further information depending on which note you
select. You can also set an alarm for your note.
1. In the standby mode, select Menu > Tools > Calendar.
2. Highlight the date for which you want to make a note. Scroll or select
Options > Go to date.
3. Select Options > Make a note and one of the following
Meeting—Enter the subject, and select Save. Enter a location, and select Save.
Enter a start and end time. Choose an alarm option.
Call—Enter the phone number, and select Save. Enter a name, and select
Save. Enter a time. Choose an alarm option. You can also select Options >
Search to search your contacts.
Birthday—Enter the person’s name, and select Save. Enter the year of birth.
Choose an alarm option.
Memo—Enter the subject, and select Save. Enter an start and end date.
Choose an alarm option.
Reminder—Enter the reminder, and select Save. Choose an alarm option.
View calendar notes (day view)
You can view the calendar notes for a day.
93
T o o l s
1. In the standby mode, select Menu > Tools > Calendar.
2. Scroll to the date you want to view or select Options > Go to date. Days with
notes appear in bold type.
3. Select View to see the list of notes for that day.
To view a specific note, highlight the note, and select View again. If there are no
notes for that date, select Add to create a new calendar note.
Options while viewing a day
When viewing a day’s list of notes, you can highlight a note, select Options and
one of the following:
Make a note—Create a new note for the selected date.
Delete—Delete the note.
Edit—Edit the note.
Use detail—Use a detail contained in the note.
Move—Move the note to another date on your calendar.
Repeat—Enable the note to recur on a regular basis (daily, weekly, biweekly,
monthly, and yearly). Repeat is not available for Birthday note.
Go to date—Jump to another date on your calendar.
Go to today—Return to the current date.
Send note > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send a
calendar note in calendar format (vCal), in a text message, in a multimedia message,
or directly to another device.
Copy—Copy the note. You can paste the note to another date.
Settings—Modify the calendar settings.
Go to to-do list—Go directly to your to-do list.
Send a calendar note
1. In the standby mode, select Menu > Tools > Calendar.
2. Highlight the note you wish to send, and select Options > Send note > Send
as message, Via calendar, Via infrared, or Via Bluetooth to send the calendar
note in calendar format (vCal), in a text message, in a multimedia message, or
directly to another device.
94
T o o l s
Receive a note in calendar format (vCal)
When you receive a calendar note in calendar-to-calendar format (vCal), your
phone displays Calendar note received.
Select Show to view the calendar note. Select Save to save the note to your
calendar or Options > Discard to discard the note.
Modify calendar settings
In the standby mode, select Menu > Tools > Calendar > Options > Settings and
one of the following:
Set the date—Enter the current date, and select OK.
Set the time—Enter the current time, and select OK.
Time zone—Select your current time zone.
Date format—Select your preferred date format.
Date separator—Select your preferred date separator.
Time format—Select your preferred time format.
Default view—Select a monthly or weekly view.
Week starts—Select the day the week starts.
Auto-delete notes—Select when to delete past notes.
■ Notes
You can write text notes with the Notes. You can also send notes using text
message, IR, or Bluetooth connectivity.
Open notes
In the standby mode, select Menu > Tools > Notes. You see your current list of notes.
If there are no notes, select Add to create your first note. If there are existing
notes, highlight a note, and select View.
Make a note
Initial note
In the standby mode, select Menu > Tools > Notes > Add. Create your note, and
select Save.
Additional notes
In the standby mode, select Menu > Tools > Notes > Options > Make a note.
Create your note, and select Save.
95
T o o l s
Create note options
When you create a note, the following options are available:
Insert time and date—Adds the time and date to your note.
Close—Returns you to the notes list.
Insert smiley—Inserts a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not appear
in the predictive text dictionary. Option only appears when predictive text is on.
Insert symbol—Inserts a special character into your message. Option only appears
when predictive text is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Send a note
1. In the standby mode, select Menu > Tools > Notes.
2. Highlight the note you wish to send, and select Options > Send note > Send
as message, Via infrared, or Via Bluetooth to send the note in a text message,
in a multimedia message, or directly to another device.
Notes options
In the standby mode, select Menu > Tools > Notes > Options and one of
the following:
Make a note—Create a new note.
Delete—Delete the note you selected.
Edit—Edit the note you selected.
Use detail—Use a detail contained in the note.
Send note > Send as message, Via infrared, or Via Bluetooth—Send a note in a
text message, in a multimedia message, or directly to another device.
Delete all notes—Delete all notes.
The note options appear only when you have created one or more notes.
■ To-do list
Use the To-do list feature to keep track of your tasks. You can save a task or errand as
a to-do list note, select a priority level for the to-do list note, and mark it as done
when you have completed it. You can sort the to-do list notes by priority or by date.
96
T o o l s
Open to-do list
In the standby mode, select Menu > Tools > To-do list. You see your current to-do list.
If there are no to-do tasks, select Add to create your first to-do list note. If there
are existing to-do list notes, highlight a to-do list note, and select View.
Make a to-do list note
Initial to-do list note
In the standby mode, select Menu > Tools > To-do list > Add. Enter the subject,
and select Save > High, Medium, or Low.
Additional to-do list notes
In the standby mode, select Menu > Tools > To-do list > Options > Add. Enter the
subject, and select Save > High, Medium, or Low.
Create to-do list note options
When you create a to-do list note, the following options are available:
Insert smiley—Insert a smiley into your message.
Insert word or Edit word—Enter or edit the text of a new word that might not appear
in the predictive text dictionary. This displays only when predictive text is on.
Insert symbol—Insert a special character into your message. This displays only
when predictive text is on.
Writing language—Choose the language you want to use.
Dictionary on or Dictionary off—Turn predictive text on or off.
Matches—View matches found in the predictive text dictionary for the word you
want to use. This displays only when predictive text is on.
Edit to-do list notes
In the standby mode, select Menu > Tools > To-do list > View > Edit. Edit the
subject, select Save.
View to-do list notes
In the standby mode, select Menu > Tools > To-do list > View.
Deadline—Change the deadline of the to-do list note.
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed or not.
Delete—Delete the to-do list note.
Use detail—Use a detail contained in the note.
97
T o o l s
Edit priority—Change the priority to High, Medium, or Low.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do list note in calendar format (vCal), in a text message, in a multimedia
message, or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note to your calendar.
Send a to-do list note
1. In the standby mode, select Menu > Tools > To-do list.
2. Highlight the note you wish to send, and select Options > Send > Send as
message, Via calendar, Via infrared, or Via Bluetooth to send the to-do list
note in calendar format (vCal), in a text message, in a multimedia message, or
directly to another device.
To-do list options
In the standby mode, select Menu > Tools > To-do list > Options and one of
the following:
Add—Create a new to-do list note.
Delete—Delete the to-do list note you selected.
Mark note as done or Mark as not done—Indicate whether the to-do list note is
completed or not.
Use detail—Use a detail contained in the note.
Sort by deadline or Sort by priority—Sort the to-do list by either date or priority.
Send > Send as message, Via calendar, Via infrared, or Via Bluetooth—Send the
to-do list note in calendar format (vCal), in a text message, in a multimedia
message, or directly to another device.
Go to calendar—Leave the to-do list, and go to the calendar.
Save to calendar—Save the to-do list note you selected to your calendar.
Delete done notes—Delete the to-do list note you selected to your calendar.
Delete all notes—Delete all to-do list notes.
The to-do list options appear only when you have created one or more notes.
■ Calculator
The calculator in your phone adds, subtracts, multiplies, divides, calculates the
square and the square root, changes the sign of the number entered, and
converts currency values.
98
T o o l s
Note: This calculator has a limited accuracy and is designed for simple
calculations.
Use calculator
1. In the standby mode, select Menu > Tools > Calculator.
2. Enter the first number in the calculation.
Press # for a decimal point if necessary.
Press the scroll key up or down to change the sign of your number or value.
Press * to cycle through the add (+), subtract (-), multiply (*), and divide (/)
characters. Pause briefly to select the displayed character.
3. Enter the second number in your calculation.
4. Select Equals.
To perform a square or square root calculation, select Options > Square or Square root.
Currency converter
You can convert foreign currency to domestic, or vice versa, directly from the
standby mode or from the Calculator menu.
Note: When you change base currency, you must enter the new rates
because all previously set exchange rates are set to zero.
1. In the standby mode, select Menu > Tools > Calculator > Options > Exchange
rate > Foreign units in home or Home units in foreign.
Foreign units in home—The number of home units it takes to make one unit of
foreign currency.
Home units in foreign—The number of foreign units it takes to make one unit
of your home currency.
2. Enter the exchange rate (press # to insert a decimal), and select OK.
3. Select Back to return to the Calculator screen, and enter the currency amount
to convert.
4. Select Options > To home or To foreign.
To home—converts foreign currency to domestic currency.
To foreign—converts domestic currency to foreign currency.
5. If you have not already entered an exchange rate, the device prompts you to
enter it. Select OK. You can edit the exchange rate at any time.
99
T o o l s
■ Countdown timer
The countdown timer in your device enables you to enter a specific time (up to 99
hours, 59 minutes, and 59 seconds). When the time runs out, your device sounds
an alarm.
The countdown timer only works when the phone is on. Once you turn off your
phone, the timer is no longer active.
Set the normal timer
1. In the standby mode, select Menu > Tools > Countdown timer.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
and the timer (in hh:mm:ss format) appear in the standby mode when the
countdown timer is running.
When the time runs out, your phone sounds an alarm, vibrates, and flashes its lights.
If you are in standby mode, select Restart or Exit. If you are not in the standby
mode, press any key during the alarm to stop the timer.
After 60 seconds the timer alert expires automatically. Select Exit or press the
end key to clear the timer note.
Change the timer
After you have set a timer, you can change the time.
1. In the standby mode, select Menu > Tools > Countdown timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note, and select Start.
Stop the timer before the alarm sounds
After you have set the timer, you can stop the timer.
In the standby mode, select Menu > Tools > Countdown timer > Stop timer.
■ Stopwatch
Your phone has a stopwatch that can be used to track time. The stopwatch displays
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss.ss format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
100
T o o l s
Measure split or lap time
Use the split time or lap time functions for activities where you need to pace yourself.
1. In the standby mode, select Menu > Tools > Stopwatch > Split timing or Lap
timing > Start.
Split timing—Use the split time function for such activities as a long distance
race when you need to pace yourself. Select Split to note the lapsed time. The
timer continues to run and the split time appears below the running time.
Each time you select Split, the new measured time appears at the beginning
of the list. The maximum number of splits is 20.
Lap timing—Use the lap time function when you want to track how long it
takes to complete each cycle or lap. Select Lap to note the lap time. The clock
stops, then immediately restarts from zero. The lap time appears below the
running time. Each time you select Lap, the new measured time appears at
the beginning of the list. The maximum number of laps is 20.
2. Select Stop to end timing and display total time.
Save a time
To save a time while the clock is running, select Stop > Save, enter a name for the
measurement, and select OK. If you do not enter a name, the total time is used as
the default title for the lap or split time.
Stopwatch options
In the standby mode, select Menu > Tools > Stopwatch and one of the following:
Continue—Continues to measure time. Only appears if clock is running and you
are returning to stopwatch screen.
Show last time—View the last measured time.
Split timing—Use the split time function.
Lap timing—Use the lap time function.
View times—Browse saved times.
Delete times > One by one or Delete all—Delete saved times.
Operation note
If you press the end key and return to the standby mode, the clock continues to
run in the background, and
appears at the top of the screen.
To return to the Stopwatch screen, do the following:
1. In the standby mode, select Menu > Tools > Stopwatch > Continue.
2. To stop the clock, select Stop.
101
P C c o n n e c t i v i t y
15. PC connectivity
■ PC data transfer
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using Bluetooth connectivity.
For more information, see "Bluetooth connectivity," p. 72.
You can transfer data, such as music, photos, and videos, from your device to a
compatible PC or from a compatible PC to your device using an IR connection. For
more information, see "Infrared connectivity," p. 75.
■ Nokia PC Suite
Nokia PC Suite software is available for this phone. Nokia PC Suite is a collection
of powerful tools that you can use to manage your phone features and data. Each
component is a separate program that includes online helps.
Nokia PC Suite software, installation instructions, and other documentation is
provided free of charge and can be downloaded from the software downloads of
Some of the features in your phone require network support. Contact your service
provider for availability and configuration instructions.
102
E n h a n c e m e n t s
16. Enhancements
Check the model number of any charger before use
with this device. This device is intended for use when
supplied with power from the AC-3 or AC-4 charger.
Warning: Use only batteries, chargers and
enhancements approved by Nokia for use with this particular model.
The use of any other types may invalidate any approval or warranty,
and may be dangerous.
For availability of approved enhancements, please check with your dealer.
When you disconnect the power cord of any enhancement, grasp and pull the
plug, not the cord.
A few practical rules about accessories and enhancements:
•
•
Keep all accessories and enhancements out of the reach of small children.
When you disconnect the power cord of any accessory or enhancement, grasp
and pull the plug, not the cord.
•
•
Check regularly that enhancements installed in a vehicle are mounted and
are operating properly.
Installation of any complex car enhancements must be made by qualified
personnel only.
Power
USB data cable
• Connectivity Cable (CA-53)
•
Standard 1150 mAh Li-Ion Battery
(BL-6C)
Handsfree
•
•
•
•
Compact Charger (AC-3)
Travel Charger (AC-4)
Mobile Charger (DC-4)
Charger Adapter (CA-44)
•
Easy to Use Car Handsfree (HF-3)
Headsets
•
Mono Headsets (HDB-4, HS-5, HS-8)
•
Stereo Headsets (HS-3, HS-23)
Use the CA-44 charger adapter to
connect the phone with Nokia
chargers with a larger barrel size,
including ACP-7, ACP-8, ACP-9,
ACP-12, AC-1 (retractable charger),
and LCH-12 (mobile charger).
Miscellaneous
•
Inductive Loopset (LPS-4)
•
Music Stand (MD-1)
103
R e f e r e n c e i n f o r m a t i o n
17. Reference information
This section provides information about your phone batteries, enhancements,
chargers, safety guidelines, and technical information. Be aware that the
information in this section is subject to change as batteries, chargers, and
enhancements change.
■ Batteries and chargers
Your device is powered by a rechargeable battery. The full performance of a new
battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but it will eventually
wear out. When the talk and standby times are noticeably shorter than normal,
replace the battery. Use only Nokia approved batteries, and recharge your battery
only with Nokia approved chargers designated for this device.
If a replacement battery is being used for the first time or if the battery has not
been used for a prolonged period, it may be necessary to connect the charger and
then disconnect and reconnect it to start the charging.
Unplug the charger from the electrical plug and the device when not in use. Do not
leave fully charged battery connected to a charger, since overcharging may shorten
its lifetime. If left unused, a fully charged battery will lose its charge over time.
If the battery is completely discharged, it may take a few minutes before the
charging indicator appears on the display or before any calls can be made.
Use the battery only for its intended purpose. Never use any charger or battery
that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object such as a coin, clip, or pen causes direct connection of the
positive (+) and negative (-) terminals of the battery. (These look like metal strips
on the battery.) This might happen, for example, when you carry a spare battery
in your pocket or purse. Short-circuiting the terminals may damage the battery
or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or
winter conditions, will reduce the capacity and lifetime of the battery. Always try
to keep the battery between 15°C and 25°C (59°F and 77°F). A device with a hot
or cold battery may not work temporarily, even when the battery is fully charged.
Battery performance is particularly limited in temperatures well below freezing.
104
R e f e r e n c e i n f o r m a t i o n
Do not dispose of batteries in a fire as they may explode. Batteries may also
explode if damaged. Dispose of batteries according to local regulations. Please
recycle when possible. Do not dispose as household waste.
■ Nokia battery authentication guidelines
Always use original Nokia batteries for your safety. To check that you are getting
an original Nokia battery, purchase it from an authorized Nokia dealer, look for
the Nokia Original Enhancements logo on the packaging and inspect the hologram
label using the following steps:
Successful completion of the three steps is not a total assurance of the authenticity
of the battery. If you have any reason to believe that your battery is not an authentic
original Nokia battery, you should refrain from using it and take it to the nearest
authorized Nokia service point or dealer for assistance. Your authorized Nokia
service point or dealer will inspect the battery for authenticity. If authenticity
cannot be verified, return the battery to the place of purchase.
Authenticate hologram
1. When looking at the hologram on the label, you
should see the Nokia connecting hands symbol from
one angle and the Nokia Original Enhancements logo
when looking from another angle.
2. When you angle the hologram left, right, down,
and up, you should see 1, 2, 3, and 4 dots on each
side respectively.
3. Scratch the side of the label to reveal a 20-digit code,
for example 12345678919876543210. Turn the battery
so that the numbers are facing upwards. The 20-digit
code reads starting from the number at the top row
followed by the bottom row. Confirm that the 20-digit
code is valid by following the instructions at
105
R e f e r e n c e i n f o r m a t i o n
What if your battery is not authentic?
If you cannot confirm that your Nokia battery with the hologram on the label is
an authentic Nokia battery, please do not use the battery. Take it to the nearest
authorized Nokia service point or dealer for assistance. The use of a battery that
is not approved by the manufacturer may be dangerous and may result in poor
performance and damage to your device and its enhancements. It may also
invalidate any approval or warranty applying to the device.
106
C a r e a n d m a i n t e n a n c e
Care and maintenance
Your device is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you protect your warranty coverage.
•
Keep the device dry. Precipitation, humidity and all types of liquids or moisture
can contain minerals that will corrode electronic circuits. If your device does
get wet, remove the battery and allow the device to dry completely before
replacing it.
•
•
•
Do not use or store the device in dusty, dirty areas. Its moving parts and
electronic components can be damaged.
Do not store the device in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
Do not store the device in cold areas. When the device returns to its normal
temperature, moisture can form inside the device and damage electronic
circuit boards.
•
•
Do not attempt to open the device other than as instructed in this guide.
Do not drop, knock, or shake the device. Rough handling can break internal
circuit boards and fine mechanics.
•
•
•
•
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean
the device.
Do not paint the device. Paint can clog the moving parts and prevent
proper operation.
Use a soft, clean, dry cloth to clean any lenses, such as camera, proximity
sensor, and light sensor lenses.
Use only the supplied or an approved replacement antenna. Unauthorized
antennas, modifications, or attachments could damage the device and may
violate regulations governing radio devices.
•
•
Use chargers indoors.
Always create a backup of data you want to keep, such as contacts and
calendar notes, before sending your device to a service facility.
All of the above suggestions apply equally to your device, battery, charger, or any
enhancement. If any device is not working properly, take it to the nearest
authorized service facility for service.
107
A d d i t i o n a l s a f e t y i n f o r m a t i o n
Additional safety information
Your device and its enhancements may contain small parts. Keep them out of the
reach of small children.
■ Operating environment
Remember to follow any special regulations in force in any area and always switch
off your device when its use is prohibited or when it may cause interference or
danger. Use the device only in its normal operating positions. This device meets
RF exposure guidelines when used either in the normal use position against the
ear or when positioned at least 2.2 centimeters (7/8 inches) away from the body.
When a carry case, belt clip or holder is used for body-worn operation, it should
not contain metal and should position the device the above-stated distance from
your body. In order to transmit data files or messages, this device requires a good
quality connection to the network. In some cases, transmission of data files or
messages may be delayed until such a connection is available. Ensure the above
separation distance instructions are followed until the transmission is completed.
Parts of the device are magnetic. Metallic materials may be attracted to the device,
and persons with a hearing aid should not hold the device to the ear with the
hearing aid. Do not place credit cards or other magnetic storage media near the
device, because information stored on them may be erased.
■ Medical devices
Operation of any radio transmitting equipment, including wireless phones, may
interfere with the functionality of inadequately protected medical devices. Consult
a physician or the manufacturer of the medical device to determine if they are
adequately shielded from external RF energy or if you have any questions. Switch
off your device in health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be using equipment
that could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a minimum separation of 15.3
centimeters (6 inches) be maintained between a wireless phone and a pacemaker
to avoid potential interference with the pacemaker. These recommendations are
consistent with the independent research by and recommendations of Wireless
Technology Research. Persons with pacemakers should:
108
A d d i t i o n a l s a f e t y i n f o r m a t i o n
•
Always keep the device more than 15.3 centimeters (6 inches) from
the pacemaker;
•
•
Not carry the device in a breast pocket; and
Hold the device to the ear opposite the pacemaker to minimize the potential
for interference.
If you suspect interference, switch off your device and move the device away.
Hearing aids
Some digital wireless devices may interfere with some hearing aids.
If interference occurs, consult your service provider.
■ Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, air bag
systems. For more information, check with the manufacturer or its representative
of your vehicle or any equipment that has been added.
Only qualified personnel should service the device, or install the device in a
vehicle. Faulty installation or service may be dangerous and may invalidate any
warranty that may apply to the device. Check regularly that all wireless device
equipment in your vehicle is mounted and operating properly. Do not store or
carry flammable liquids, gases, or explosive materials in the same compartment
as the device, its parts, or enhancements. For vehicles equipped with an air bag,
remember that air bags inflate with great force. Do not place objects, including
installed or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Using your device while flying in aircraft is prohibited. Switch off your device
before boarding an aircraft. The use of wireless teledevices in an aircraft may be
dangerous to the operation of the aircraft, disrupt the wireless telephone
network, and may be illegal.
109
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Potentially explosive environments
Switch off your device when in any area with a potentially explosive atmosphere
and obey all signs and instructions. Potentially explosive atmospheres include areas
where you would normally be advised to turn off your vehicle engine. Sparks in
such areas could cause an explosion or fire resulting in bodily injury or even death.
Switch off the device at refuelling points such as near gas pumps at service stations.
Observe restrictions on the use of radio equipment in fuel depots, storage, and
distribution areas, chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), and areas where
the air contains chemicals or particles such as grain, dust, or metal powders.
■ Emergency calls
Important: Wireless phones, including this phone, operate using radio
signals, wireless networks, landline networks, and user-programmed
functions. Because of this, connections in all conditions cannot be
guaranteed. You should never rely solely on any wireless phone for
essential communications like medical emergencies.
To make an emergency call:
1. If the phone is not on, switch it on. Check for adequate signal strength.
2. Press the end key as many times as needed to clear the display and ready the
phone for calls.
3. Enter the official emergency number for your present location. Emergency
numbers vary by location.
4. Press the call key.
If certain features are in use, you may first need to turn those features off before
you can make an emergency call. Consult this guide or your service provider.
When making an emergency call, give all the necessary information as accurately
as possible. Your wireless phone may be the only means of communication at the
scene of an accident. Do not end the call until given permission to do so.
110
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Certification information (SAR)
THE MODEL PHONE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES.
Your mobile device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the limits for exposure to radio frequency (RF) energy
recommended by international guidelines (ICNIRP). These limits establish permitted
levels of RF energy for the general population. The guidelines are based on standards
that were developed by independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards and guidelines include a
substantial safety margin designed to assure the safety of the public, regardless of
age and health and to account for any variations in measurements.
The exposure guidelines for mobile devices employ a unit of measurement known
as the Specific Absorption Rate or SAR. The SAR limit stated in the international
guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests
for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands. The
actual SAR level of an operating device can be well below the maximum value
because the device is designed to use only the power required to reach the
network. That amount changes depending on a number of factors such as how
close you are to a network base station. The highest SAR value when tested
according to international testing procedures for use at the ear is 0.78 W/kg.
SAR values may vary depending on national reporting and testing requirements
and the network band. Use of device accessories and enhancements may result in
different SAR values. Additional SAR information may be provided under product
USA and Canada: The SAR limit of USA (FCC) and Canada (IC) is 1.6 W/kg averaged
over 1 gram of tissue. This device model has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification
for use at the ear is 1.17 W/kg and when properly worn on the body is 1.05 W/kg.
Information about this device can be found on the FCC's website at
www.fcc.gov/oet/fccid by searching the equipment authorization system using
FCC ID: QMNRM-66.
111
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Hearing aid compatibility (HAC)
Your mobile device model complies with FCC rules governing hearing aid
compatibility. These rules require an M3 microphone or higher value. The M-value,
shown on the device box, refers to lower radio frequency (RF) emissions. A higher
M-value generally indicates that a device model has a lower RF emissions level,
which may improve the likelihood that the device will operate with certain hearing
aids. Some hearing aids are more immune than others are to interference. Please
consult your hearing health professional to determine the M rating of your hearing
aid and whether your hearing aid will work with this device. More information on
■ Technical information
Feature
Specification
Dimensions
Weight
Width, 48 mm; length, 98 mm; depth, 22 mm
124 g with BL-6C Li-Ion Battery
Wireless networks
CDMA 800 and 1900 MHz, AMPS, GPS (for Nokia
6265i only), and Bluetooth wireless technology
Volume
87 cc
Frequency range (Tx) AMPS: 824.04—848.97 MHz
PCS: 1851.25—1908.75 MHz
Cellular: 824.70—848.37 MHz
Frequency range (Rx) AMPS: 869.04—893.97 MHz
PCS: 1931.25—1988.75 MHz
Cellular: 869.70—893.37 MHz
GPS frequency
1575.42 MHz
(Nokia 6265i only)
112
A d d i t i o n a l s a f e t y i n f o r m a t i o n
■ Battery information
This section provides information about battery charging times with the Compact
Charger (AC-3), the Travel Charger (AC-4), talk-times, and standby times. Be aware
that the information in this section is subject to change. For more information,
contact your service provider.
Charging times
The following charging times are approximate with the BL-6C 1150 mAh
Li-Ion battery:
Travel Charger (AC-4): up to 1 hour 45 minutes
Compact Charger (AC-3): up to 3 hours
Talk and standby times
Operation times are estimates only and depend on signal strength, phone use,
network conditions, features used, battery age and condition (including charging
habits), temperatures to which the battery is exposed, and many other factors.
Talk time: 3 to 4 hours (digital)
Standby time: 8 to 12 days
113
I n d e x
Index
Bluetooth connectivity 72
receive data 74
set up 74
NUMERICS
1-touch dialing 30, 66
settings 74
business cards 26
A
active profile 61
alarm clock
C
repeating 91
setting 91
tone 91
turn off 92
calendar 92
make notes 93
open 92
options 93
receive, send notes 95
settings 95
allowed number if lock active 79
analog service 82
answer calls 18
slide open 66
antenna 14
anykey answer 65
applications
view 93
call
log, see logs 32
register, see logs 32
settings 65
summary 68
time 33
timers 33
waiting 83
collection 85
settings 81
automatic
keyguard 69
redial 66
update of service 66
update of time and date 65
voice mail 48
caller
groups 28
ID, send my 83
calling cards 66, 67
calls
B
back cover
answer 18
remove 15
replace 15
backlight time-out 63
banner 63
battery 14, 113
authentication guidelines 105
charge 16
conference 18
duration 33
make 17
mute phone during 19
options during 19
restrictions 80
show times on display 68
silence 18
charging times 113
remove, replace 15
talk and standby times 113
114
camera
changing options 88
end calls 18
slide closed 66
enhancements 77
approved 103
equalizer 59
photo sequence 87
recording videos 88
settings 89
take photos 86
use self-timer 87
certification information (SAR) 111
change lock code 80
charger 78, 104
connect 16
ESN, see electronic serial number
extras 85
F
fax calls 33, 67
FCC information 111
feature codes 82
file transfer 76
times 113
clock settings, see time and date
conference calls 18
confirmation tones 64
contacts
folders, see gallery
add 24
delete 31
edit 27
G
gallery
opening folders 52
options 53
games 85
go to functions 12
search 24
settings 28
view 24
countdown timer 100
currency converter 99
custom profile 61
H
D
handsfree settings 77
headset
data
call duration 33
calls 67
transfer 102
connect 17
settings 77
hearing aid
settings 78
help
date settings, see time and date
dialed numbers 32
dialing codes 25
digital service 82
display
get 7
in-phone 11
text activation 11, 71
main menu 11
settings 62
I
distribution lists 46
DTMF tones, see touch tones
indicators and icons 10
infrared 75
Internet, see wireless Internet
E
electronic serial number 7
emergency calls 51, 110
115
I n d e x
missed calls 32
mobile web 50
multimedia messages 40
create 41, 42
delete 44
K
keyguard
automatic 69
lock and unlock 20
security 70
folders 40
read 42
keypad tones 63
reply 42
send 41
settings 45
L
language 69
lap time 101
music player 55
mute phone 19
my phone number, display 30
listen to voice mail 48
location information sharing 65
lock code
change 80
preset 79
N
navigation key 69
logs
clearing 33
approved for 5
dialed numbers 32
missed calls 32
received calls 32
loopset settings 78
loudspeaker 19
Nokia Care Contact Center 7
Nokia PC Suite 102
notes 95
M
make 95
open 95
options 96
send 96
main menu display 11
maintenance services 7
make calls 17
media player 55
memory
O
card 70
checking status 69
phone 69
organizer 91
messages
P
minibrowser, see minibrowser
messages
multimedia, see multimedia
messages
PC connectivity 102
phone
care and maintenance 107
details 84
keys and parts 8
language 69
lock 79
memory 69
text, see text messages
voice, see voice messages
minibrowser
call duration 34
messages 49
miniSD card 16
memory 70
set up your 14
photographs 86
116
play
music tracks 56
radio 57
predictive text 22
profiles 61
settings 61
shared memory 6
show call time 68
sleep mode 62
slide
answer calls 66
end calls 66
snooze time-out 92
specific absorption rate 111
speed dials, see 1-touch dialing
split time 101
standby mode 9
settings 62
Q
quick keys 9
R
radio
options 58
play 57
received calls 32
recording sound 59
register your phone 7
repeating alarm 91
restore factory settings 84
ring
tone for no caller ID 68
volume 63
roaming options 82
standby time 113
stopwatch 100
T
talk time 113
text entry
changing language 21
predictive 22
standard 21
text messages
create 36
S
safety information 4
battery 113
delete 38
certification 111
explosive environments 110
hearing aids 109
operating environment 108
pacemakers 108
vehicles 109
folders 35
read 36
reply 36
send 36
settings 39
templates 36
theme 63
time and date 64
timed profiles 61
to-do list
SAR, see specific absorption rate
screen saver 62
scroll method 11
security 12
keyguard 70
settings 79
edit 97
make 97
self-timer, camera 87
send my caller ID 83
sequence of photos 87
set
open 97
options 98
send 98
view 97
alarm 91
date 64
time 64
tones 63
start-up 70
touch 70
117
I n d e x
touch tones 70
transfer files 76
voice tags
assign 29
TTY/TDD settings 78
turn phone on or off 17
delete 30
modify 29
use 29
volume 18
U
update service, automatic 66
W
wallpaper 62
V
warning tones 64
wireless Internet
access 50
clear cache 51
disconnect 51
make emergency call while online 51
receive call while online 51
sign on 50
vibrating alert 63
videos 88
voice
commands 71
privacy 81
recorder 59
voice messages
automate 48
listen 48
mailbox number 47
setting up mailbox 48
118
|