Nokia 6730 classic User Guide
Issue 2
The availability of particular products and applications andservicesfor these productsmay vary byregion. Please checkwithyour Nokia dealer for details, and availability
of language options.
FCC/INDUSTRY CANADA NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC or Industry Canada can require
you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part
15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the user's
authority to operate this equipment.
/Issue 2 EN
Contents
Connect a compatible headset...............................................18
Connect a USB data cable........................................................18
Wrist strap................................................................................18
Safety...................................................................7
About your device......................................................................7
Network services.......................................................................8
3. Support...........................................................18
In-device help..........................................................................18
My Nokia...................................................................................19
Nokia support and contact information................................19
Software updates....................................................................19
1. Get started........................................................9
Insert SIM card and battery......................................................9
Insert a memory card................................................................9
Charge the battery...................................................................10
Switch the device on and off..................................................11
Antenna locations....................................................................11
Configuration settings............................................................11
Settings wizard........................................................................11
Remove a memory card..........................................................12
Remove the SIM card...............................................................12
Remove the battery.................................................................12
4. Call functions..................................................20
Voice calls.................................................................................20
Video calls.................................................................................22
Call settings..............................................................................23
Video sharing...........................................................................25
5. Music...............................................................26
Music player..............................................................................26
FM Radio...................................................................................27
2. Your device.....................................................12
Keys and parts..........................................................................13
Home screen............................................................................14
Offline profile...........................................................................14
Display indicators....................................................................15
Power saver..............................................................................16
Menu.........................................................................................16
Volume control........................................................................16
Keypad lock (keyguard)...........................................................17
Access codes.............................................................................17
Remote lock.............................................................................17
Installations.............................................................................18
6. Positioning.....................................................28
About GPS.................................................................................28
Assisted GPS (A-GPS)................................................................28
Maps..........................................................................................29
Landmarks ...............................................................................30
GPS data....................................................................................31
7. Write text.......................................................31
Traditional text input..............................................................31
Contents
Predictive text input................................................................32 About Ovi Contacts..................................................................45
Change the writing language.................................................32 About Ovi Files.........................................................................45
Copy and delete text...............................................................33
14. Personalisation............................................45
8. Messaging......................................................33
Themes.....................................................................................46
Write and send messages.......................................................33 Profiles .....................................................................................46
E-mail........................................................................................35
15. Time management.......................................47
9. Contacts..........................................................37
Calendar....................................................................................47
About Contacts.........................................................................37 Alarm clock...............................................................................47
Work with contacts.................................................................38 Clock settings...........................................................................48
Create contact groups.............................................................38
16. Office applications........................................48
PDF reader................................................................................48
Dictionary.................................................................................48
Add ringing tones for contacts...............................................38
10. Gallery..........................................................38
About Gallery............................................................................39 About Quickoffice....................................................................49
Converter..................................................................................49
11. Camera.........................................................39
Calculator..................................................................................50
Capture an image....................................................................39 Active notes .............................................................................50
Record videos...........................................................................40 Notes.........................................................................................51
17. Settings........................................................51
Web browser ...........................................................................40
Connect PC to web...................................................................42 Application settings................................................................51
Share online.............................................................................42 Device and SIM card security..................................................51
Nokia Video Centre..................................................................43 Common accessory settings...................................................52
Search.......................................................................................44 Restore original settings.........................................................52
13. Ovi services...................................................44 18. Data management.......................................52
Visit Ovi.....................................................................................44 Install or remove applications...............................................52
About Ovi Store........................................................................45 File manager............................................................................54
Contents
Device manager.......................................................................54 Emergency calls.......................................................................66
Update device software..........................................................55 Certification information (SAR)..............................................67
19. Connectivity..................................................56 Index..................................................................68
Transfer content from another device..................................56
PC connections.........................................................................57
Bluetooth..................................................................................57
Data cable.................................................................................59
Sync...........................................................................................60
20. Green tips.....................................................60
Save energy..............................................................................60
Recycle......................................................................................61
Save paper................................................................................61
Learn more...............................................................................61
Accessories.........................................................62
Battery................................................................62
Battery and charger information...........................................62
Taking care of your device.................................63
Recycle......................................................................................64
Additional safety information...........................65
Small children..........................................................................64
Operating environment..........................................................64
Medical devices........................................................................65
Vehicles.....................................................................................66
Potentially explosive environments......................................66
Safety
Read these simple guidelines. Not following them may be
dangerous or illegal. Read the complete user guide for further
information.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
SWITCH ON SAFELY
Do not switch the device on when wireless phone
use is prohibited or when it may causeinterference
or danger.
About your device
The wireless device described in this guide is approved for
use on the (E)GSM 850, 900, 1800 and 1900 networks, and
UMTS 900 and 2100 HSDPA and HSUPA networks. Contact your
service provider for more information about networks.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to
operate the vehicle while driving. Your first
consideration while driving should be road safety.
When using this device, obey all laws and respect local
customs, privacy and legitimate rights of others, including
copyrights. Copyright protection may prevent some images,
music (including ringing tones), and other content from
being copied, modified, or transferred.
INTERFERENCE
All wireless devices may be susceptible to
interference, which could affect performance.
Your device supports several methods of connectivity. Like
computers, your device may be exposed to viruses and other
harmful content. Exercise caution with messages,
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in
aircraft, near medical equipment, fuel, chemicals,
or blasting areas.
connectivity requests, browsing, and downloads. Only install
and use services and other software from trustworthy
sources that offer adequate security and protection against
harmful software, such as applications that are Symbian
Signed or have passed the Java Verified™ testing. Consider
installing antivirus and other security software on your
device and any connected computer.
QUALIFIED SERVICE
Only qualified personnel may install or repair this
product.
ACCESSORIES AND BATTERIES
Use only approved accessories and batteries. Do
not connect incompatible products.
Your device may have preinstalled bookmarks and links for
third-party internet sites. You may also access other third-
party sites through your device. Third-party sites are not
© 2009 Nokia. All rights reserved.
7
Safety
affiliated with Nokia, and Nokia does not endorse or assume networks; other features may require that you make specific
liability for them. If you choose to access such sites, you
should take precautions for security or content.
arrangements with your service provider to use them.
Network services involve transmission of data. Check with
your service provider for details about fees in your home
network and when roaming on other networks. Your service
provider can explain what charges will apply. Some networks
may have limitations that affect how you can use some
features of this device requiring network support such as
support for specific technologies like WAP 2.0 protocols (HTTP
and SSL) that run on TCP/IP protocols and language-
dependent characters.
Warning: To use any features in this device, other
than the alarm clock, the device must be switched on. Do not
switch the device on when wireless device use may cause
interference or danger.
Make back-up copies or keep a written record of all important
information stored in your device.
When connecting to any other device, read its user guide for
detailed safety instructions. Do not connect incompatible
products.
Your service provider may have requested that certain
features be disabled or not activated in your device. If so,
these features will not appear on your device menu. Your
The images in this guide may differ from your device display. device may also have customized items such as menu names,
menu order, and icons.
Refer to the user guide for other importantinformationabout
your device.
Network services
To use the device you must have service from a wireless
service provider. Some features are not available on all
8
© 2009 Nokia. All rights reserved.
1. Get started
Insert SIM card and battery
1. To remove the back cover of the device, press the back
cover with your fingers, slide the cover open, and lift the
cover off.
4. Replace the back cover.
2. Slide the SIM card into the SIM card holder. The battery
must be removed before you can insert the SIM card.
Insert a memory card
The memory card may be supplied with the device, and may
already be inserted.
1. Open the memory card slot cover (1).
2. Place the card in the slot with the
contact area facing down (2).
Ensure that the contact area on the card is facing down
on the device, and the bevelled corner is facing away from
the card holder slot.
3. Push the card gently to lock it into
place. Close the slot cover (3).
3. Insert the battery.
© 2009 Nokia. All rights reserved.
9
Get started
charger adapter to the old charger. The adapter is
available as a separate accessory.
Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry standards
for memory cards, but some brands may not be
fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored on
the card.
USB charging
You can use USB charging when a wall outlet is not available.
When charging your device with the USB data cable, the
charging time is longer. USB charging efficiency varies
significantly. In some cases, it may take a very long time for
charging to start and the device to start functioning.
Charge the battery
With USB charging, you can also transfer data with the USB
data cable while charging the device.
Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
1. Connect a compatible USB device to your device using a
compatible USB data cable.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available USB
mode options on the display of the device.
3. When the battery is fully charged, disconnect the charger
from the device, then from the wall outlet.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
before the charging indicator appears on the display or
before any calls can be made.
Tip: If you have old compatible Nokia chargers, you can
use them with your device by attaching the CA-44
10
© 2009 Nokia. All rights reserved.
Get started
Switch the device on and off
Press and hold the power key to
switch the device on and off.
Press the power key briefly to
end a call or close an application.
If the device asks for a PIN code,
enter the PIN code, and select
OK.
If the device asks for the lock
code, enter the lock code, and
select OK. The factory setting for
the lock code is 12345.
Configuration settings
Before you can use multimedia messaging, e-mail,
synchronisation, streaming, and the browser, you must have
the proper configuration settings in your device. Your device
may automatically configure browser, multimedia
To set the correct time zone,
time, and date, select the
messaging, access point, and streaming settings based on
the SIM card used. If not, you can use the Settings wizard
application to configure the settings. You may receive the
settings as a configuration message that you can save to your
device. For more information on availability, contact your
service provider or nearest authorised Nokia dealer.
country you are presently in,
then enter the local time and date.
Antenna locations
Your device may have internal and external antennas. As with
any radio transmitting device, avoid touching the antenna
area unnecessarily while the antenna is transmitting or
receiving. Contact with such an antenna affects the
communication quality and may cause the device to operate
at a higher power level than otherwise needed and may
reduce the battery life.
When you receive a configuration message, and the settings
are not automatically saved and activated, 1 new message
is displayed. To save the settings, select Show > Options >
Save. You may need to enter a PIN code provided by the
service provider.
Settings wizard
Select
> Settings > Sett. wizard.
© 2009 Nokia. All rights reserved.
11
Your device
Use Settings wizard to define e-mail and connection settings. 5. Close the slot cover.
The availability of the items in Settings wizard depends on
the features of the device, SIM card, network operator, and
Remove the SIM card
the data in the Settings wizard database.
1. Remove the back cover of the device.
To start Settings wizard, select Start.
2. Remove the battery. Removing the battery releases the
To get the best results when using the settings wizard, keep
your SIM card inserted in the device. If the SIM card is not
inserted, follow the instructions on the display.
SIM card holder lock.
3. Carefully push the SIM card out of the SIM card holder with
a pen or other appropriate object.
Select from the following:
● Operator — Define the operator-specific settings, such as
MMS, internet, WAP, and streaming settings.
● E-mail setup — Create a new mailbox.
● Video sharing — Configure video sharing settings.
The settings available for editing may vary.
Remove a memory card
Remove the battery
2. Hold the device so that the battery faces downwards, and
tap the device gently against your palm, so that the
battery falls into your hand.
1. Remove the back cover of the device.
Important: Do not remove the memory card in the
middle of an operation when the card is being accessed.
Removing the card inthe middle of an operation may damage
the memory card as well as the device, and data stored on
the card may be corrupted.
1. Press the power key briefly, and select Remove memory
card > Yes.
2. Open the memory card slot cover.
3. Press the memory card gently to release it.
4. Pull the card out, and select OK.
12
© 2009 Nokia. All rights reserved.
Your device
2. Your device
11 — Light sensor
12 — Secondary camera lens
Keys and parts
1 — Earpiece
2 — Left selection key
3 — Home key
4 — Call key
5 — Number keys
6 — Microphone
13 — Nokia AV connector (2.5 mm)
14 — Micro USB connector
15 — Charger connector
7 — End/Power key
8 — Clear key C
9 — Right selection key
10 — Navi™ key; hereafter referred to as scroll key
16 — Own key
17 — Camera flash
© 2009 Nokia. All rights reserved.
13
Your device
18 — Main camera lens
To activate or deactivate Bluetooth connectivity, press and
hold *.
19 — Volume up key
To modify the home screen, select
> Settings >
20 — Volume down key
21 — Memory card slot
22 — Capture key
Settings and General > Personalisation > Standby
mode and from the available options.
23 — Loudspeaker
Offline profile
The surface of this device is nickel-free.
To quickly activate the Offline profile, press the power key
briefly, and select Offline.
Own key
To switch to another profile, press the power key briefly, and
select a profile.
You can change the function that is activated when you press
the Own key. For example, you can set the key to open an
application or a web page.
When the Offline profile is active, all connections that use
radio frequencies are closed. However, you can use your
device without the SIM card and listen to the radio or music.
Remember to switch off your device when wireless phone use
is prohibited.
To change the function, select
> Settings > Settings
and General > Own key > Change.
Home screen
Important: In the offline profile you cannot make or
receive any calls, or use other features that require cellular
network coverage. Calls may still be possible to the official
emergency number programmed into your device. To make
calls, you must first activate the phone function by changing
profiles. If the device has been locked, enter the lock code.
When you have switched on the device, and it is registered
to a network, the device is in the home screen and ready for
use.
To open a list of most recently dialled numbers, press the call
key.
To use voice commands or voice dialling, press and hold the
right selection key.
To change the profile, press the power key briefly, and select
a profile.
To open a connection to the web, press and hold 0.
14
© 2009 Nokia. All rights reserved.
Your device
The keys of the device are locked.
An alarm is active.
Display indicators
The device is being used in a UMTS network or a GSM
network (network service). The bar next to the icon
indicates the signal strength of the network at your
current location. The higher the bar, the stronger the
signal.
You have activated the Silent profile, and the device
does not ring for an incoming call or message.
High-speed downlink packet access (HSDPA) / high-
speed uplink packet access (HSUPA) (network
service) in the UMTS network is activated.
Bluetooth connectivity is activated.
A Bluetooth connection is established. When the
indicator is blinking, your device is trying to connect
with another device.
The device is using the Offline profile and is not
connected to a cellular network.
A GPRS packet data connection is available (network
service). indicates that the connection is active.
indicates that the connection is on hold.
The battery charge level. The higher the bar, the
stronger the charge in the battery.
You have unread messages in the Inbox folder in
Messaging.
An EGPRS packet data connection is available
(network service). indicates that the connection is
active. indicates that the connection is on hold.
You have received new e-mail in the remote
mailbox.
A UMTS packet data connection is available (network
service). indicates that the connection is active.
indicates that the connection is on hold.
There are messages waiting to be sent in the Outbox
folder in Messaging.
You have missed calls.
© 2009 Nokia. All rights reserved.
15
Your device
● Power saver time-out — Set the length of time that the
device is inactive before the power saver is activated.
● Light time-out — Set the length of time that the device
is inactive before the screen is dimmed.
HSDPA/HSUPA is supported and available (network
service). The icon may vary between regions.
indicates that the connection is active. indicates
that the connection is on hold.
Menu
Your device is connected to a computer with a USB
data cable.
Press
.
In the menu, you can access the functions in your device.
To open an application or a folder, select the item.
The second phone line is being used (network
service).
If you change the order of the functions in the menu, the
order may differ from the default order described in this user
guide.
All calls are forwarded to another number. If you
have two phone lines, a number indicates the active
line.
To mark or unmark an item in applications, press #.
To mark or unmark several consecutive items, press and hold
A headset or a loopset is connected to the device.
A hands-free car kit is connected to the device.
#, and scroll up or down.
To change the menu view, select Options > Change Menu
view.
To close an application or a folder, select Options > Exit.
Your device is synchronising.
To display and switch between open applications, press and
hold the home key, and select an application.
Other indicators may also be displayed.
Leaving applications running inthebackground increases the
demand on battery power and reduces the battery life.
Power saver
Select
> Settings > Settings.
Volume control
To define the screen saver settings, select General >
To adjust the earpiece or loudspeaker volume during a call or
when listening to an audio file, use the volume keys.
Personalisation > Display and from the following:
16
© 2009 Nokia. All rights reserved.
Your device
To activate or deactivate the loudspeaker during a call, select ● PUK (UPUK) and PUK2 (UPUK2) codes may be supplied with
Loudsp. or Handset.
the SIM (USIM) card. If you enter the PIN code incorrectly
three times in succession, you are asked for the PUK code.
If thecodesare not supplied, contact your service provider.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
● The security code helps to protect your phone against
unauthorised use. You can create and change the code,
and set the phone to request the code. Keep the code
secret and in a safe place separate from your phone. If you
forget the code and your phone is locked, your phone will
require service. Additional charges may apply, and all the
personal data in your device may be deleted. For more
information, contact a Nokia Care point or your device
dealer.
Keypad lock (keyguard)
To lock the keypad in the home screen, press the left selection
key and * within 1.5 seconds.
To set the device to automatically lock the keypad after a
certain time, select
> Settings > Settings and
General > Security > Phone and SIM card > Keypad
autolock period > User defined, and select the desired
time.
● The barring password is required when using the call
barring service to restrict calls to and from your phone
(network service).
To unlock the keypad, select Unlock, and press *. When the
device or keypad is locked, calls may be possible to the official
emergency number programmed into your device.
Remote lock
You can lock your device from another device using a text
message. To enable your device to be locked remotely, and
Access codes
to define the lock message to be used, select
>
Settings > Settings > General > Security and Phone and
SIM card > Remote phone locking. When you have entered
the message, select OK. The message can be up to 20
characters long.
Select
> Settings > Settings.
To define how your device uses the access codes and security
settings, select General > Security > Phone and SIM
card and from the following:
To lock your device, send the lock message as a text message
to your mobile phone number. To unlock your device later,
select Unlock, and enter the lock code.
● The PIN (UPIN) code, supplied with the SIM (USIM) card,
helps to protect the card against unauthorised use.
● The PIN2 (UPIN2) code, supplied with some SIM (USIM)
cards, is required to access certain services.
© 2009 Nokia. All rights reserved.
17
Support
Installations
Connect a USB data cable
Select
> Applications > Installations.
Connect a compatible USB data cable to the USB connector.
You can find additional applications and download
To select the default USB
applications into this folder.
connection mode or change the
active mode, select
>
Settings and Connectivity >
USB > USB connection mode,
and select the desired mode.
Important: Only install and useapplicationsandother
software from trusted sources, such as applications that are
Symbian Signed or have passed the Java Verified™ testing.
To select whether the default
mode is activated automatically,
select Ask on connection.
Connect a compatible headset
Do not connect products that create an output signal as this
may cause damage to the device. Do not connect any voltage
source to the Nokia AV Connector.
Wrist strap
Thread the wrist strap, and tighten it.
When connecting any external device or any headset, other
than those approved by Nokia for use with this device, to the
Nokia AV Connector, pay special attention to volume levels.
3. Support
applications in your device.
In-device help
Your device contains instructions to help to use the
18
© 2009 Nokia. All rights reserved.
Support
>
For terms and conditions, see the documentation supplied
you want to read instructions.
To sign-up to My Nokia later, select
> Applications >
Installations > My Nokia. After the invitation to join My
When an application is open, to access the help text for the
Nokia, the Phone setup application starts.
current view, select Options > Help.
To open the Phone setup application later, select
>
When you are reading the instructions, to change the size of
the help text, select Options > Decrease font size or
Increase font size.
Settings > Help > Phone setup.
Nokia support and contact
information
You can find links to related topics at the end of the help text.
If you select an underlined word, a short explanation is
displayed. Help texts use the following indicators:
shows
for the latest version of this guide, additional information,
downloads, and services related to your Nokia product.
a link to a related help topic.
shows a link to the
application being discussed.
When you are reading the instructions, to switch between
help texts and the application that is open in the background,
press and hold the menu key, and select from the list of open
applications.
On the website, you can get information on the use of Nokia
products and services. If you need to contact customer
service, check the list of local Nokia contact centers at
For maintenance services, check your nearest Nokia service
My Nokia
My Nokia is a free service that regularly sends you text
messages containing tips, tricks, and support for your Nokia
device. If My Nokia is available in your country and supported
by your service provider, your device invites you to join the
My Nokia service after you have set the time and the date.
Software updates
Nokia may produce software updates that offer new features,
enhanced functions, and improved performance. You may be
able to request these updates through the Nokia Software
Updater PC application. Software updates may not be
available for all products or their variants. Not all operators
may endorse the latest software versions available.
To sign-up to My Nokia , select Accept and follow the
instructions on the display.
Call charges apply when you send messages to sign up or
unsubscribe.
© 2009 Nokia. All rights reserved.
19
Call functions
To update the device software, you need the Nokia Software To get more information and to download the Nokia
Updater application and a compatible PC with Microsoft
Windows 2000, XP, or Vista operating system, broadband
internet access, and a compatible data cable to connect your
softwareupdate or your local Nokia website.
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
Warning: If you install a software update, you cannot
use the device, even to make emergency calls, until the
installation is completed and the device is restarted. Be sure
to back up data before accepting installation of an update.
Tip: To check the software version in your device, enter
*#0000# in the home screen.
The download and installation may take up to 20 minutes
with Device manager and up to 30 minutes with Nokia
Software Updater.
4. Call functions
Tip: For international calls, add the + character that
replaces the international access code, and enter the
country code, area code (omit the leading 0, if
necessary), and phone number.
Voice calls
Make a call
Important: If the device has been locked, enter the
To end the call or cancel the call attempt, press the end key.
lock code to activate the phone function.
To make a call using the saved contacts, open the contacts.
Enter the first letters of the name, scroll to the name, and
press the call key.
To make a call using the log, press the call key to view up to
20 numbers that you last called or attempted to call. Scroll to
the desired number or name, and press the call key.
To adjust the volume of an active call, use the volume keys.
When the device is locked, calls may be possible to the official
emergency number. Making an emergency call in the offline
profile or when the device is locked requires that the device
recognise the number to be an official emergency number. It
is advisable to change the profile or unlock the device by
entering the lock code before you make the emergency call.
To make a call, enter the phone number, including the area
code, and press the call key.
20
© 2009 Nokia. All rights reserved.
Call functions
To switch from a voice call to a video call, select Options >
Switch to video call. The device ends the voice call and
makes a video call to the recipient.
To call your mailbox in the home screen, press and hold 1; or
press 1 and then the call key. Select the mailbox you want to
call.
To change the mailbox number, select the mailbox and
Speed dialling
Options > Change number.
Select
> Settings > Settings and Phone > Call >
Speed dialling.
Voice dialling
Speed dialling allows you to make a call by pressing and
Make a phone call by saying the name that is saved in the
contacts list.
holding a number key in the home screen.
To activate speed dialling, select On.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not rely
solely upon voice dialling in all circumstances.
To assign a number key to a phone number, select
Settings > Speed dial. Scroll to the number key (2 - 9) on
the display, and select Options > Assign. Select the desired
number from the contacts list.
>
1. In the home screen, press and hold the right selection
key.A short tone sounds, and Speak now is displayed.
To delete the phone number assigned to a number key, scroll
2. Say the name of the contact you want to dial. If the voice
recognition is successful, a list of proposed matches is
displayed. The phone plays the voice command of the first
match on the list. If it is not the correct command, scroll
to another entry.
to the speed dialling key, and select Options > Remove.
To modify a phone number assigned to a number key, scroll
to the speed dialling key, and select Options > Change.
Voice mail
Select
> Settings > Call mailbox.
Make a conference call
When you open the Voice mail application for the first time,
1. To make a conference call, enter a participant's phone
number, and press the call key.
you are asked to enter the number of your voice mailbox.
2. When the participant answers, select Options > New
To call your voice mailbox, scroll to Voice mailbox, and select
call.
Options > Call voice mailbox.
© 2009 Nokia. All rights reserved.
21
Call functions
3. When you have made a phone call to all the participants,
select Options > Conference to merge the calls into a
conference call.
Tip: To view the dialled numbers when in the home
screen, press the call key.
To view the approximate duration of calls to and from your
To mute the microphone of your device during the call, select
device, select Call duration.
Options > Mute.
To view the amount of data transferred during packet data
To drop a participant from the conference call, scroll to the
participant, and select Options > Conference > Drop
participant.
connections, select Packet data.
Video calls
To discuss privately with a conference call participant, scroll
to the participant, and select Options > Conference >
Private.
Make a video call
Warning: Do not hold the device near your ear when
the loudspeaker is in use, because the volume may be
extremely loud.
Answer a call
To answer a call, press the call key.
To make a video call, enter the phone number or select the
recipient from the contacts list and Options > Call > Video
call. When the video call starts, the camera of the device is
activated. If the camera is already in use, video sending is
disabled. If the recipient of the call does not want to send
video back to you, a still image is shown instead. To define
the still image sent from your device instead of video, select
> Settings > Settings and Phone > Call > Image in
video call.
To disable the sending of audio, video, or video and audio,
select Options > Disable > Sending audio, Sending
video, or Sending aud. & video.
To adjust the volume of an active video call, use the volume
To reject a call, press the end key.
To mute the ringing tone instead of answering a call, select
Silence.
When you have an active call and the call waiting function
(network service) is activated, press the call key to answer a
new incoming call. The first call is put on hold. To end the
active call, press the end key.
Call and data registers
Select
> Log.
To view recently missed, received, and dialled calls, select
Recent calls.
keys.
22
© 2009 Nokia. All rights reserved.
Call functions
To use the loudspeaker, select Options > Activate
loudspeaker. To mute the loudspeaker and use the earpiece,
select Options > Activate handset.
● Call waiting — Set the device to notify you of incoming
calls while you are in a call (network service).
● Reject call with message — Reject a call, and send a text
message to the caller.
To swap the places of images, select Options > Swap
● Message text — Write the standard text message that is
sent when you reject a call.
images.
To zoom the image on the display, select Options > Zoom
● Own video in recvd. call — Allow or deny video sending
during a video call from your device.
and scroll up or down.
● Image in video call — Display a still image if video is not
sent during a video call.
To end the video call and make a new voice call to the same
recipient, select Options > Switch to voice call.
● Automatic redial — Set your device to make a maximum
of 10 attempts to connect the call after an unsuccessful call
attempt. To stop automatic redialling, press the end key.
● Show call duration — Display the length of a call during
the call.
Answer or reject a video call
When a video call arrives,
is displayed.
1. To answer the video call, press the call key.
● Summary after call — Display the length of a call after
the call.
2. To start sending live video image, select Yes.
If you do not activate the video call, you only hear the voice
of the caller. A grey screen replaces the video image. To
replace the grey screen with a still image captured by the
● Speed dialling — Activate speed dialling.
● Anykey answer — Activate anykey answer.
● Line in use — This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you are not able to make calls. When line 2 is
selected, is displayed in the home screen.
● Line change — Prevent line selection (network service),
if supported by your SIM card. To change this setting, you
need the PIN2 code.
camera in your device, select
> Settings and
Telephony > Call > Image in video call.
Call settings
Call settings
Select
> Settings > Settings and Phone > Call.
Select from the following:
● Send my caller ID — Display your phone number to the
person you are calling.
© 2009 Nokia. All rights reserved.
23
Call functions
Call divert
divert.
Call barring
barring.
Select
> Settings > Settings and Phone > Call
Select
> Settings > Settings and Phone > Call
Divert incoming calls to your voice mailbox or to another
You can bar the calls that can be made or received with the
device (network service). To change the settings, you need
the barring password from your service provider. Call barring
affects all call types.
phone number. For details, contact your service provider.
Select the type of calls to divert and from the following
options:
Call barring and call diverting cannot be active at the same
● If busy — Divert incoming calls if you have an active call.
● Ifnot answered — Divert incoming calls after your device
rings for a specified length of time. Select the length of
time for the device to ring before diverting the call.
● If out of reach — Divert calls when the device is switched
off or out of network coverage.
time.
When calls are barred, calls may be possible to certain official
emergency numbers.
To bar calls, select from the following:
● Outgoing calls — Prevent making voice calls with your
● If not available — Divert calls if you have an active call,
do not answer, or the device is switched off or out of
network coverage.
device.
● Incoming calls — Prevent incoming calls.
● International calls — Prevent callingto foreigncountries
or regions.
To divert calls to your voice mailbox, select a call type, a
diverting option, andOptions > Activate > To voice
mailbox.
● Incoming calls when roaming — Prevent incoming calls
when outside your home country.
● International calls except to home country — Prevent
calls to foreign countries or regions, but allow calls to your
home country.
To divert calls to another phone number, select a call type, a
diverting option, and Options > Activate > To other
number. Enter the number, or select Find to retrieve a
number saved in Contacts.
To check the status of voice call barrings, select the barring
option and Options > Check status.
To check the current diverting status, scroll to the diverting
option, and select Options > Check status.
To deactivate all voice call barrings, select a barring option
and Options > Deactivate all barrings.
To stop diverting calls, scroll to the diverting option, and
select Options > Deactivate.
24
© 2009 Nokia. All rights reserved.
Call functions
● Ensure you have an active UMTS connection and are within
UMTS network coverage. If you move outside the UMTS
network during a video sharing session, the sharing stops
while your voice call continues.
Network settings
Select
> Settings > Settings and Phone > Network.
To select the network mode, select Network mode and Dual
mode, UMTS, or GSM. In dual mode, the device switches
automatically between networks.
● Ensure that both the sender and recipient are registered
to the UMTS network. If you invite someone to a sharing
session and the recipient’s device is not within UMTS
network coverage, does not have video sharing installed,
or person-to-person connections set up, the recipient does
not receive invitations. You receive an error message that
indicates that the recipient cannot accept the invitation.
Tip: Selecting UMTS enables faster data transfer, but
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting Dual mode may cause constant
jumping between the two networks, which also
increases the demand on battery power.
To select the operator, select Operator selection and
Manual to select from available networks, or Automatic to
set the device to select the network automatically.
Share live video or video clips
During an active voice call, select Options > Share video.
1. To share live video during the call, select Live video.
To set the device to indicate when it is used in a microcellular
To share a video clip, select Video clip and the clip you
network (MCN), select Cell info display > On.
want to share.
You may need to convert the video clip into a suitable
format to be able to share it. If your device notifies you
that the video clip must be converted, select OK. Your
device must have a video editor for the conversion to
work.
Video sharing
Video sharing requirements
Video sharing requires a UMTS connection. For more
information on the service, UMTS network availability, and
fees associated with using this service, contact your service
provider.
2. If the recipient has several SIP addresses or phone
numbers including the country code saved in the contacts
list, select the desired address or number. If the SIP
address or phone number of the recipient is not available,
enter the address or number of the recipient including the
country code, and select OK to send the invitation. Your
device sends the invitation to the SIP address.
To use video sharing you must do the following:
● Ensure that your device is set up for person-to-person
connections.
© 2009 Nokia. All rights reserved.
25
Music
Sharing begins automatically when the recipient accepts 3. To end the sharing session, select Stop. To end the voice
the invitation.
call, press the end key. When you end the call, video
sharing also ends.
Options during video sharing
To save the live video you shared, select Yes when prompted.
Zoom the video (available for sender only).
Adjust the brightness (available for sender only).
The device notifies you of the location of the saved video.
If you access other applications while you are sharing a video
clip, the sharing is paused. To return to the video sharing
view, and to continue sharing, in the home screen, select
Options > Continue.
or
or
or
Mute or unmute the microphone.
Turn the loudspeaker on and off.
Pause and resume video sharing.
Switch to full screen mode (available for receiver
5.onMly).usic
To play a song, select the desired category, and the song.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
loudspeaker is in use, because the volume may be extremely
loud.
To pause playback, press the scroll key; to resume, press the
scroll key again. To stop playback, scroll down.
To fast-forward or rewind, press and hold the scroll key to the
right or left.
You can listen to music also when the offline profile is
To skip to the next item, scroll right. To return to the
beginning of the item, scroll left. To skip to the previous item,
scroll left again within 2 seconds after a song or podcast has
started.
activated. See "Offline profile", p. 14.
Music player
To modify the tone of the music playback, select Options >
Play a song
Equaliser.
Select
> Applications > Music player.
To modify the balance and stereo image, or to enhance the
To add all available songs to the music library, select
bass, select Options > Audio settings.
Options > Refresh library.
26
© 2009 Nokia. All rights reserved.
Music
To view a visualisation during playback, select Options >
Tip: To improve search accuracy, use the voice
Show visualisation.
commands for dialling. The dialler adapts to your voice
and uses it also for music search.
To return to the home screen and leave the player playing in
the background, press the end key briefly.
Transfer music from PC
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
1. Ensure that a compatible memory card is inserted in the
device.
2. Connect your device to the PC using Bluetooth
connectivity or a compatible USB data cable.
Say and Play
3. If you are using a USB data cable, select Media transfer
With Say and Play, you can start playing the music you wish
by saying, for example, the artist's name.
as the connection mode.
If you select Media transfer as the connection mode, you can
use Windows Media Player to synchronise music between
your device and PC.
To start the Say and Play application, select
>
Applications > Music search. When the tone sounds, say
an artist's name, artist's name and song title, album title, or
playlist title. Hold the device about 20 cm (8 inches) from your
mouth, and speak in a regular tone. Do not cover the device
microphone with your hand.
FM Radio
When you use Say and Play for the first time, and after you
have downloaded new songs to your device, to update voice
commands, select Options > Refresh.
Listen to the radio
Select
> Applications > Radio.
The FM radio depends on an antenna other than the wireless
device antenna. A compatible headset or accessory needs to
be attached to the device for the FM radio to function
properly.
The voice commands are based on the metadata (artist's
name and song title) of the songs in your device. Say and Play
supports two spoken languages: English and the language
you have chosen as the device language. The written
language of the song metadata must match either English or
your chosen device language.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing. Do not hold the device near your ear when the
© 2009 Nokia. All rights reserved.
27
Positioning
loudspeaker is in use, because the volume may be extremely ● Activate loudspeaker — Listen to the radio using the
loud.
loudspeaker.
● Manual tuning — Change the frequency manually.
● Station directory — View available stations based on
location (network service).
The quality of the radio broadcast depends on the coverage
of the radio station in that particular area.
You can make a call or answer an incoming call while listening
to the radio. The radio is muted when there is an active call.
● Save station — Save the station to which you are
currently tuned to your station list.
● Stations — Open the list of your saved stations.
● Play in background — Return to the home screen while
listening to the FM radio in the background.
To start a station search, select
or
.
If you have saved radio stations in your device, to go to the
next or previous saved station, select
Select Options and from the following:
6. Positioning
or
.
Any GPS should not be used for precise location
measurement, and you should never rely solely on location
data from the GPS receiver and cellular radio networks for
positioning or navigation.
About GPS
The coordinates in the GPS are expressed using the
international WGS-84 coordinate system. The availability of
the coordinates may vary by region.
The trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely responsible
for its accuracy and maintenance. The accuracy of location
data can be affected by adjustments to GPS satellites made
by the United States government and is subject to change
with the United States Department of Defense civil GPS policy
and the Federal Radionavigation Plan. Accuracy can also be
affected by poor satellite geometry. Availability and quality
of GPS signals may be affected by your location, buildings,
natural obstacles, and weather conditions. The GPS receiver
should only be used outdoors to allow reception of GPS
signals.
Different positioning methods can be enabled or disabled in
positioning settings.
Assisted GPS (A-GPS)
Your device also supports assisted GPS (A-GPS).
A-GPS is a network service.
Assisted GPS (A-GPS) is used to retrieve assistance data over
a packet data connection, which assists in calculating the
28
© 2009 Nokia. All rights reserved.
Positioning
purchase licences for traffic information and navigation
coordinates of your current location when your device is
receiving signals from satellites.
services, if available for your country or region.
When you activate A-GPS, your device receives useful satellite When you use Maps for the first time, you may need to select
network. With the help of assisted data, your device can
obtain the GPS position faster.
an internet access point for downloading maps.
If you browse to an area which is not covered by maps already
downloaded in your device, a map for the area is
Your device is preconfigured to use the Nokia A-GPS service,
automatically downloaded through the internet. Some maps
may be available in your device or on a memory card. You can
if no service provider-specific A-GPS settings are available.
The assistance data is retrieved from the Nokia A-GPS service also use the Nokia Map Loader PC software to download
server only when needed.
maps. To install Nokia Map Loader to a compatible PC, go to
To disable the A-GPS service, select
> Applications >
GPS data and Options > Positioning settings >
Tip: To avoid data transfer costs, you can also use Maps
without an internet connection, and browse the maps
saved in your device or on the memory card.
Positioning methods > Assisted GPS > Disable.
You must have an internet access point defined in the device
to retrieve assistance data from the Nokia A-GPS service over
a packet data connection. The access point for A-GPS can be
defined in positioning settings. Only a packet data internet
access point can be used. Your device asks you to select the
internet access point when GPS is used for the first time.
Note: Downloading maps may involve the
transmission of large amounts of data through your service
provider’s network. Contact your service provider for
information about data transmission charges.
Almost all digital cartography is inaccurate and incomplete
to some extent. Never rely solely on the cartography that you
download for use in this device.
Maps
Select
> Maps.
Traffic and guide information and related services are
generated by third parties independent of Nokia. The
information may be inaccurate and incomplete to some
extent and is subject to availability. Never rely solely on the
aforementioned information and related services.
About Maps
With Maps, you can see your current location on the map,
browse maps of different cities and countries, search for
places, plan routes from one location to another, save
locations, and send them to compatible devices. You can also
© 2009 Nokia. All rights reserved.
29
Positioning
For instructions on how to use the various features of Maps,
The data transfer indicator
shows the internet
select
> Applications > Help > Help and Maps, or
connection used, and the amount of data transferred since
the application started.
when using Maps, select Options > Support > Help.
Move on a map
Landmarks
When the GPS connection is active,
shows your current
With Landmarks, you can save the position information of
specific locations in your device. You can sort the saved
locations into different categories, such as business, and add
other information to them, such as addresses. You can use
your saved landmarks in compatible applications, such as GPS
data.
location on the map.
To zoom in to your current or last known location, select
Options > My position.
To move on the map, scroll up, down, left, or right with the
scroll key. The map is oriented towards north by default.
Select
> Applications > Landmarks.
When you have an active GPS connection and browse the map
on the display, a new map is automatically downloaded if you
scroll to an area not covered by the maps that have already
been downloaded. The maps are automatically saved in the
device memory or on a compatible memory card, if inserted.
The coordinates in the GPS are expressed using the
international WGS-84 coordinate system.
Select Options and from the following:
● New landmark — Create a new landmark. To make a
positioning request for your current location, select
Current position. To select the location from the map,
select Select from map. To enter the position information
manually, select Enter manually.
To change the map type, select Options > Map mode.
Display indicators
The GPS indicator
shows the availability of the
● Edit — Edit or add information to a saved landmark (for
example, a street address).
satellite signals. Onebar isone satellite. Whenthedevice tries
to find satellite signals, the bar is yellow. When the device
receives enough data from the satellites for GPS to calculate
your location, the bar turns green. The more green bars, the
more reliable the location calculation.
● Add to category — Add a landmark to a category in
Landmarks. Select each category to which you want to add
the landmark.
● Send — Send one or several landmarks to a compatible
device. Your received landmarks are placed in the Inbox
folder in Messaging.
Initially, your device must receive signals from at least four
satellites to calculate your location. After the initial
calculation, signals from three satellites may be enough.
30
© 2009 Nokia. All rights reserved.
Write text
You can sort your landmarks into preset categories, and
create new categories. To edit and create new landmark
categories, open the categories tab, and select Options >
Edit categories.
To set your trip destination, select Options > Set
destination and a landmark as the destination, or enter the
latitude and longitude coordinates.
To clear the destination set for your trip, select Stop
navigation.
GPS data
Trip meter
Route guidance
Select
> Applications > GPS data and Trip distance.
Select
> Applications > GPS data and Navigation.
The trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
Start the route guidance outdoors. If started indoors, the GPS
receiver may not receive the necessary information from the
satellites.
To turn trip distance calculation on or off, select Options >
Start orStop. The calculated values remain on the display.
Use this feature outdoors to receive a better GPS signal.
To set the trip distance and time and average and maximum
speeds to zero, and to start a new calculation, select
Options > Reset. To set the trip meterandtotal timeto zero,
select Restart.
Route guidance uses a rotating compass on the device
display. A red ball shows the direction to the destination, and
the approximate distance to it is shown inside the compass
ring.
Route guidance is designed to show the straightest route and
the shortest distance to the destination, measured in a
straight line. Any obstacles on the route, such as buildings
and natural obstacles, are ignored. Differences in altitude are
not taken into account when calculating the distance. Route
guidance is active only when you move.
7. Write text
and all the other letters are automatically written in
Traditional text input
lowercase.
indicates the number mode.
is shown on the top right of the display when you are
To write text with the keypad, press a number key 2-9
repeatedly until the desired character appears. There are
more characters available for a number key than are printed
on the key. If the next letter is located on the same key as the
writing text using traditional text input.
and
indicate the selected case.
indicates
that the first letter of the sentence is written in uppercase
© 2009 Nokia. All rights reserved.
31
Write text
present one, wait until the cursor appears, and enter the
If the word is not correct, press * repeatedly to view the
letter.
matching words the dictionary has found.
If the ? character is shown after the word, the word you
intended to write is not in the dictionary. To add a word
to the dictionary, select Spell, enter the word (up to 32
letters) using traditional text input, and select OK. The
word is added to the dictionary. When the dictionary is
full, the new word replaces the oldest added word.
To insert a number, press and hold the number key.
To switch between the upper and lower case mode and the
number mode, press #.
To erase a character, press the clear key. Press and hold the
clear key to erase more than one character.
Write the first half of a compound word; to confirm it, scroll
right. Write the last part of the compound word. To complete
the compound word, press 0 to add a space.
To erase a character, press the backspace key. Press and hold
the backspace key to erase more than one character.
To access the most common punctuation marks, press the 1
key. Press 1 repeatedly to reach the desired punctuation
mark.
To switch predictive text input off for all editors in the device,
press # twice quickly.
To add special characters, press *. Scroll to the desired
character and press the scroll key.
Change the writing language
When you are writing text, you can change the writing
language. For example, if you press the 6 key repeatedly to
reach a specific character, changing the writing language
gives you access to characters in a different order.
To insert a space, press 0. To move the cursor to the next line,
press 0 three times.
To switch between the different character cases, press #.
If you are writing text using a non-Latin alphabet and want
Predictive text input
to write Latin characters, for example e-mail or web
addresses, you may need to change the writing language. To
change the writing language, select Options > Writing
language, and a writing language that uses Latin characters.
1. To activate predictive text input, press # twice quickly.
This activates predictive text input for all editors in the
device. The indicator
is shown on the display.
2. To write the desired word, press 2-9. Press each key only
once for one letter.
3. When you have finished writing the word and it is correct,
scroll right to confirm it, or press 0 to add a space.
32
© 2009 Nokia. All rights reserved.
Messaging
To delete the selected text, press the clear key C.
Copy and delete text
3. To paste the text, scroll to the desired location, press and
1. To select letters and words, press and hold #, and at the
same time scroll left or right. To select lines of text, press
and hold #, and at the same time scroll up or down.
hold #, and at the same time select Paste.
2. To copy the text, press and hold #, and at the same time
8.selMecteCospsy.aging
Select
> Messaging.
The device may recognise the SIM card provider and
automatically configure some of the message settings. If not,
you may need to define the settings manually; or contact your
service provider to configure the settings.
In Messaging (network service), you can send and receive
text, multimedia, audio, and e-mail messages. You can also
receive web service messages, cell broadcast messages, and
special messages containing data, and send service
commands.
The appearance of a picture message may vary depending on
the receiving device.
The available messaging types may vary. For more
Only devices that have compatible features can receive and
display multimedia messages. The appearance of a message
may vary depending on the receiving device.
information, contact your service provider.
Before sending or receiving messages, you may need to do
the following:
Write and send messages
● Insert a valid SIM card in the device and be located in the
service area of a cellular network.
Select
> Messaging.
● Verify that the network supports the messaging features
you want to use and that they are activated on your SIM
card.
Important: Exercise caution when opening messages.
Messages may contain malicious software or otherwise be
harmful to your device or PC.
● Define the internet access point settings on the device.
● Define the e-mail account settings on the device.
● Define the text message settings on the device.
● Define the multimedia message settings on the device.
Before you can create a multimedia message or write an e-
mail, you must have the correct connection settings in place.
© 2009 Nokia. All rights reserved.
33
Messaging
The wireless network may limit the size of MMS messages. If
the inserted picture exceeds this limit the device may make
it smaller so that it can be sent by MMS.
some other file to the message, select Options > Insert
content > Insert other.
6. To capture an image or record a video or sound clip for a
multimedia message, select Options > Insert
content > Insert image > New, Insert video clip >
New, or Insert sound clip > New.
Check the size limit of e-mail messages with your service
provider. If you attempt to send an e-mail message that
exceeds the size limit of the e-mail server, the message is left
in the Outbox folder, and the device attempts to resend it
periodically. Sending an e-mail requires a data connection,
and continuous attempts to resend the e-mail may increase
your data transfer costs. In the Outbox folder, you can delete
such a message, or move it to the Drafts folder.
7. To add an attachment to an e-mail, select Options and
the attachment type. E-mail attachments are indicated by
.
8. To send the message, select Options > Send, or press
the call key.
1. Select New message > Message to send a text or
multimedia message (MMS), Audio message to send a
multimedia message that includes one sound clip, or E-
mail to send an e-mail message.
Note: The message sent icon or text on your device
screen does not indicate that the message is received at the
intended destination.
2. In the To field, press the scroll key to select recipients or
groups from the contacts list, or enter the recipient’s
phone number or e-mail address. To add a semicolon (;)
that separates the recipients, press *. You can also copy
and paste the number or address from the clipboard.
Your device supports text messages beyond the limit for a
single message. Longer messages are sent as two or more
messages. Your service provider may charge accordingly.
Characters with accents or other marks, and characters from
some language options, take up more space, and limit the
number of characters that can be sent in a single message.
3. In the subject field, enter the subject of the e-mail. To
change the fields that are visible, select Options >
Message header fields.
You may not be able to send video clips that are saved in the
MP4 file format or that exceed the size limit of the wireless
network in a multimedia message.
4. In the message field, write the message. To insert a
template or note, select Options > Insert content >
Insert text > Template or Note.
5. To add a media file to a multimedia message, select
Options > Insert content, the file type or source, and
the desired file. To insert a business card, slide, note, or
34
© 2009 Nokia. All rights reserved.
Messaging
3. In the Subject field, enter the subject of the e-mail.
E-mail
4. Enter your message in the text area.
Set up your e-mail
5. Select Options and from the following:
With the Nokia e-mail wizard, you can set up your corporate
e-mail account, such as Microsoft Outlook, Mail for Exchange,
or Intellisync, and your internet e-mail account.
● Add attachment — Add an attachment to the
message.
● Priority — Set the priority of the message.
● Flag — Flag the message for follow-up.
● Insert template — Insert text from a template.
● Add recipient — Add recipients to the message from
Contacts.
Whensettingup your corporate e-mail, you maybeprompted
for the name of the server associated with your e-mail
address. Ask your company IT department for details.
1. To start the wizard, go to the home screen, scroll to the
e-mail wizard, and press the scroll key.
● Editing options — Cut, copy, or paste the selected
text.
2. Enter your e-mail address and password. If the wizard is
not able to configure your e-mail settings automatically,
you need to select your e-mail account type and enter the
related account settings.
● Writing language: — Select the writing language.
6. Select Options > Send.
If your device contains any additional e-mail clients, those
Add attachments
are offered to you when you start the e-mail wizard.
Select
> Messaging.
To write an e-mail message, select your mailbox and
Send e-mail
Options > Create email.
Select
> Messaging.
To add an attachment to the e-mail message, select
1. Select your mailbox and Options > Create email.
Options > Add attachment.
2. In the To field, enter the recipient's e-mail address. If the
recipient's e-mail address can be found in Contacts, start
entering the recipient's name, and select the recipient
from the proposed matches. If you add several recipients,
insert ; to separate the e-mail addresses. Use the Cc field
to send a copy to other recipients, or the Bcc field to send
a blind copy to recipients. If the Bcc field is not visible,
select Options > More > Show Bcc field.
To remove the selected attachment, select Options >
Remove attachment.
Read e-mail
Select
> Messaging.
© 2009 Nokia. All rights reserved.
35
Messaging
Reply to a meeting request
Important: Exercise caution when opening messages.
Select
> Messaging and a mailbox.
Messages may contain malicious software or otherwise be
harmful to your device or PC.
You can reply to meeting requests only if you have activated
calendar data synchronisation.
To read a received e-mail message, select the mailbox, and
Select a received meeting request, Options, and from the
select the message from the list.
following:
To reply to the message sender, select Options > Reply. To
reply to the sender and all other recipients, select Options >
Reply to all.
● Accept — Accept the meeting request.
● Decline — Decline the meeting request.
● Forward — Forward the meeting request to another
recipient.
To forward the message, select Options > Forward.
● Remove from calendar — Remove a cancelled meeting
from your calendar.
Download attachments
Select
> Messaging and a mailbox.
Search for e-mail messages
To view the attachments in a received e-mail message, scroll
to the attachment field, and select Options > Actions. If
there is one attachment in the message, select Open to open
the attachment. If there are several attachments, select View
list to see a list showing which attachments have been
downloaded or not.
Select
> Messaging and a mailbox.
To search for items within the recipients, subjects, and body
texts of the e-mail messages in the mailbox, select Options >
Search.
To stop the search, select Options > Stop search.
To start a new search, select Options > New search.
To download the selected attachment or all the attachments
from the list to your device, select Options > Download or
Download all. The attachments are not saved in your device,
and are deleted when you delete the message.
Delete e-mails
Select
> Messaging and a mailbox.
To save the selected attachment or all the downloaded
To delete the selected e-mail message, select Options >
Delete. The message is placed in the Deleted items folder, if
available.
attachments in your device, select Options > Save or Save
all.
To open the selected, downloaded attachment, select
Options > Actions > Open.
36
© 2009 Nokia. All rights reserved.
Contacts
To empty the Deleted items folder, select the folder and
To set on an out-of-office reply, select your mailbox and,
Options > Empty deleted items.
depending on your mailbox type, either Options >
Settings > Mailbox settings > Out of office > On or
Options > Settings > Intellisync > Mailbox settings >
Out of office > On.
Switch between e-mail folders
Select
> Messaging and a mailbox.
To enter the text for the reply, select Out of office reply.
To open another e-mail folder or mailbox, select Inbox at the
top of the display. Select the e-mail folder or mailbox from
the list.
General e-mail settings
Select
> Messaging, mailbox, and Options >
Settings > Global settings and from the following:
Disconnect from the mailbox
● Message list layout — Select whether the e-mail
messages in Inbox display one or two lines of text.
● Body text preview — Select whether to preview
messages when scrolling through the list of e-mail
messages in Inbox.
Select
> Messaging and a mailbox.
To cancel the synchronisation between the device and the e-
mail server, and to work with e-mail without a wireless
connection, select Options > Disconnect. If your mailbox
does not have the Disconnect option, select Options >
Exit to disconnect from the mailbox.
● Title dividers — Select On to be able to expand and
collapse the list of e-mail messages.
To start the synchronisation again, select Options >
● Download notifications — Select whether to have the
device to display anotificationwhenan e-mail attachment
has been downloaded.
Connect.
● Home screen — Define how many lines of e-mail are
shown in the home screen information area.
Set on an out-of-office reply
Select
> Messaging.
9. Contacts
addresses of your contacts. You can add a personal ringing
tone or a thumbnail image to a contact. You can also create
contact groups, which allow you to communicate with
several contacts at the same time, and send contact
information to compatible devices.
About Contacts
Select
> Contacts.
With Contacts, you can save and update contact information,
such as phone numbers, home addresses, and e-mail
© 2009 Nokia. All rights reserved.
37
Gallery
● Conf. service number — Enter the conference call service
number.
Whenever you see the
icon, scroll right to access a list of
available actions. To close the list, scroll left.
● Conf. service ID — Enter the conference call ID.
● Conf. service PIN — Enter the conference call PIN code.
To make a conference call to the group using the conference
service, select the group, scroll right, and select Call conf.
service.
Work with contacts
Select
> Contacts.
To create a contact, select Options > New contact, and
enter the details of the contact.
To copy contacts from the memory card, if available, select
Add ringing tones for contacts
Options > Create backup > Memory card to phone.
Select
> Contacts.
To search for contacts, start entering the contact's name in
To add a ringing tone for a contact, select the contact,
Options > Ringing tone, and a ringing tone. The ringing
tone sounds when the contact calls you.
the search field.
Create contact groups
To add a ringing tone for a contact group, select the contact
group, Options > Group > Ringing tone, and a ringing
tone.
Select
> Contacts.
1. To create a contact group, scroll to each contact you want
to add to the group, and select Options > Mark/
Unmark > Mark.
To remove the ringing tone, select Default tone from the list
of ringing tones.
2. Select Options > Group > Add to group > Create new
group, and enter a name for the group.
If you want to make conference calls to the group using a
conference service, define the following:
10. Gallery
Select
> Gallery.
sound clips are automatically saved to Gallery. Sound clips
and music are played in the Music player, streaming links by
the Video centre. Images are viewed and videos are played
with the Photos application.
Use Gallery to access different types of media, such as images
and videos, music, sound clips, streaming links and
presentations. All viewed images and videos, and music and
38
© 2009 Nokia. All rights reserved.
Camera
● Downloads — View items and video clips downloaded
About Gallery
from the web or received as a multimedia or e-mail
Select
> Gallery > Images & videos and from the
message.
following:
● Share online — Post your images or video clips to the
web.
● Captured — View all the images and video clips you have
captured.
Files stored on your compatible memory card (if inserted) are
● Months — View images and video clips categorised by
the month they were captured.
indicated with
.
To copy or move files to another memory location, select a
● Albums — View the default albums and the ones you have
created.
file, Options > Move and copy, and the appropriate option.
● Tags — View the tags you have created for each item.
11. Camera
Select the flash mode (images only).
Activate the self-timer (images only).
Activate sequence mode (images only).
Select a colour effect.
Capture an image
To activate the camera, press and hold the capture key. When
the camera is activated, the screen is automatically rotated
to landscape mode.
To capture an image, use the display as a viewfinder, and
Adjust the white balance.
press the capture key. The device saves the image in Gallery.
Go to Gallery.
To zoom in or out before capturing an image, use the volume
keys.
The available options vary depending on the capture mode
and view you are in. The settings return to the default values
when you close the camera.
The toolbar provides you with shortcuts to different items
and settings before and after capturing an image or
recording a video clip. Select from the following:
To customise the camera toolbar, select Options >
Customise toolbar.
Switch between video and image mode.
Select the scene.
Turn the video light on (video mode only).
To activate the toolbar when it is hidden, press the scroll key.
© 2009 Nokia. All rights reserved.
39
Internet
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
2. To start recording, press the capture key.
3. To pause recording at any time, select Pause. Select
Continue to resume recording.
4. To stop recording, select Stop. The video clip is
automatically saved in Gallery. The maximum length of
the video clip depends on the available memory.
Record videos
1. If the camera is in the image mode, select the video mode
from the toolbar.
12. Internet
With your device, you can browse both the internet and your To browse the web, in the bookmarks view, select a
company's intranet, and download and install new
applications to your device. You can also use your device as
a modem and connect your PC to the internet.
bookmark, or start to enter a web address (the field opens
automatically), and select Go to.
Some web pages may contain material, such as graphics and
sounds, that requires a large amount of memory to view. If
your device runs out of memory while loading such a web
page, the graphics on the page are not shown.
Web browser
With the Web browser application, you can view hypertext
markup language (HTML) web pages on the internet as
originally designed. You can also browse web pages that are
designed specifically for mobile devices, and use extensible
hypertext markup language (XHTML), or the wireless markup
language (WML).
To browse web pages with graphics disabled, to save
memory and increase the page loading speed, select
Options > Settings > Page > Load content > Text
only.
To enter a web address, select Options > Go to > New web
To browse the web, you need to have an internet access point
page.
configured in your device.
Tip: While browsing, to visit a web page saved as a
bookmark in the bookmarks view, press 1, and select
a bookmark.
Browse the web
Select
> Web.
To refresh the content of the web page, select Options >
Shortcut: To start the browser, press and hold 0 in the
Web page options > Reload.
home screen.
40
© 2009 Nokia. All rights reserved.
Internet
To save the current web page as a bookmark, select
To define whether the web feeds are updated automatically,
in the Web feeds view, select Options > Edit > Edit. This
option is not available if one or more feeds are marked.
Options > Web page options > Save as bookmark.
To view snapshots of the web pages you have visited during
the current browsing session, select Back (available if
History list is activated in the browser settings and the
current web page is not the first web page you visit).
Empty the cache
The information or services you have accessed are stored in
the cache memory of the device.
To prevent or allow the automatic opening of multiple
windows, select Options > Web page options > Block
pop-ups or Allow pop-ups.
A cache is a memory location that is used to store data
temporarily. If you have tried to access or have accessed
confidential information requiring passwords, empty the
cache after each use.
To view the shortcut key map, select Options > Keypad
shortcuts. To edit the shortcut keys, select Edit.
To empty the cache, select Options > Clear privacy data >
Tip: To minimise the browser without exiting the
application or connection, press the end key once. To
end the connection, press and hold the end key.
Cache.
End the connection
To end the connection and close the browser, select
Web feeds and blogs
Options > Exit.
Select
> Web.
To delete the information the network server collects about
your visits to various web pages, select Options > Clear
privacy data > Cookies.
Web feeds are XML files on web pages that are used to share,
for example, the latest news headlines or blogs. It is common
to find web feeds on web, blog, and wiki pages.
The browser application automatically detects if a web page
Connection security
contains web feeds.
If the security indicator ( ) is displayed during a connection,
the data transmission between the device and the internet
gateway or server is encrypted.
If web feeds are available, to subscribe to a web feed, select
Options > Subscribe to web feeds.
To update a web feed, in the Web feeds view, select a feed
The security icon does not indicate that the data transmission
between the gateway and the content server (or the place
where the requested resource is stored) is secure. The service
and Options > Web feed options > Refresh.
© 2009 Nokia. All rights reserved.
41
Internet
provider secures the data transmission between the gateway 3. Accept the installation in your PC. Accept also the
and the content server.
connection, if prompted. When the connection to the web
is established, the web browser of your PC opens.
Security certificates may be required for some services, such
as banking services. You are notified if the identity of the
server is not authentic or if you do not have the correct
security certificate in your device. For more information,
contact your service provider.
You must have administrator rights to your PC, and the
autorun option enabled in the PC.
Share online
About Share online
Important: Even if the use of certificates makes the
Select
> Applications > Share online.
risks involved in remote connections and software
installation considerably smaller, they must be used correctly With Share online, you can post images, video clips, and
in order to benefit from increased security. The existence of
a certificate does not offer any protection by itself; the
certificate manager must contain correct, authentic, or
trusted certificates for increased security to be available.
Certificates have a restricted lifetime. If "Expired certificate"
or "Certificate not valid yet" is shown, even if the certificate
should be valid, check that the current date and time in your
device are correct.
sound clips from your device to compatible online sharing
services, such as albums and blogs. You can also view and
send comments to the posts in these services, and download
content to your compatible Nokia device.
The supported content types and the availability of the Share
online service may vary.
Subscribe to services
Before changing any certificate settings, you must make sure
that you really trust the owner of the certificate and that the
certificate really belongs to the listed owner.
Select
> Applications > Share online.
To subscribe to an online sharing service, go to the service
provider's website, and check that your Nokia device is
compatible with the service. Create an account as instructed
on the website. You receive a user name and password
needed to set up your device with the account.
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
1. To activate a service, open the Share online application in
device and your PC.
your device, select a service and Options > Activate.
2. Select Connect PC to web. The necessary software is
automatically installed from your device to the PC.
42
© 2009 Nokia. All rights reserved.
Internet
2. Allow the device to create a network connection. If you
are prompted for an internet access point, select one from
the list.
To send the post to the service, select Options > Upload.
Nokia Video Centre
3. Sign in to your account as instructed on the service
With Nokia Video Centre (network service), you can download
and stream video clips over the air from compatible internet
video services using a packet data connection. You can
transfer video clips from a compatible PC to your device and
view them in Video centre.
provider’s website.
Nokia's services in the online sharing service are free of
charge. Any data transferred over the network may incur
charges from your service provider. For the availability and
cost of the third party services and datatransfer costs, contact
your service provider or the relevant third party.
Using packet data access points to download videos may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Create a post
Select
> Applications > Share online.
Your device may have predefined services.
To post multimedia files to a service, select a service and
Options > New post. If the online sharing service provides
channels for posting files, select the desired channel.
Service providers may provide free content or charge a fee.
Check the pricing in the service or from the service provider.
To add an image, video clip, or sound clip to the post, select
View and download video clips
Connect to video services
Options > Insert.
To add a title or description to the post, enter text directly to
1. Select
> Applications > Video centre.
the fields, if available.
2. To connect to a service to install video services, select
Video directory and the desired video service from the
service catalogue.
To add tags to the post, select Tags:.
To select whether to enable the posting of location
information contained in the file, select Location:.
Tip: You can access the video services on the TV & video
tab in the multimedia menu.
To set the level of privacy for a file, select Privacy:. To allow
everyone to view your file, select Public. To restrict others
from seeing your files, select Private. You can define the
Default setting on the service provider's website.
View a video clip
To browse the content of installed video services, select
Video feeds.
© 2009 Nokia. All rights reserved.
43
Ovi services
The content of some video services is divided into categories. ● Feed details — View information about a video clip.
To browse video clips, select a category.
● Refresh list — Refresh the list of video clips.
● Open link in browser — Open a link in the web browser.
To search for a video clip in the service, select Video
search. Search may not be available in all services.
Schedule downloads
Some video clips can be streamed over the air, but others
must be first downloaded to your device. To download a
video clip, select Options > Download. Downloads
continue in the background if you exit the application. The
downloaded video clips are saved in My videos.
Setting the application to download video clips automatically
may involve the transmission of large amounts of data
through your service provider's network. For information
about data transmission charges, contact your service
provider. To schedule an automatic download for video clips
in a service, select Options > Schedule downloads. Video
centre automatically downloads new video clips daily at the
time you define.
To stream a video clip or view a downloaded one, select
Options > Play. When the video clip is playing, use the
selection keys and the scroll key to control the player. To
adjust the volume, use the volume key.
To cancel scheduled downloads, select Manual download as
the download method.
Warning: Listen to music at a moderate level.
Continuous exposure to high volume may damage your
hearing.
Search
Select
> Search.
Select Options and from the following:
Search enables you to use various internet-based search
services to find and connect to, for example, local services,
websites, and images. The content and availability of the
services may vary.
● Resume download — Resume a paused or failed
download.
● Cancel download — Cancel a download.
● Preview — Preview a video clip.
13. Ovi services
Nokia Ovi Suite offers a new, more user-friendly approach to
Nokia PC software. The PC application gives you an easy
access to the files on your computer, your Nokia device, and
Ovi all within a single window.
Visit Ovi
your own Nokia account.
44
© 2009 Nokia. All rights reserved.
Personalisation
For more information on how to use the services, see the
support pages of each service.
information is stored and kept up-to-date both in your device
and on the web. With Ovi Contacts, you can make your
contacts list dynamic and be confident that your contacts are
stored on Ovi.com.
About Ovi Store
You must have a Nokia Account to use the service. Create an
In Ovi Store, you can download mobile games, applications,
videos, images, and ringing tones to your device. Some of the
items are free of charge; others you need to purchase using
your credit card or through your phone bill. Ovi Store offers
you content that is compatible with your mobile device and
relevant to your tastes and location.
PC.
Using Ovi Contacts may involve the transmission of large
amounts of data through your service provider's network.
Contact your network service provider for information about
data transmission charges.
The content in Ovi Store is sorted into the following
categories:
About Ovi Files
● Recommended
● Games
Select
> Applications.
With Ovi Files, you can use your device to access files on your
computer. Install the Ovi Files application on every computer
you want to access with Ovi Files.
● Personalisation
● Applications
● Audio & video
You can carry out the following tasks:
● Search and view images and documents stored on your
About Ovi Contacts
computer.
With Ovi Contacts, you can stay connected to the people who
matter most. Search for contacts, and discover friends in the
Ovi community. Keep in touch with your friends - chat, share
your location and presence, and easily follow what your
friends are up to and where they are. You can even chat with
friends who use Google Talk™.
● Transfer songs from your computer to your device.
● Send files and folders from your computer without
transferring them to your device first.
● Access files on your computer even when your computer
is switched off. Just select which folders and files you want
to be available, and Ovi Files automatically keeps an up-
to-date copy stored in a protected online storage.
You can also sync your contacts, calendar, and other content
between your Nokia device and Ovi.com. Your important
© 2009 Nokia. All rights reserved.
45
Personalisation
14. Personalisation
Themes
Profiles
Select
> Settings > Profiles.
Change the display theme
You can adjust and customise the ringing tones, alert tones,
and other device tones for different events, environments, or
caller groups. The active profile is shown at the top of the
display in the home screen. However, if the active profile is
General, only today's date is shown.
Select
> Settings > Themes.
To change the theme used in all applications, select
General.
To change the theme used in the main menu, select Menu
view.
To create a new profile, select Options > Create new, and
To change the theme used in the home screen, select
define the settings.
Standby theme.
To customise a profile, select a profile and Options >
To change the background image of the home screen, select
Personalise.
Wallpaper.
To change a profile, select a profile and Options >
Activate. The Offline profile prevents your device from
accidentally switching on, sending or receiving messages, or
using Bluetooth connectivity, GPS, or FM radio; it also closes
any internet connection that may be in operation when the
profile is selected. The Offline profile does not prevent you
from establishing a Bluetooth connection at a later time, or
from restarting the GPS or FM radio, so comply with any
applicable safety requirements when establishing and using
these features.
To select an animation for the screen saver, select Power
saver.
To turn theme effects on or off, select General > Options >
Theme effects.
Download a theme
To download a theme, select General or Menu view >
Download themes. Enter the link from which you want to
download your theme. Once the theme is downloaded, you
can preview, activate, or edit it.
To set the profile to be active until a certain time within the
next 24 hours, scroll to the profile, select Options >
Timed, and set the time. When the time expires, the profile
changes back to the previously active non-timed profile.
To preview a theme, select Options > Preview.
To start using the selected theme, select Options > Set.
46
© 2009 Nokia. All rights reserved.
Time management
To delete a profile that you created, select Options > Delete
When the profile is timed, is displayed in the home screen.
The Offline profile cannot be timed.
profile. You cannot delete the predefined profiles.
15. Time management
● Memo entries are related to the whole day but not to a
Calendar
specific time of the day.
About Calendar
● Anniversary entries remind you of birthdays and special
dates. They refer to a certain day but not a specific time of
the day. Anniversary entries are repeated every year.
Select
> Calendar.
With calendar, you can create and view scheduled events and
appointments, and switch between different calendar views.
● To-do entries remind you of a task that has a due date but
not a specific time of the day.
In the month view, calendar entries are marked with a
triangle. Anniversary entries are also marked with an
exclamation mark. The entries of the selected day are
displayed as a list.
To create a calendar entry, select a date, Options > New
entry, and the entry type.
To set the priority for meeting entries, select Options >
To open calendar entries, select a calendar view and an entry.
Priority.
Whenever you see the
icon, scroll right to access a list of
To define how the entry is handled during synchronisation,
select Private to hide the entry from viewers if the calendar
is available online, Public to make the entry visible to
viewers, or None to not copy the entry to your computer.
available actions. To close the list, scroll left.
Create calendar entries
Select
> Calendar.
To send the entry to a compatible device, select Options >
Send.
You can create the following types of calendar entries:
● Meeting entries remind you of events that have a specific
To make a meeting request of a meeting entry, select
date and time.
Options > Add participants.
● Meeting requests are invitations that you can send to the
participants. Before you can create meeting requests you
must have a compatible mailbox configured to your
device.
Alarm clock
Select
> Applications > Clock.
© 2009 Nokia. All rights reserved.
47
Office applications
To view your active and inactive alarms, open the alarms tab.
To set a new alarm, select Options > New alarm. Define the
repetition, if needed. When an alarm is active, is displayed.
Clock settings
Select Options > Settings.
To change the time or date, select Time or Date.
To turn off the sounding alarm, select Stop. To stop the alarm
for a certain time period, select Snooze. If your device is
switched off when an alarm is due, your device switches itself
on and starts sounding the alarm tone.
To change the clock shown on the home screen, select Clock
type > Analogue or Digital.
To allow the mobile phone network to update the time, date,
and time zone information to your device (network service),
select Automatic time update > On.
Tip: To define the time period after which the alarm
sounds again when you set it to snooze, select
Options > Settings > Alarm snooze time.
To change the alarm tone, select Clock alarm tone.
To cancel an alarm, select Options > Remove alarm.
To change the time, date, and clock type settings, select
Options > Settings.
To automatically update the time, date, and time zone
information to your device (network service), select
Options > Settings > Automatic time update > On.
16. Office applications
To translate words from one language to another, enter text
in the search field. As you enter text, suggestions of words to
translate are displayed. To translate a word, select the word
from the list.
PDF reader
Select
> Applications > Office > Adobe PDF.
With PDF reader, you can read PDF documents on the display
of your device; search for text in the documents; modify
settings, such as zoom level and page views; and send PDF
files using e-mail.
Select Options and from the following:
● Listen — Listen to the selected word.
● History — Find previously translated words from the
current session.
Dictionary
● Languages — Change the source or target language.
Select
> Applications > Office > Dictionary.
48
© 2009 Nokia. All rights reserved.
Office applications
● Languages — Download languages from the internet or exchange rates. The default base currency is Home. The rate
of the base currency is always 1.
remove a language from the dictionary. You cannot
remove the English language from the dictionary. You can
have two additional languages installed, besides English.
● Speech — Edit the voice feature settings. You can adjust
the speed and volume of the voice.
1. Select Options > Currency rates.
2. The default name for the currency items is Foreign. To
rename a currency, select Options > Rename
currency.
3. Add the exchange rates for the currencies, and select
About Quickoffice
Done.
Select
> Applications > Office > Quickoffice.
4. In the other Unit field, select the currency to which you
Quickoffice consists of Quickword for viewing Microsoft Word
want to convert.
documents, Quicksheet for viewing Microsoft Excel
5. In the first Amount field, enter the value you want to
convert. The other Amount field shows the converted
value automatically.
worksheets, Quickpoint for Microsoft PowerPoint
presentations, and Quickmanager for purchasing software.
You can view Microsoft Office 2000, XP, and 2003 documents
(DOC, XLS, and PPT file formats) with Quickoffice. If you have
the editor version of Quickoffice, you can also edit files.
To change the base currency, select Options > Currency
rates, a currency and Options > Set as base currency.
When you change base currency, you must enter new
exchange rates because all previously set exchange rates are
cleared.
Not all file formats or features are supported.
Converter
With Converter, you can convert measures from one unit to
another.
Convert measures
Select
> Applications > Office > Converter.
The converter has limited accuracy, and rounding errors may
1. In the Type field, select the measure you want to use.
occur.
2. In the first Unit field, select the unit from which you want
to convert.
Currency converter
3. In the other Unit field, select the unit to which you want
to convert.
Select
> Applications > Office > Converter.
Select Type > Currency. Before you can make currency
conversions, you must select a base currency and add
© 2009 Nokia. All rights reserved.
49
Office applications
4. In the first Amount field, enter the value you want to
Active notes
convert.
Active notes allows you to create notes that contain images
and sound or video clips. You can also link a note to a contact.
The note is displayed during a call with the contact.
The other Amount field shows the converted value
automatically.
Calculator
Create and edit notes
Select
> Applications > Office > Calculator.
Select
> Applications > Office > Active notes.
This calculator has limited accuracy and is designed for
To create a note, start writing.
simple calculations.
To edit a note, select the note and Options > Editing
To make a calculation, enter the first number of the
calculation. Select a function such as add or subtract from the
function map. Enter the second number of the calculation,
and select =. The calculator performs operations in the order
they are entered. The result of the calculation remains in the
editor field and can be used as the first number of a new
calculation.
options.
Select Options and from the following:
● Insert object — Insert images, sound or video clips,
business cards, web bookmarks, and files.
● Insert new — Add new items to the note. You can record
sound and video clips, and capture images.
● Send — Send the note.
The device saves the result of the last calculation in its
memory. Exiting the Calculator application or switching off
the device does not clear the memory. To recall the last saved
result the next time you open the Calculator application,
select Options > Last result.
● Link note to call — Select Add contacts to link a note to
a contact. The note is displayed when making a call to or
receiving a call from the contact.
Settings for Active notes
To save the numbers or results of a calculation, select
Select
> Applications > Office > Active notes and
Options > Memory > Save.
Options > Settings.
To retrieve the results of a calculation from the memory and
use them in a calculation, select Options > Memory >
Recall.
To select where to save notes, select Memory in use and the
desired memory.
To change the layout of active notes, or to view the notes as
a list, select Change view > Grid or List.
50
© 2009 Nokia. All rights reserved.
Settings
To see a note in the background when making or receiving
● Open — Open the note.
phone calls, select Show note during call > Yes.
● Send — Send the note to other compatible devices.
● Delete — Delete a note. You can also delete several notes
at once. To mark each note you want to delete, select
Options > Mark/Unmark, and delete the notes.
● Synchronisation — Synchronise the notes with
compatible applications on a compatible device, or define
the synchronisation settings.
Tip: If you temporarily do not want to see notes during
phone calls, select Show note during call > No. This
way you do not have to remove the links between
notes and contact cards.
Notes
Write notes
Zip manager
Select
> Applications > Office > Notes. To write a
Select
> Applications > Office > Zip.
note, start entering the text. The note editor opens
With Zip manager, you can create new archive files to store
compressed ZIP formatted files; add single or multiple
compressed files or directories to an archive; set, clear, or
change the archive password for protected archives; and
change settings, such as compression level, and file name
encoding.
automatically.
You can save plain text files (.txt file format) you receive to
Notes.
Manage notes
Select
> Applications > Office > Notes.
You can save the archive files in the device memory or on a
memory card.
Select Options and from the following:
17. Settings
To change the PIN code, select Phone and SIM card > PIN
code. The new code must be 4 to 8 digits long. The PIN code
protects your SIM card against unauthorised use and is
provided with the SIM card. After three consecutive incorrect
PIN code entries, the code is blocked, and you need to use the
PUK code to unblock it before you can use the SIM card again.
Application settings
Select
> Settings > Settings and Applications.
Select an application from the list to adjust its settings.
Device and SIM card security
To set the keypad to lock automatically after a defined period,
Select
> Settings > Settings > General > Security.
select Phone and SIM card > Keypad autolock period.
© 2009 Nokia. All rights reserved.
51
Data management
To set a time-out period after which the device is
To define which profile is activated when you attach an
automatically locked and can be used only if the correct lock accessory to your device, select the accessory and Default
code is entered, select Phone and SIM card > Phone
autolock period. Enter the length of the time-out period in
minutes, or select None to deactiveate the autolock feature.
When the device is locked, you can still answer incoming calls,
and calls may still be possible to the official emergency
number programmed into your device.
profile.
To set the device to answer phone calls automatically after 5
seconds when an accessory is attached, select Automatic
answer > On. If the ringing type is set to Beep once or
Silent in the selected profile, automatic answering is
disabled.
To change the lock code, select Phone and SIM card > Lock
code. The default lock code is 12345. Enter the current code
and then the new code twice. The new code must be 4-255
characters long. Alphanumeric (uppercase and lowercase)
characters can be used. The device notifies you if the lock
code is not properly formatted.
To illuminate the device while it is attached to an accessory,
select Lights > On.
Restore original settings
Settings > Settings and General > Factory settings. To
do this, you need your device lock code. After resetting, the
device may take a longer time to switch on. Documents,
contact information, calendar entries, and files are
unaffected.
To restore the original device settings, select
>
Common accessory settings
Select
> Settings > Settings and General >
Enhancement.
With most accessories, you can do the following:
18. Data management
Bluetooth connectivity. You can use Nokia Application
Installer in Nokia Ovi Suite to install an application to your
device.
Install or remove applications
Install applications
Select
> Applications > Installations > App. mgr..
Icons in Application manager indicate the following:
SIS or SISX application
You can transfer installation files to your device from a
compatible computer, download them during browsing, or
receive them in a multimedia message, as an e-mail
attachment, or using other connectivity methods, such as
Java™ application
52
© 2009 Nokia. All rights reserved.
Data management
Messaging > Inbox, and open a message that contains
an installation file.
Important: Only install and useapplicationsandother
software from trusted sources, such as applications that are
Symbian Signed or have passed the Java Verified testing.
2. In Application manager, select Options > Install. In
other applications, select the installation file to start the
installation.
Before installation, note the following:
During installation, the device displays information about
the progress of the installation. If you install an
application without a digital signature or certification,
the device displays a warning. Continue installation only
if you are sure of the origin and contents of the
application.
● To view the application type, version number, and the
supplier or manufacturer of the application, select
Options > View details.
To displaythesecuritycertificate detailsof theapplication,
select Details: > Certificates: > View details.
● If you install a file that contains an update or repair to an
existing application, you can only restore the original
application if you have the original installation file or a full
To start an installed application, locate the application in the
menu, and select the application.
backup copy of the removed software package. To restore To see which software packages are installed or removed and
the original application, remove the application, and
install the application again from the original installation
file or the backup copy.
when, select Options > View log.
Important: Your device can only support one antivirus
application. Having more than one application with antivirus
functionality could affect performance and operation or
cause the device to stop functioning.
The JAR file is required for installing Java applications. If it
is missing, the device may ask you to download it. If there
is no access point defined for the application, you are
asked to select one. When you are downloading the JAR
file, you may need to enter a user name and password to
access the server. You obtain these from the supplier or
manufacturer of the application.
After you install applications to a compatible memory card,
installation files (.sis, .sisx) remain in the device memory. The
files may use large amounts of memory and prevent you from
storing other files. If the .sis file is a message attachment,
delete the message from the Messaging inbox.
To install software or an application, do the following:
1. To locate an installation file, select
> Applications >
Installations > App. mgr.. Alternatively, search for
Remove applications and software
installation files using File manager, or select
Select
> Applications > Installations > App. mgr..
© 2009 Nokia. All rights reserved.
53
Data management
Scroll to a software package, and select Options >
Shortcut: To apply actions to multiple items at once,
Remove. Select Yes to confirm.
mark the items. To mark or unmark items, press #.
If you remove software, you can only reinstall it if you have
the original software package or a full backup of the removed Back up files to a memory card
software package. If you remove a software package, you
may no longer be able to open documents created with that
software.
Select
> Applications > Office > File mgr..
To back up files to a memory card, select the file types you
want to back up, and Options > Back up phone memory.
Ensure that your memory card has enough free memory for
the files that you have chosen to back up.
If another software package depends on the software
package that you removed, the other software package may
stop working. For more information, see the documentation
of the installed software package.
Manage a memory card
Select
> Applications > Office > File mgr..
File manager
These options are available only if a compatible memory card
About File manager
is inserted in the device.
Select
> Applications > Office > File mgr..
Select Options and from the following:
With File manager, you can browse, manage, and open files.
The available options may vary.
● Memory card options — Rename or format a memory
card.
● Memory card password — Password protect a memory
card.
To map or delete drives, or to define settings for a compatible
remote drive connected to your device, select Options >
Remote drives.
● Unlock memory card — Unlock a memory card.
Device manager
Find and organise files
Select
> Applications > Office > File mgr..
Remote configuration
Select
> Settings > Device manager.
To find a file, select Options > Find. Enter a search term that
matches the file name.
With Device manager, you can manage settings, data, and
software on your device remotely.
To move and copy files and folders, or to create new folders,
select Options > Organise.
54
© 2009 Nokia. All rights reserved.
Data management
You can connect to a server, and receive configuration
settings for your device. You may receive server profiles and
different configuration settings from your service providers
or company information management department.
Configuration settings may include connection and other
settings used by different applications in your device. The
available options may vary.
● Allow configuration — Select Yes to allow the server to
initiate a configuration session.
● Auto-accept all requests — Select Yes if you do not want
the server to ask for your confirmation when it initiates a
configuration session.
● Network authentication — Select whether to use http
authentication.
● Network user name and Network password — Enter
your user ID and password for the http authentication.
This setting is available only if you have selected Network
authentication to be used.
The remote configuration connection is usually started by the
server when the device settings need to be updated.
To create a new server profile, select Options > Server
profiles > Options > New server profile.
To connect to the server and receive configuration settings
You may receive these settings from your service provider in
for your device, select Options > Start configuration.
a configuration message. If not, define the following:
To view the configuration log of the selected profile, select
● Server name — Enter a name for the configuration
server.
Options > View log.
● Server ID — Enter the unique ID to identify the
configuration server.
To update the device software over the air, select Options >
Settings. The update does not erase your settings. When you
receive the update package on your device, follow the
instructions on the display. Your device is restarted once the
installation is complete. Downloading software updates may
involve the transmission of large amounts of data through
your service provider's network. Contact your service
provider for information about data transmission charges.
Make sure that the device battery has enough power, or
connect the charger before starting the update.
● Server password — Enter a password to identify your
device to the server.
● Session mode — Select the preferred connection type.
● Access point — Select the access point to use for the
connection, or create a new access point. You can also
choose to be asked for the access point every time you
start a connection. This setting is available only if you have
selected Internet as the bearer type.
● Host address — Enter the web address of the
configuration server.
Update device software
● Port — Enter the port number of the server.
● User name and Password — Enter your user ID and
password for the configuration server.
Software updates may include new features and enhanced
functions that were not available at the time of purchase of
© 2009 Nokia. All rights reserved.
55
Connectivity
your device. Updating the software may also improve the
To update the device software, do the following:
device performance.
1. Download and install the Nokia Software Updater
Nokia Software Updater is a PC application that enables you
to update your device software. To update your device
software, you need a compatible PC, broadband internet
access, and a compatible USB data cable to connect your
device to the PC.
application to your PC.
2. Connect your device to the PC using a USB data cable, and
start the Nokia Software Updater application. The Nokia
Software Updater application guides you to back up your
files, update the software, and restore your files.
To get more information, to check the release notes for the
latestsoftware versions, and todownload the NokiaSoftware
y1o9ur.locaCl oNonkianweebcstitei.vity
1. Select the connection type you want to use to transfer the
data. Both devices must support the selected connection
type.
Transfer content from another device
Select
> Settings > Switch.
2. Select the device from whichyou wantto transfercontent.
You are asked to enter a code on your device. Enter a code
(1-16 digits), and select OK. Enter the same code on the
other device, and select OK. The devices are now paired.
as contacts, between two compatible Nokia devices.
The type of content that can be transferred depends on the
model of the device from which you want to transfer content.
If the other device supports synchronisation, you can also
synchronise data between the other device and your device.
Your device notifies you if the other device is not compatible.
For some device models, the Switch application is sent to
the other device as a message. To install the Switch
application on the other device, open the message, and
follow the instructions.
If the other device cannot be switched on without a SIM card,
you can insert your SIM card in it. When your device is
switched on without a SIM card, the offline profile is
automatically activated.
3. From your device, select the content you want to transfer
from the other device.
Content is transferred from the memory of the other device
to the corresponding location in your device.
Transfer content
To retrieve data from your other device for the first time:
56
© 2009 Nokia. All rights reserved.
Connectivity
the connection can be subject to interference from
Transfer time depends on the amount of data to be
transferred. You can cancel the transfer and continue later.
obstructions such as walls or other electronic devices.
The synchronisation is two-way, and the data in both devices Several Bluetooth connections can be active at a time. For
is the same. If an item is deleted from either device, it is
deleted from the other device when synchronising; you
cannot restore deleted items by synchronising.
example, if your device is connected to a headset, you can
also transfer files to another compatible device at the same
time.
This device is compliant with Bluetooth Specification 2.0 +
EDR supporting the following profiles: Advanced Audio
Distribution, Audio/Video Remote Control, Basic Imaging,
Basic Printing, Device ID, Dial-up Networking, File Transfer,
Generic Audio/Video Distribution, Generic Access, Generic
Object Exchange, Handsfree, (Human Interface Device)
Headset, Object Push, Phone Book Access, Serial Port, and SIM
Access. To ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved
accessories for this model. Check with the manufacturers of
other devices to determine their compatibility with this
device.
To view the log of the last transfer, select a shortcut in the
main view and Options > View log.
PC connections
You can use your mobile device with a variety of compatible
PC connectivity and data communications applications. With
Nokia Ovi Suite, you can, for example, transfer files and
images between your device and a compatible computer.
For more information about Ovi Suite and the download link,
Features using Bluetooth technology increase the demand on
Bluetooth
battery power and reduce the battery life.
About Bluetooth
Bluetooth technology enables wireless connections between
electronic devices within a range of 10 metres (33 feet). A
Bluetooth connection can be used to send images, videos,
text, business cards, calendar notes, or to connect wirelessly
to devices that use Bluetooth technology.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility > Hidden.
Do not pair with an unknown device.
Since devices using Bluetooth technology communicate
need to be in direct line-of-sight. The two devices only need
to be within a maximum of 10 metres of each other, although
Send and receive data with Bluetooth
Select
> Settings > Connectivity > Bluetooth.
© 2009 Nokia. All rights reserved.
57
Connectivity
1. When you activate Bluetooth connectivity for the first
all to receive data from a non-paired device or Hidden to
time, you are asked to name your device. Give your device receive data from a paired device only. When you receive data
a unique name to make it easy to recognise if there are
through Bluetooth connectivity, depending on the settings
of an active profile, a tone sounds, and you are asked if you
want to accept the message in which the data is included. If
you accept, the message is placed in the Inbox folder in the
Messaging application.
several Bluetooth devices nearby.
2. Select Bluetooth > On.
3. Select My phone's visibility > Shown to all or Define
period. If you select Define period, you need to define
the time during which your device is visible to others. Your
device and the name you entered can now be seen by
other users with devices using Bluetooth technology.
Tip: You can access the files in the device or on the
memory card using a compatible accessory that
supports the File Transfer Profile Client service (for
example, a laptop computer).
4. Open the application where the item you want to send is
A Bluetooth connection is disconnected automatically after
sending or receiving data. Only Nokia Ovi Suite and some
accessories such as headsets may maintain a connection even
if not actively used.
stored.
5. Select the item and Options > Send > Via Bluetooth.
The device searches for other devices using Bluetooth
technology within range and lists them.
Tip: If you have sent data using Bluetooth
connectivity before, a list of the previous search
results is displayed. To search for more Bluetooth
devices, select More devices.
Pair devices
Select
> Settings > Connectivity > Bluetooth.
Open the paired devices tab.
Before pairing, decide on your own passcode (1-16 digits),
and agree with the user of the other device to use the same
code. Devices that do not have a user interface have a fixed
passcode. You need the passcode only when you connect the
devices for the first time. After pairing, it is possible to
authorise the connection. Pairing and authorising the
connection makes connecting quicker and easier, as you do
not have to accept the connection between paired devices
every time you establish a connection.
6. Select the device with which you want to connect. If the
other device requires pairing before data can be
transmitted, you are asked to enter a passcode.
When the connection has been established, Sending data is
displayed.
The Sent folder in the Messaging application does not store
messages sent using Bluetooth connectivity.
To receive data using Bluetooth connectivity, select
Bluetooth > On and My phone's visibility > Shown to
The passcode for remote SIM access must have 16 digits.
58
© 2009 Nokia. All rights reserved.
Connectivity
To use a Bluetooth audio accessory such as a Bluetooth
1. Select Options > New paired device. The device starts
to search for Bluetooth devices within range. If you have
handsfree or headset, you need to pair your device with the
sent data using Bluetooth connectivity before, a list of the accessory. For the passcode and further instructions, see the
previous search results is displayed. To search for more
accessory user guide. To connect to the audio accessory,
switch on the accessory. Some audio accessories connect
automatically to your device. Otherwise, open the paired
devices tab, select the accessory and Options > Connect to
audio device.
Bluetooth devices, select More devices.
2. Select the device with which you want to pair, and enter
the passcode. The same passcode must be entered to the
other device as well.
3. Select Yes to make the connection between your device
and the other device automatic, or No to confirm the
connection manually every time a connection attempt is
made. After pairing, the device is saved to the paired
devices page.
To give a nickname to the paired device, select Options >
Assign short name. The nickname is only displayed in your
device.
To delete a pairing, select the device whose pairing you want
to delete and Options > Delete. To delete all pairings, select
Options > Delete all. If you are currently connected to a
device and cancel the pairing with that device, pairing is
removed immediately, and the connection is ended.
Block devices
Select
> Settings > Connectivity > Bluetooth.
To block a device from establishing a Bluetooth connection
to your device, open the paired devices tab. Select a device
you want to block and Options > Block.
To unblock a device, open the blocked devices tab, and select
Options > Delete. To unblock all blocked devices, select
Options > Delete all.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests from
this device. If you accept the query, the remote device is
added to the list of blocked devices.
To allow a paired device to connect automatically to your
device, select Set as authorised. Connections between your
device and the other device can be made without your
knowledge. No separate acceptance or authorisation is
needed. Use this status for your own devices, such as your
compatible headset or computer, or devices that belong to
someone you trust. If you want to accept connection requests
from the other device separately every time, select Set as
unauthorised.
Data cable
To avoid damaging the memory card or corrupting data, do
not disconnect the USB data cable during a data transfer.
Transfer data between your device and a PC
1. Insert a memory card in your device, and connect the
device to a compatible PC using the USB data cable.
© 2009 Nokia. All rights reserved.
59
Green tips
2. When the device asks which mode to use, select Mass
storage. In this mode, you can see your device as a
removable hard drive in the PC.
Sync enables you to synchronise your notes, calendar entries,
text and multimedia messages, browser bookmarks, or
contacts with various compatible applications on a
compatible computer or on the internet.
3. Transfer the desired data between the PC and your device.
You may receive synchronisation settings in a special
4. End the connection from the PC (for example, from an
Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card.
message from your service provider.
A synchronisation profile contains the necessary settings for
synchronisation.
To modify the USB mode settings, select
> Settings >
Connectivity > USB.
When you open the Sync application, thedefaultor previously
used sync profile is displayed. To modify the profile, scroll to
a sync item, and select Mark to include it in the profile or
Unmark to leave it out.
To change the USB mode you normally use with the data
cable, select USB connection mode.
To set the device to ask which mode to use each time you
connect the USB data cable to the device, select Ask on
connection > Yes.
To manage sync profiles, select Options and the desired
option.
To synchronise data, select Options > Synchronise. To
To use Nokia PC Suite with your device, install Nokia PC Suite
cancel synchronisation before it finishes, select Cancel.
on your PC, connect the USB data cable, and select PC Suite.
Sync
Select
> Settings > Connectivity > Sync.
20. Green tips
Here are tips on how you can contribute to
protecting the environment.
Save energy
When you have fully charged the battery and disconnected
the charger from the device, remember to also unplug the
charger from the wall outlet.
You do not need to charge your battery so often if you do the
following:
60
© 2009 Nokia. All rights reserved.
Green tips
● Close and disable applications, services, and connections
Learn more
when you are not using them.
For more information on the environmental attributes of
● Decrease the brightness of the screen.
● Set the device to enter the power saver mode after the
minimum period of inactivity, if available in your device.
● Disable unnecessary sounds, such as keypad tones. Set the
volume of your device to an average level.
Recycle
Did you remember to recycle your old device? 65-80% of the
materials in a Nokia mobile phone can be recycled. Always
return your used electronic products, batteries, and
packaging materials to a dedicated collection point. By doing
this, you help prevent uncontrolled waste disposal and
promote the recycling of materials. Check how to recycle your
You may recycle the packaging and user guides at your local
recycling scheme.
Save paper
This user guide helps you get started with your device. For
more comprehensive instructions, open the help function
that is included in your device (in most applications, select
© 2009 Nokia. All rights reserved.
61
Accessories
For availability of approved accessories, please check with
your dealer. When you disconnect the power cord of any
accessory, grasp and pull the plug, not the cord.
Battery
Safe removal. Always switch the device off and disconnect the
charger before removing the battery.
Battery and charger information
Your device is powered by a rechargeable battery. The battery
intended for use with this device is BL-5CT. Nokia may make
additional battery models available for this device. This
device is intended for use when supplied with power from
the following chargers: AC-8. The exact charger model
number may vary depending on the type of plug. The plug
variant is identified by one of the following: E, EB, X, AR, U, A,
C, K, or UB.
Proper charging. Unplug the charger from the electrical plug
and the device when not in use. Do not leave a fully charged
battery connected to a charger, since overcharging may
shorten its lifetime. If left unused, a fully charged battery will
lose its charge over time.
Avoid extreme temperatures. Always try to keep the battery
between 15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and lifetime of the battery.
A device with a hot or cold battery may not work temporarily.
Battery performance is particularly limited in temperatures
well below freezing.
The battery can be charged and discharged hundreds of
times, but it will eventually wear out. When the talk and
standby times are noticeably shorter than normal, replace
the battery. Use only Nokia approved batteries, and recharge
your battery only with Nokia approved chargers designated
for this device.
Do not short-circuit. Accidental short-circuiting can occur
when a metallic object such as a coin, clip, or pen causes
direct connection of the positive (+) and negative (-)
If a battery is being used for the first time or if the battery
has not been used for a prolonged period, it may be necessary
to connect the charger, then disconnect and reconnect it to
begin charging the battery. If the battery is completely
discharged, it may take several minutes before the charging
indicator appears on the display or before any calls can be
made.
terminals of the battery. (These look like metal strips on the
battery.) This might happen, for example, when you carry a
spare battery in your pocket or purse. Short-circuiting the
terminals may damage the battery or the connecting object.
Disposal. Do not dispose of batteries in a fire as they may
explode. Dispose of batteries according to local regulations.
62
© 2009 Nokia. All rights reserved.
Taking care of your device
Please recycle when possible. Do not dispose as household
waste.
Authenticate hologram
1. When you look at the hologram on
the label, you should see the Nokia
connecting hands symbol from one
angle and the Nokia Original
Leak. Do not dismantle, cut, open, crush, bend, puncture, or
shred cells or batteries. In the event of a battery leak, prevent
battery liquid contact with skin or eyes. If this happens, flush
the affected areas immediately with water, or seek medical
help.
Enhancements logo when looking
from another angle.
Damage. Do not modify, remanufacture, attempt to insert
foreign objects into the battery, or immerse or expose it to
water or other liquids. Batteries may explode if damaged.
2. When you angle the hologram left,
right, down and up, you should see 1,
2, 3 and 4 dots on each side
respectively.
Correct use. Use the battery only for its intended purpose.
Improper battery use may result in a fire, explosion, or other
hazard. If the device or battery is dropped, especially on a
hard surface, and you believe the battery has been damaged,
take it to a service centre for inspection before continuing to
use it. Never use any charger or battery that is damaged. Keep
your battery out of the reach of small children.
Successful completion of the steps is not
a total assurance of the authenticity of
the battery. If you cannot confirm
authenticity or if you have any reason to
believe that your Nokia battery with the
hologram on the label is not an authentic
Nokia battery, you should refrain from
using it, and take it to the nearest Nokia authorised service
centre or dealer for assistance.
Nokia battery authentication
guidelines
To find out more about original Nokia batteries, see
that you are getting an original Nokia battery, purchase it
from a Nokia authorised service centre or dealer, and inspect
the hologram label using the following steps:
Taking care of your device
Your device is a product of superior design and craftsmanship ● Keep the device dry. Precipitation, humidity, and all types
and should be treated with care. The following suggestions
of liquids or moisture can contain minerals that will
corrode electronic circuits. If your device does get wet,
will help you protect your warranty coverage.
© 2009 Nokia. All rights reserved.
63
Taking care of your device
remove the battery, and allow the device to dry completely ● Backup all data you want to keep, such as contacts and
before replacing it.
calendar notes.
performance, power off the device and remove the
battery.
moving parts and electronic components can be damaged.
● Do not store the device in high or cold temperature. High
temperatures can shorten the life of electronic devices,
These suggestions apply equally to your device, battery,
damage batteries, and warp or melt certain plastics. When charger, or any accessory.
the device warms to its normal temperature from a cold
temperature, moisture can form inside the device and
Recycle
damage electronic circuit boards.
Always return your used electronic products, batteries, and
● Do not attempt to open the device other than as instructed
packaging materials to dedicated collection points. This way
you help prevent uncontrolled waste disposal and promote
the recycling of materials. Check product environmental
information and how to recycle your Nokia products at
in this guide.
● Do not drop, knock, or shake the device. Rough handling
can break internal circuit boards and fine mechanics.
● Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the device. Only use a soft, clean, dry
cloth to clean the surface of the device.
The crossed-out wheeled-bin symbol on your product,
battery, literature, or packaging reminds you that all
electrical and electronic products, batteries, and
accumulators must be taken to separate collection at
the end of their working life. This requirement applies in the
European Union. Do not dispose of these products as
unsorted municipal waste. For more environmental
information, see the product Eco-Declarations at
● Do not paint the device. Paint can clog the moving parts
and prevent proper operation.
● Use only the supplied or an approved replacement
antenna. Unauthorised antennas, modifications, or
attachments could damage the device and may violate
regulations governing radio devices.
● Use chargers indoors.
64
© 2009 Nokia. All rights reserved.
Additional safety information
Additional safety information
Implanted medical devices
Small children
Manufacturers of medical devices recommend a minimum
separation of 15.3 centimetres (6 inches) between a wireless
device and an implanted medical device, such as a pacemaker
or implanted cardioverter defibrillator, to avoid potential
interference with the medical device. Persons who have such
devices should:
Your device and its accessories are not toys. They may contain
small parts. Keep them out of the reach of small children.
Operating environment
This device meets RF exposure guidelines in the normal use
position at the ear or at least 2.2 centimetres (7/8 inch)away
from the body. Any carry case, belt clip, or holder for body-
worn operation should not containmetal and should position
the device the above-stated distance from your body.
● Always keep the wireless device more than 15.3
centimetres (6 inches) from the medical device.
● Not carry the wireless device in a breast pocket.
● Hold the wireless device to the ear opposite the medical
To send data files or messages requires a quality connection
to the network. Data files or messages may be delayed until
such a connection is available. Follow the separation distance
instructions until the transmission is completed.
device.
● Turn the wireless device off if there is any reason to
suspect that interference is taking place.
● Follow the manufacturer directions for the implanted
medical device.
Medical devices
If you have any questions about using your wireless device
with an implanted medical device, consult your health care
provider.
Operation of radio transmitting equipment, including
wireless phones, may interfere with the function of
inadequately protected medical devices. Consult a physician
or the manufacturer of the medical device to determine
whether they are adequately shielded from external RF
energy. Switch off your device when regulations posted
instruct you to do so. Hospitals or health care facilities may
use equipment sensitive to external RF energy.
Hearing aids
Some digital wireless devices may interfere with some
hearing aids.
© 2009 Nokia. All rights reserved.
65
Additional safety information
clearly marked. They include areas where you would be
advised to turn off your vehicle engine, below deck on boats,
chemical transfer or storage facilities and where the air
contains chemicals or particles such as grain, dust, or metal
powders. You should check with the manufacturers of
vehicles using liquefied petroleum gas (such as propane or
butane) to determine if this device can be safely used in their
vicinity.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles such as
electronic fuel injection, electronic antilock braking,
electronic speed control, and air bag systems. For more
information, check with the manufacturer of your vehicle or
its equipment.
Only qualified personnel should service the device or install
the device in a vehicle. Faulty installation or service may be
dangerous and may invalidate your warranty. Check regularly
that all wireless device equipment in your vehicle is mounted
and operating properly. Do not store or carry flammable
liquids, gases, or explosive materials in the same
Emergency calls
Important: This device operates using radio signals,
wireless networks, landline networks, and user-programmed
functions. If your device supports voice calls over the internet
(internet calls), activate both the internet calls and the
cellular phone. The device may attempt to make emergency
calls over both the cellular networks and through your
internet call provider if both are activated. Connections in all
conditions cannot be guaranteed. You should never rely
solely on any wireless device for essential communications
like medical emergencies.
compartment as the device, its parts, or accessories.
Remember that air bags inflate with great force. Do not place
your device or accessories in the air bag deployment area.
Switch off your device before boarding an aircraft. The use of
wireless teledevices in an aircraft may be dangerous to the
operation of the aircraft and may be illegal.
Potentially explosive environments
To make an emergency call:
Switch off your device in any area with a potentially explosive
atmosphere. Obey all posted instructions. Sparks in such
areas could cause an explosion or fire resulting in bodily
injury or death. Switch off the device at refuelling points such
as near gas pumps at service stations. Observe restrictions in
fuel depots, storage, and distribution areas; chemical plants;
or where blasting operations are in progress. Areas with a
potentially explosive atmosphere are often, but not always,
1. If the device is not on, switch it on. Check for adequate
signal strength. Depending on your device, you may also
need to complete the following:
● Insert a SIM card if your device uses one.
● Remove certain call restrictions you have activated in
your device.
66
© 2009 Nokia. All rights reserved.
Additional safety information
● Change your profile from Offline or Flight profile to an the device is designed to use only the power required to reach
active profile.
the network. That amount changes depending on a number
of factors suchas howclose youare to anetwork base station.
2. Press the end key as many times as needed to clear the
display and ready the device for calls.
The highest SAR value under the ICNIRP guidelines for use of
the device at the ear is 1.24 W/kg.
location. Emergency numbers vary by location.
Use of device accessories may result in different SAR values.
SAR values may vary depending on national reporting and
testing requirements and the network band. Additional SAR
information may be provided under product information at
4. Press the call key.
When making an emergency call, give all the necessary
information as accurately as possible. Your wireless device
may be the only means of communication at the scene of an
accident. Do not end the call until given permission to do so.
Certification information (SAR)
This mobile device meets guidelines for exposure to
radio waves.
Your mobile device is a radio transmitter and receiver. It is
designed not to exceed the limits for exposure to radio waves
recommended by international guidelines. These guidelines
were developed by the independent scientific organisation
ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines for mobile devices employ a unit of
measurement known as the Specific Absorption Rate or SAR.
The SAR limit stated in the ICNIRP guidelines is 2.0 watts/
kilogram (W/kg) averaged over 10 grams of tissue. Tests for
SAR are conducted using standard operating positions with
the device transmitting at its highest certified power level in
all tested frequency bands. The actual SAR level of an
operating device can be below the maximum value because
© 2009 Nokia. All rights reserved.
67
Index
security 57
speed dialling 21
voice mail 21
A
sending data 57
Bluetooth connectivity
blocking devices 59
browser
access codes 17
camera
accessories
capturing images 39
toolbar 39
settings 52
video clips 40
charging the battery 10
Clock
settings 48
computer connections 57
See also data connections
conference calls 21
configuration settings 11
connection methods
Bluetooth 57
application settings 51
audio messages 33
auto-update for time/date 47
autolock period 51
cable 59
cache memory 41
calculator 50
calendar 47
creating entries 47
call barring 24
call divert 24
caller ID 23
B
data cable 59
background image 46
barring password 17
battery
connections
PC connection 42
contact information 19
contacts 37, 38
adding ringing tones 38
contact groups 38
synchronising 60
converter 49
calls
charge level 15
charging 10
answering 22
call waiting 23
caller ID 23
inserting
9
removing 12
blogs 41
Bluetooth
making 20
currency
rejecting 22
converter 49
pairing 58
customer service 19
selecting type 23
settings 23
passcode 58
receiving data 57
68
© 2009 Nokia. All rights reserved.
Index
D
H
M
data connections
PC connectivity 57
synchronisation 60
date and time 47
device manager 54
dictionary 48
headphones 18
headset 18
maintenance 19
making a call 20
maps 29
help application 18
home screen 14
browsing 30
indicators 30
I
media
display
radio 27
meetings 36
memory
See also browser
web cache 41
memory card 9, 12
menu 16
E
e-mail
menu view 16
messages
K
accounts 37
adding attachments 35
deleting 36
keyguard 17
keypad
call rejection messages 23
MMS (multimedia message
service) 33
disconnecting 37
downloading attachments 36
folders 37
lock settings 51
keypad lock 17
modem 42
multimedia messages 33
music player
general settings 37
out-of-office reply 37
reading 35
L
playing 26
language
transferring music 27
music search 27
My Nokia 19
searching 36
changing 32
lock code 51
locking
N
F
keypad 51
network
feeds, news 41
FM radio 27
settings 25
news feeds 41
notes 51
locking device 17
log 22
© 2009 Nokia. All rights reserved.
69
Index
configuration 11
keypad lock 51
network 25
O
R
offline 14
operator
radio 27
listening 27
restoring 52
remote configuration 54
remote lock 17
selecting 25
settings wizard 11
Share online
Ovi 44, 45
activating services 42
creating posts 43
subscribing 42
share online 42
signal strength 15
SIM card
Ovi Contacts 45
Ovi Files 45
screen saver 46
Search 44
inserting
9
P
removing 12
pairing
SMS (short message service) 33
software update 19
software updates 55
speed dialling 21
search
devices 58
passcode 58
PDF reader 48
personalisation 46
PIN 17
music 27
security
Bluetooth 57
device and SIM card 51
web browser 41
security code 17
security module 17
sending
support information 19
switching the device on and
off 11
PIN code
changing 51
power saver 16
profiles
synchronisation of data 60
T
settings
text
creating 46
customising 46
PUK 17
letter mode 31
number mode 31
predictive input 32
traditional input 31
text messages
sending 33
active notes 50
applications 51
calls 23
clock 48
70
© 2009 Nokia. All rights reserved.
Index
themes
volume control 16
changing 46
W
downloading 46
time and date 47
toolbar
web connection 40
web logs 41
camera 39
writing language 32
traditional text input 31
Z
U
Zip manager 51
updates
UPIN 17
UPIN code
changing 51
USB data cable 59
V
video calls 23
making a call 22
switching to voice call 22
Video Centre 43
video centre
viewing 43
voice dialling 21
voice mail
calling 21
changing number 21
© 2009 Nokia. All rights reserved.
71
|