IDE3510U2
IDE3510U2GB
Instruction Manual
IDE Hard Drive Enclosure
3.5” Black External USB 2.0 IDE
Hard Drive Enclosure
Table of Contents
Introduction..................................................................... 1
Packaging Contents.....................................................................1
System Requirements.................................................................1
Front View....................................................................................2
Rear View ....................................................................................2
Installation....................................................................... 3
Hardware Installation...................................................................3
Driver Installation.........................................................................4
Verifying Installation.....................................................................4
How to Use ...................................................................... 4
Specifications.................................................................. 6
Technical Support........................................................... 7
Warranty Information...................................................... 7
i
Introduction
The IDE3510U2/GB USB 2.0 IDE Hard Drive Enclosure provides cost-
effective external storage, letting you connect a 3.5” IDE hard drive to a
computer through USB 2.0, perfect for extending the useful life of older
IDE (ATA) hard drives.
Packaging Contents
• 1 x IDE3510U2/GB hard drive enclosure
• 1 x USB cable
• 1 x Enclosure Stand
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• 3.5” ATA/66/100/133 hard drive
• Microsoft Windows 2000/XP/Vista/7, Mac OS X, or Linux
1
Front View
Thumb screws
Disk Activity
LED
Power
LED
Rear View
Power connector
USB
connector
Power Switch
2
Installation
WARNING: Hard drives require careful handling, especially when
being transported. If you are not careful with your hard disk, lost data
may result. Always handle your hard drive and storage device with
caution.
Hardware Installation
1. Remove the 4 thumb screws from both sides of the enclosure (8
thumb screws in total) and remove the side panels.
2. Lay the hard drive into the drive tray and connect the IDE ribbon
cable and LP4 molex power connectors to the hard drive.
3. Turn the enclosure over, or onto it’s side and use the 4 small drive
screws (included) to secure the hard drive from below.
4. Once the drive is securely mounted, replace the side panels with the
thumb screws.
5. Connect the power cable a power outlet and into the rear of the
enclosure. Switch the enclosure on, by setting the switch to ‘1’.
6. Connect the USB cable from rear of the enclosure to the computer.
3
Driver Installation
Windows 2000/XP/Vista/7, Mac OS X, Linux
No driver installation is required for these operating systems, as this
enclosure is natively supported, so the drivers are already installed.
Verifying Installation
Windows 2000/XP/Server 2003/Vista
From the main desktop, right-click on “My Computer” (“Computer” in
Vista), then select Manage. In the new Computer Management window,
select Device Manager from the left window panel.
Double-click on the “Disk Drives” option. A new disk drive should be
listed under this category. It will typically contain the make/model of
the hard drive you have installed in the enclosure.
How to Use
Windows 2000/XP/Server 2003/Vista
1. If a new hard drive does not show up in My Computer, right-click on
My Computer, and select Manage.
4
2. Select Disk Management, in the left pane. In the right pane, you
should notice the new hard drive:
3. Right-click on the Unallocated block, and select New Partition.
4. This will launch the New Partition Wizard. Please follow the
instruction provided by the Wizard, to partition the drive for use.
5. Once the partition has been created, the drive installed within the
hard drive enclosure will be recognized as a New Volume in Disk
Management, as well as in My Computer:
5
Specifications
Bus Interface
USB 2.0
1 x USB type B
1 x Power Connector
Initio INIC-151
Power, Activity
USB: 480Mb/s
External Connectors
Chipset
LEDs
Maximum Data Transfer Rate
3.5” ATA/66/100/133 hard drive
up to 750GB in capacity
Hard Drive Compatibility
Power Adapter
Dimensions
Weight
12VDC, 2A, center positive
222.0mm x 33.0mm x 124.0mm
499g
Compatible Operating
Systems
Windows 2000/XP/Vista/7, Mac
OS X, Linux
6
Technical Support
StarTech.com’s lifetime technical support is an integral part of our
commitment to provide industry-leading solutions. If you ever need
our comprehensive selection of online tools, documentation, and
downloads.
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in
materials and workmanship for the periods noted, following the initial
date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion.
The warranty covers parts and labor costs only. StarTech.com does
not warrant its products from defects or damages arising from misuse,
abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA
LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid
for the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
7
StarTech.com has been making “hard-to-find easy” since 1985,
providing high quality solutions to a diverse IT and A/V customer
base that spans many channels, including government, education
and industrial facilities to name just a few. We offer an unmatched
selection of computer parts, cables, A/V products, KVM and Server
Management solutions, serving a worldwide market through our
locations in the United States, Canada, the United Kingdom and
Taiwan.
our products and to access exclusive interactive tools such as the
Cable Finder, Parts Finder and the KVM Reference Guide.
|