POLERMO Projection Clock
with Motion Alert
Model: RMR939PA / MSR939A
USER MANUAL
RMR939PA English Cover R5
1
9/21/04, 2:40 PM
Notices .................................................................... 23
Statement of Responsibility ................................. 23
About Oregon Scientific ........................................ 23
FCC Statement ....................................................... 24
Declaration of Conformity .................................... 24
INTRODUCTION
Thank you for selecting the Oregon ScientificTM
POLERMO Projection Clock with Motion Alert. This
device is designed to give you many years of reliable
service, including the following conveniences:
•
•
US Atomic Calendar Clock
Optional Wireless Vibration Alarm with 8-Minute
Snooze Function (Wake-Up Vibrating Alarm
VR101A can be purchased separately)
•
•
•
•
•
•
•
•
•
Sleep Function with 6 Soothing Sounds
5 Alarm Melodies with 2 Volume Levels
2-Minute Dual Alarm with 8-Minute Snooze Function
Time / Alarm Status Projection Unit
Security Alarm / Motion Sensor Unit
Indoor Temperature Display
Day of the Week in 1 of 5 Languages
Time Zone Hour Offset Function
Backlight for Clock
Keep this manual handy as you use your new product.
It contains practical step-by-step instructions, as well
as technical specifications and warnings you should
know.
2
RMR939PA English R5
2
9/21/04, 2:40 PM
PRODUCT OVERVIEW
FRONT VIEW
1
2
1. SOUND / SLEEP button
•
•
Press to turn the soothing sound ON.
Press to wrap around the sleep timer setting as
follows: 0
minutes.
120
90
60
30
15
3
0
•
Press and hold for 2 seconds to choose 1 of
6 soothing sounds.
6
7
2. SNOOZE / LIGHT button
4
5
•
•
Press to activate the 8-minute snooze function.
Press and hold for 2 seconds to turn snooze OFF
and reset the alarm for the next day.
8
•
Press to activate the backlight and projection for
5 seconds.
3. LCD display
4. CLOCK ALARM button
•
Press to toggle between alarm 1 and alarm 2 -
ON / OFF.
•
Press and hold for 2 seconds to enter the Alarm
Time Setting Mode.
5. MOTION ALARM button
•
Press to enter the Motion Alarm Mode; press
again to toggle between motion alarm ON / OFF.
3
RMR939PA English R5
3
9/21/04, 2:40 PM
•
Press and hold for 2 seconds to enter:
-
-
Motion Sensor Code.
MotionAlarm Setting Mode for motion alarm
period and alarm type.
6. Projector
Projects time and alarm status.
7. CLOCK button
•
Press to toggle between the following display
modes:
-
-
-
Clock with seconds and calendar.
Clock with weekday and calendar.
Clock with time zone hour offset and calendar.
•
Press and hold for 2 seconds to enter the
Clock Setting Mode - US time zone hour offset,
12- / 24-hour format, hour, minute, year, MM / DD
or DD / MM format, month, day and day of the
week language.
8.
UP /
DOWN button
•
•
Press to increase or decrease a setting.
Press and hold for 2 seconds to activate or
deactivate atomic clock.
•
Press to increase or decrease the soothing sound
volume.
4
RMR939PA English R5
4
9/21/04, 2:40 PM
BACK VIEW
1. Projector FOCUS knob
Twist to focus the projected image.
2. Projector IMAGE ROTATION knob
•
1
•
Twist to get the best viewing angle of the projected
image.
6
3. PROJECTION ON switch
•
Slide to ON for continuous image projection when
the AC power is connected.
2
3
4
4. Projector 180° ROTATION button
Press to rotate the image upside down.
5
•
7
8
5. 6V AC / DC Power Socket
6. Battery Compartment (cover on)
•
Uses 4 x UM-3 / AA 1.5V batteries.
7. RESET hole
Insert a thin blunt instrument to return all values
to the default settings.
8. °C / °F switch
Press to select between °C / °F display format.
•
•
5
RMR939PA English R5
5
9/21/04, 2:40 PM
LCD DISPLAY
1. SOUND
1
2
10
11
•
Appears when the sleep function is activated.
3
4
2. Battery Low icon
5
6
•
Appears when the clock batteries are low or, no
batteries are installed and only the AC adaptor is
connected.
12
13
7
8
3. Time
14
15
•
HH / MM, 12- / 24-Hour, AM / PM.
16
4. ZONE
17
18
19
9
•
Appears when you are in the Time and Zone Hour
Offset display.
5. Channel 1 / 2
Ch.1 or Ch.2 will appear when the related motion
sensor is activated.
•
6. Motion Alarm ON icon
7. Calendar
•
DD / MM / YY or MM / DD / YY.
8. Temperature
°C / °F.
9. Atomic Clock Signal Reception icon
•
•
Shows the strength of the reception signal.
6
RMR939PA English R5
6
9/21/04, 2:40 PM
10. MIN
•
Appears when the sleep function is activated.
11. Time Zone Hour Offset / Day of the Week
•
Offsets the atomic clock time setting when you
are in a different time zone (+ / -23 hours).
•
Name of day available in 1 of 5 languages.
12. START
•
Start time for the motion sensor to be activated.
13. Alarm 1
•
Indicator to show this is alarm 1.
14. Alarm 1 / 2 Time
•
Shows alarm times / AM or PM.
15. Melody Alarm icon
•
Shows when the clock alarm is set.
16. Vibration Alarm icon (Wake-Up Vibration Alarm -
optional item)
•
Appears on the display when the vibrating alarm
has been set.
17. Alarm 2
•
Indicator to show this is alarm 2.
18. STOP
•
Stop time for the motion sensor.
19. Motion Alarm Settings icon
7
RMR939PA English R5
7
9/21/04, 2:40 PM
REMOTE MOTION SENSOR (MSR939A) - FRONT VIEW
1. Rotary Motion Sensor
•
Detects motion and activates both alarms on the
remote motion sensor and main clock units in
accordance with the settings used.
1
•
Twist the knob to direct the sensor to the position
you want.
2. ALARM SOUND ON / OFF switch
•
Slide switch to ON - the sensor will sound the
alarm if it detects movement.
•
Slide switch to OFF - the alarm sound function
will be turned off.
5
2
3
3. POWER ON / OFF
•
Slide to turn the motion sensor ON or OFF.
4. 4.5V Adaptor Socket (adaptor not included)
5. Motion Alarm Speaker
4
6. LED Indicator
6
8
RMR939PA English R5
8
9/21/04, 2:40 PM
REMOTE MOTION SENSOR (MSR939A) - BACK VIEW
1. Wall Mount
2. Battery Compartment (cover on)
•
Uses 3 x UM-3 / AA 1.5V batteries.
3. CHANNEL 1 / 2
•
Slide to select either Channel 1 or Channel 2.
4. CODE switch
1
2
•
Slide to change the Code.
5. RESET hole
•
Insert a thin blunt instrument to return all values
to the default settings.
3
4
5
9
RMR939PA English R5
9
9/21/04, 2:40 PM
•
•
Keep your product away from hot, humid conditions
or strong sunlight.
SAFETY AND CARE
SAFETY PRECAUTIONS
Every effort has been made to ensure the highest
standards of reliability for your clock with remote
motion sensor. However, if something does go
wrong, please do not try to repair it yourself - consult
your supplier.
Please observe the following safety precautions when
setting up and using this product.
•
LCD panel - The LCD panel is made of glass, and
may break if the unit is dropped.
•
Do not use your product outdoors in the rain, or
handle it with wet hands - water can damage
electrical equipment.
•
Heat sources - Keep the product away from heat
sources, such as radiators, stoves, heaters, and
other heat-generating products.
•
•
Water and moisture - Do not use the product in or
near water or in high moisture areas, such as a
bathroom.
GETTING STARTED
PACKAGE CONTENTS
Power source - The product may be susceptible to
power surges. It should be unplugged during severe
storms or whenever you will be away for a long time.
Only use the type of power source specified in this
manual. Do not overload power strips and extension
cords, as this can cause a fire hazard.
When you unpack your clock with remote motion sensor,
make sure you keep all the packing materials in a safe
place, in case you need to later transport the device or
return it for servicing.
In the box, you will find:
CARING FOR THIS PRODUCT
•
•
•
•
•
Clock Unit
To ensure you receive the maximum benefit from using
this product, please observe the following guidelines.
Remote Motion Sensor
•
Do not clean any part of the product with benzene,
thinner or other solvent chemicals - this may cause
permanent damage that is not covered by the
guarantee. When necessary, clean it with a damp
cloth.
4 x UM-3 / AA 1.5V Batteries for the Clock
6V AC / DC Adaptor for the Clock
3 x UM-3 / AA 1.5V Batteries for the Remote Motion
Sensor
10
RMR939PA English R5
10
9/21/04, 2:40 PM
|